All-in-one solar cell: Stable, light-soaking free, solution processed and efficient diketopyrrolopyrrole based small molecule inverted organic solar cells
Source abstract
Abstract
Abstract Organic solar cells (OSC) based on diketopyrrolopyrrole (DPP) small molecule have achieved relatively high efficiency (7%) in recent times. 2,5-di(2-ethylhexyl)-3,6-bis-(5″-n-hexyl-[2,2′,5′,2″]terthiophen-5-yl)-pyrrolo[3,4-c]pyrrole-1,4-dione (SMDPPEH) is the workhorse material for small molecule OSC as it has good solution-processing capability. However, there was no previous report on improving the device stability in inverted organic solar cells (IOSC) by using this material. Furthermore, the degradation and light-soaking behavior of this material in IOSC are also not well-addressed. In this work, we have fabricated a stable, light-soaking free, solution-processed and efficient SMDPPEH:PC61BM based IOSC for the first time. Fluorosurfactant modified PEDOT:PSS and fluorinated TiOx (F-TiOx) transport layers were used to circumvent the inherent processability and light-soaking issues. An exclusive study on the device stability and light-soaking characteristics were also carried out for the first time. The final device provides the following merits: (i) comparable material stability to P3HT polymer, suggesting a potential for further development of DPP materials for high-efficiency devices; (ii) F-TiOx can be used universally to fabricate a light-soaking free device with a wide range of photoactive materials from polymers to small molecules and; (iii) higher device efficiency compared to the non-inverted counterpart were obtained when the modified transport layers were used.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
2. 8.9% Single-stack inverted polymer solar cells with electron-rich polymer nanolayer-modified inorganic electron-collecting buffer layers10.1002/aenm.201301692 ↗
3. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
4. Stability of polymer solar cells10.1002/adma.201104187 ↗
5. Oxygen-and water-induced degradation of an inverted polymer solar cell: the barrier effect10.1117/1.3544010 ↗
6. Light-induced degradation of the active layer of polymer-based solar cells10.1016/j.polymdegradstab.2009.11.021 ↗
7. Light-induced degradation of the P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗
8. On the origin of the quadrant I semicircle in intensity-modulated photocurrent spectra of P3HT:PCBM bulk heterojunction solar cells: evidence of degradation-related trap-assisted recombination10.1021/jp310841v ↗
9. Heliatek GmbH, Heliatek consolidates its technology leadership by establishing a new world record for organic solar technology with a cell efficiency of 12%.
10. Influence of alkyl substituents and thermal annealing on the film morphology and performance of solution processed, diketopyrrolopyrrole-based bulk heterojunction solar cells10.1039/b912824g ↗
11. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
12. Manipulation of the open-circuit voltage of organic solar cells by desymmetrization of the structure of acceptor–donor–acceptor molecules10.1002/adfm.201101508 ↗
13. The influence of solubilizing chain stereochemistry on small molecule photovoltaics10.1002/adfm.201401030 ↗
14. A modular molecular framework for utility in small-molecule solution-processed organic photovoltaic devices10.1039/c1jm11963j ↗
15. Small molecule solution-processed bulk heterojunction solar cells10.1021/cm102189g ↗
16. Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit10.1021/ja403318y ↗
17. Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10%10.1021/ja509703k ↗
18. Small-molecule solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
19. A molecular nematic liquid crystalline material for high-performance organic photovoltaics10.1038/ncomms7013 ↗
20. High-mobility ambipolar near-infrared light-emitting polymer field-effect transistors10.1002/adma.200702775 ↗
21. Recent advances in the development of semiconducting dpp-containing polymers for transistor applications10.1002/adma.201201795 ↗
22. Solution-processed diketopyrrolopyrrole-containing small-molecule organic solar cells with 7.0% efficiency: in-depth investigation on the effects of structure modification and solvent vapor annealing10.1021/acs.chemmater.5b00848 ↗
23. A systematic approach to solvent selection based on cohesive energy densities in a molecular bulk heterojunction system10.1002/aenm.201000054 ↗
24. Effect of structural variation on photovoltaic characteristics of phenyl substituted diketopyrrolopyrroles10.1039/C3RA45662E ↗
25. A dual-functional additive improves the performance of molecular bulk heterojunction photovoltaic cells10.1039/c3ra46884d ↗
26. Carrier formation dynamics of a small-molecular organic photovoltaic10.1063/1.4800532 ↗
27. Nongeminate recombination and charge transport limitations in diketopyrrolopyrrole-based solution-processed small molecule solar cells10.1002/adfm.201202643 ↗
28. Effect of bathocuproine buffer layer in small molecule organic solar cells with inverted structure10.7567/JJAP.54.04DK06 ↗
29. Utilising solution processed zirconium acetylacetonate as an electron extracting layer in both regular and inverted small molecule organic photovoltaic cells10.1016/j.orgel.2015.04.019 ↗
30. Efficient solution-processed small-molecule solar cells with inverted structure10.1002/adma.201300295 ↗
31. Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer10.1016/j.orgel.2011.05.027 ↗
32. Organic solar cells using inverted layer sequence10.1016/j.tsf.2005.06.006 ↗
33. Use of fluorine-doped tin oxide instead of indium tin oxide in highly efficient air-fabricated inverted polymer solar cells10.1063/1.3374406 ↗
34. Stretchable organic solar cells10.1002/adma.201004426 ↗
35. UV light protection through TiO2 blocking layers for inverted organic solar cells10.1016/j.solmat.2011.08.004 ↗
36. Gravure printing for three subsequent solar cell layers of inverted structures on flexible substrates10.1016/j.solmat.2010.10.013 ↗
37. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
38. Development of inverted organic solar cells with TiO2 interface layer by using low-temperature atomic layer deposition10.1021/am302252p ↗
39. Transient characteristics of inverted polymer solar cells using titanium oxide interlayers10.1063/1.3455108 ↗
40. Overcoming the light-soaking problem in inverted polymer solar cells by introducing a heavily doped titanium sub-oxide functional layer
41. Addressing the light-soaking issue in inverted organic solar cells using chemical bath deposited fluorinated TiOx electron transport layer10.1039/C4TA05042H ↗
42. High efficient ITO free inverted organic solar cells based on ultrathin Ca modified AZO cathode and their light soaking issue10.1016/j.orgel.2014.08.042 ↗
43. Improved performance and stability of inverted organic solar cells with sol-gel processed, amorphous mixed metal oxide electron extraction layers comprising alkaline earth metals10.1002/aenm.201300308 ↗
44. Influence of novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells10.1039/c2jm35646e ↗
45. Device stability and light-soaking characteristics of high-efficiency benzodithiophene-thienothiophene copolymer based inverted organic solar cells with F-TiOx electron transport layer10.1021/acsami.5b02383 ↗
46. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
47. A low band gap, solution processable oligothiophene with a dialkylated diketopyrrolopyrrole chromophore for use in bulk heterojunction solar cells10.1063/1.3086897 ↗
48. Highly conductive and transparent PEDOT:PSS films with a fluorosurfactant for stretchable and flexible transparent electrodes10.1002/adfm.201101775 ↗
49. The role of solvent vapor annealing in highly efficient air-processed small molecule solar cells10.1039/c4ta01125b ↗
50. Increased efficiency in small molecule organic solar cells through the use of a 56-π electron acceptor-methano indene fullerene10.1038/srep08319 ↗
51. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
52. Efficient inverted polymer solar cells employing favourable molecular orientation10.1038/nphoton.2015.84 ↗
53. Barium: an efficient cathode layer for bulk-heterojunction solar cells
54. Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb10.1039/c0jm03105d ↗
55. Stability and structural aspects of diketopyrrolopyrrole pigment and its N-alkyl derivatives10.1016/j.dyepig.2010.10.001 ↗
56. A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance10.1021/ar1000296 ↗
57. D. Belluš, Photo-Fries rearrangement and related photochemical [1,j]-shifts (j=3, 5, 7) of carbonyl and sulfonyl groups," in Advances in Photochemistry, vol. 8, John Wiley & Sons, Inc., 2007, pp. 109–159.10.1002/9780470133385.ch3 ↗
58. Photo-oxidation of aromatic polymers10.1002/(SICI)1522-9505(19981201)261-262:1<173::AID-APMC173>3.0.CO;2-O ↗
59. Photodecomposition of aldehydes and ketones10.1038/1381016a0 ↗
60. Photo-decomposition of aldehydes and ketones10.1038/140195b0 ↗
61. A direct evidence of morphological degradation on a nanometer scale in polymer solar cells10.1002/adma.201302854 ↗
62. What parameters can be reliably deduced from the current-voltage characteristics of an organic bulk-heterojunction solar cell?10.1063/1.4913674 ↗
63. First step into space: performance and morphological evolution of P3HT:PCBM bulk heterojunction solar cells under AM 0 illumination10.1021/am504608p ↗
64. The mechanism of burn-in loss in a high efficiency polymer solar cell10.1002/adma.201103010 ↗
65. Voc from a morphology point of view: the influence of molecular orientation on the open circuit voltage of organic planar heterojunction solar cells10.1021/jp506180k ↗
66. Increased open-circuit voltage of organic solar cells by reduced donor-acceptor interface area10.1002/adma.201400114 ↗
67. Kinetics of light induced defect creation in organic solar cells10.1063/1.4789993 ↗
68. Efficient and ultraviolet durable inverted organic solar cells based on an aluminum-doped zinc oxide transparent cathode
69. Low band-gap polymers based on quinoxaline derivatives and fused thiophene as donor materials for high efficiency bulk-heterojunction photovoltaic cells10.1039/b823536h ↗
70. Photochemical stability of high efficiency PTB7: PC 70 BM solar cell blends10.1039/C4TA05641H ↗
71. The unusual electronic structure of ambipolar dicyanovinyl-substituted diketopyrrolopyrrole derivatives10.1039/C4TC00714J ↗
72. Raman spectroscopic studies of regioregular poly (3-alkylthiophenes)10.1021/jp960104p ↗
73. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
74. The influence of solubilizing chain stereochemistry on small molecule photovoltaics10.1002/adfm.201401030 ↗
75. A low band gap, solution processable oligothiophene with a dialkylated diketopyrrolopyrrole chromophore for use in bulk heterojunction solar cells10.1063/1.3086897 ↗
76. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly (3-hexylthiophene)10.1063/1.2008386 ↗
77. Nongeminate recombination and charge transport limitations in diketopyrrolopyrrole-based solution-processed small molecule solar cells10.1002/adfm.201202643 ↗
78. Effect of structural variation on photovoltaic characteristics of phenyl substituted diketopyrrolopyrroles10.1039/C3RA45662E ↗
79. A molecular nematic liquid crystalline material for high-performance organic photovoltaics10.1038/ncomms7013 ↗
80. Watching the annealing process one polymer chain at a time10.1002/ange.201007084 ↗