Enhanced photocurrent and stability of inverted polymer/ZnO-nanorod solar cells by 3-hydroxyflavone additive
Source abstract
Abstract
Abstract Both the performance and stability are the two major tasks for scientists to tackle in polymer solar cells. We introduce 3-hydroxyflavone (3-HF), a free-radical scavenging agent, as an additive in poly(3-hexythiophene):(6,6)-phenyl C61 butyric acid methyl ester (P3HT:PCBM) blend forming new photoactive material, which is used as an active layer in inverted solar cell devices. It was found that the addition of an adequate amount of 3-HF enhances the photocurrent, which is due to the improved carrier mobility. A power conversion efficiency (PCE) of the device has improved from 2.57% to 3.05%. In addition, 3-HF can further stabilize the inverted solar cell performance with a 85% retaining of its original PCE over a month in ambient condition as compared to the additive-free device of a value of 57%. Thus, incorporating 3-HF as an additive is an effective and simple method to approach the goal of high PCE while maintaining stable ambient operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Hybrid nanorod–polymer solar cells10.1126/science.1069156 ↗
2. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
3. A roll-to-roll process to flexible polymer solar cells: Model studies, manufacture, and operational stability studies10.1039/b823001c ↗
4. A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration10.1016/j.solmat.2008.12.001 ↗
5. Electronic excitations in luminescence conjugated polymers10.1016/S0038-1098(96)00715-6 ↗
6. Visible light sensitization of titanium dioxide using a phenylene vinylene polymer10.1016/S0009-2614(98)00163-8 ↗
7. Polymer solar cells based on a low-bandgap fluorene copolymer and a fullerene derivative with photocurrent extended to 850nm10.1002/adfm.200400416 ↗
8. Infrared photocurrent spectral response from plastic solar cell with low-band-gap polyfluorene and fullerene derivative10.1063/1.1825070 ↗
9. Low-bandgap alternating fluorene copolymer/methanofullerene heterojunctions in efficient near-infrared polymer solar cells10.1002/adma.200600124 ↗
10. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
11. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
12. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
13. Improvement in light harvesting and performance of P3HT-PCBM solar cell by using 9-10-diphenylanthracene10.1016/j.solmat.2009.04.012 ↗
14. High-performance polymer photovoltaic cells with thick P3HT:PCBM films prepared by a quick drying process10.1016/j.solmat.2009.04.015 ↗
15. Enhanced photovoltaic performance of polymer solar cells by adding fullerene end-capped polyethylene glycol10.1039/c0jm04559d ↗
16. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
17. Manufacture, integration and demonstration of polymer solar cells in a lamp for the Lighting Africa initiative10.1039/b918441d ↗
18. Product integration of compact roll-to-roll processed polymer solar cell modules: Methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
19. F.C. Krebs, J. Fyenbo, D.M. Tanenbaum, S.A. Gevorgyan, R. Andriessen, B. van Remoortere, Y. Galagan, M. Jørgensen, The OE-A OPV demonstrator anno domini 2011. Energy Environ. Sci. (2011) 〈http://dx.doi.org/10.1039/c1ee01891d〉.10.1039/c1ee01891d ↗
20. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
21. T. Currier, V. Shrotriya, G. Schwartz, F. C. Krebs, An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
22. Recent development of the inverted configuration organic solar cells10.1016/j.solmat.2011.02.002 ↗
23. Long term stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
24. High efficiency polymer solar cells with long operating lifetimes, Adv10.1002/aenm.201100138 ↗
25. Stability of the interface between indium-tin-oxide and poly(3.4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
26. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
27. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
28. Electrical and photo-induced degradation of ZnO layers in organic photovoltaics10.1002/aenm.201100227 ↗
29. Development of air stable polymer solar cells using an inverted gold on top anode structure10.1016/j.tsf.2004.10.018 ↗
30. Rice-Evans, · 2003
31. Packer · 1999
32. Flavonoids and Other Polyphenols
33. Arnoldi · 2004
34. The contribution of flavonoid C-ring on the DPPH free radical scavenging efficiency. A kinetic approach for the 3’,4’-hydroxy substituted members10.1016/j.ifset.2005.09.001 ↗
35. Reduction potentials of flavonoid and model phenoxyl radicals. Which ring in flavonoids is responsible for antioxidant activity?10.1039/p29960002497 ↗
36. Stability of ferric complexes with 3-hydroxyflavone (flavonol), 5.7-dihydroxyflavone (chrysin), and 3’,4’-dihydroxyflavone10.1021/jf048298q ↗
37. Iron-binding properties of plant phenolics and cranberry's bio-effects
38. Sol-gel preparation of ZnO films with extremely preferred orientation along (002) plane from zinc acetate solution10.1016/S0040-6090(97)00231-9 ↗
39. Growth of arrayed nanorods and nanowires of ZnO from aqueous solutions10.1002/adma.200390108 ↗
40. Effect of interchain interactions on the absorption and emission of poly 3-hexylthiophene10.1103/PhysRevB.67.064203 ↗
41. Extraction current transients: New method of study of charge transport in microcrystalline silicon10.1103/PhysRevLett.84.4946 ↗
42. Photogenerated carriers in μc-Si:H/a-Si:H multi-layers10.1016/j.jnoncrysol.2004.02.072 ↗
43. Influence of composition and heat treatment on the charge transport properties of poly(3-hexylthiophene) and (6,6)-phenyl C61 butyric acid methyl ester10.1063/1.2045554 ↗
44. Bipolar charge transport in poly(3-hexyl thiophene)/methanofullerene blends: A ration dependent study10.1063/1.3055608 ↗
45. Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods10.1016/j.orgel.2009.05.017 ↗
46. Investigation of high-performance air-processed poly(3-hexythiophene)/methanofullerene bulk-heterojunction solar cells10.1021/jp108886p ↗
47. Charge transport and photocurrent generation in poly(3-hexylthiophene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
48. Influence of composition and heat-treatment on the charge transport properties of poly(3-hexylthiophnen) and [6.6]-phenyl C61-butyric acid methyl ester blends10.1063/1.2045554 ↗
49. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
50. Lifetimes of organic photovoltaics: Combining chemical and physical characterisation techniques to study degradation mechanisms
51. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
52. The effect of C60 on the ZnO-nanorod surface in organic–inorganic hybrid photovoltaics10.1016/j.solmat.2010.10.015 ↗