Flexible polymer solar cell modules with patterned vanadium suboxide layers deposited by an electro-spray printing method
Source abstract
Abstract
Abstract Vanadium suboxide (VOx) layers deposited by an electro-spray (e-spray) printing method were applied to the fabrication of high efficiency patterned polymer solar cell (PSC) modules. By tailoring surface tension and the atomization condition of the e-sprayed sol precursor, e-sprayed VOx layers on top of both hydrophilic and hydrophobic surfaces were successfully obtained, which enabled alternative architectures of conventional/inverted cells in a sub-module. The integrated PSC module that alternatively incorporated patterned metal oxide layer exhibited the high aperture power conversion efficiency (PCE) of 4.93% with a geometric fill factor (GFF) of 87%. Furthermore, we achieved the high aperture PCE of 4.72% on the flexible polyethylene terephthalate (PET) substrate comparable to that on the glass substrate which is applicable to large area roll-to-roll PSC module production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
2. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
3. Efficient tandem polymer solar cells fabricated by all-solution Processing10.1126/science.1141711 ↗
4. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
5. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
6. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
7. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
8. Slot-die coating parameters of the low-viscosity bulk-heterojunction materials used for polymer solar cells10.1016/j.solmat.2013.01.006 ↗
9. Roll‐to‐roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
10. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
11. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
12. A new architecture for printable photovoltaics overcoming conventional module limits10.1002/adma.201304235 ↗
13. Seamless polymer solar cell module architecture built upon self-aligned alternating interfacial layers10.1039/c3ee24454g ↗
14. New series connection method for bulk-heterojunction polymer solar cell modules10.1016/j.solmat.2011.11.008 ↗
15. Controlled electro-spray deposition of highly conductive PEDOT:PSS Films10.1016/j.solmat.2011.10.025 ↗
16. Morphology controlled bulk-heterojunction layers of fully electro-spray coated organic solar cells10.1016/j.solmat.2012.06.027 ↗
17. Solution processed vanadium pentoxide as charge extraction layer for organic solar cells10.1002/aenm.201100076 ↗
18. Inverted organic solar cells with sol–gel processed high work‐function vanadium oxide hole‐extraction layers10.1002/adfm.201101402 ↗
19. Electrostatically self‐assembled nonconjugated polyelectrolytes as an ideal interfacial layer for inverted polymer solar cells10.1002/adma.201200594 ↗
20. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
21. Performance optimization of polymer solar cells using electrostatically sprayed photoactive layers10.1002/adfm.201000433 ↗
22. Evaporation and discharge dynamics of highly charged multicomponent droplets generated by electrospray ionization10.1021/jp907162w ↗
23. Evaporation and discharge dynamics of highly charged droplets of heptane, octane, and p-xylene generated by electrospray ionization10.1021/ac025889b ↗
24. Lide · 1995
25. Low-temperature, solution-processed, layered V2O5 hydrate as the hole-transport layer for stable organic solar cells10.1039/c3ee42204f ↗