journal article·2015-02

Effect of open-circuit voltage in organic solar cells based on various electron donor materials by inserting molybdenum trioxide anode buffer layer

Jhong-Ciao Ke, Yeong-Her Wang, Kan-Lin Chen, Chien-Jung Huang

Publisher page

Abstract

The effect of inserting a molybdenum oxide (MoO3) anode buffer layer into organic solar cells based on various electron donor materials was studied. The device was composed of an indium tin oxide (ITO)/MoO3/donor material/C60/bathocuproine/aluminum structure, and the donor materials were boron subphthalocyanine chloride (SubPc), rubrene, 2-[(7-{4-[N,N-bis(4-methylphenyl)amino]phenyl}-2,1,3-benzothiadiazol-4-yl)methylene]propanedinitrile (DTDCPB) and copper phthalocyanine (CuPc). Inserting a MoO3 buffer layer between ITO and donor layer resulted in the efficiency of device improvement from 1.04% to 2.49%, from 0.27% to 1.01%, and from 0.13% to 1.12% for the donor material of SubPc, rubrene, and DTDCPB, respectively. The result was ascribed to a greatly enhancement of open-circuit voltage (Voc), which originated from the work function improvement of ITO by covering MoO3 layer. However, the function of MoO3 was not evident in the device using CuPc as donor material. The interaction between MoO3 and CuPc was detected using UV–visible absorption and X-ray photoelectron spectroscopy. The electron transfer between MoO3 and CuPc caused the formation of an interface state at the MoO3/CuPc interface, resulting in Fermi-level pinning at the interface. Consequently, the efficiency of the CuPc/C60 heterojunction device cannot be improved by inserting a MoO3 anode buffer layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Polymer–fullerene bulk heterojunction solar cells10.1088/0034-4885/73/9/096401 ↗
2. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
3. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
4. Large area plastic solar cell module10.1016/j.mseb.2006.06.008 ↗
5. Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
6. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
7. Transition metal oxides as the buffer layer for polymer photovoltaic cells
8. Inspection of substrate-heated modified PEDOT: PSS morphology for all spray deposited organic photovoltaics10.1016/j.solmat.2010.03.013 ↗
9. Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV–ozone treated MoO3 as hole collecting buffer layer10.1016/j.solmat.2012.12.006 ↗
10. Roll-to-roll processing of inverted polymer solar cells using hydrated vanadium(V) oxide as a PEDOT:PSS replacement10.3390/ma4010169 ↗
11. Biris,optimization of the protonation level of polyaniline‐based hole‐transport layers in bulk‐heterojunction organic solar cells10.1002/ente.201300058 ↗
12. Role of tungsten oxide in inverted polymer solar cells
13. Improved photovoltaic characteristics of organic cells with heterointerface layer as a hole-extraction layer inserted between ITO anode and donor layer10.1016/j.orgel.2013.04.009 ↗
14. Independent control of open-circuit voltage of organic solar cells by changing film thickness of MoO3 buffer layer
15. Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
16. Limits of open circuit voltage in organic photovoltaic devices, Limits of open circuit voltage in organic photovoltaic devices
17. Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy10.1063/1.116313 ↗
18. High-efficiency inverted polymer solar cells with transparent and work-function tunable MoO3-Al composite film as cathode buffer layer10.1002/adma.201200238 ↗
19. Recombination in polymer-fullerene bulk heterojunction solar cells
20. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
21. Photochemical formation of the anion radical of zinc phthalocyanine and analysis of the absorption and magnetic circular dichroism spectral data. Assignment of the optical spectrum of [ZnPc(-3)]-10.1021/ja00083a015 ↗
22. Assignment of the optical spectra of metal phthalocyanine anions10.1021/ic960737i ↗
23. Transition assignments in the ultraviolet-visible absorption and magnetic circular dichroism spectra of phthalocyanines10.1021/ic0009829 ↗
24. Porphyrins: XV. Vapor absorption spectra and stability: Phthalocyanines10.1016/0022-2852(70)90040-8 ↗
25. Porphyrins XXVIII. Extended Hückel calculations on metal phthalocyanines and tetrazaporphins10.1007/BF00527632 ↗
26. Semiempirical molecular orbital studies of phthalocyanines10.1007/BF01046366 ↗
27. Semiempirical molecular orbital studies of phthalocyanines10.1007/BF00868856 ↗
28. Angle-resolved XPS measurements on copper phthalocyanine thin films10.1016/S0169-4332(01)00270-7 ↗
29. Experimental comparison of N(1s) X-ray photoelectron spectroscopy binding energies of hard and elastic amorphous carbon nitride films with reference organic compounds10.1016/S0008-6223(03)00170-2 ↗
30. Low operating-voltage and high power-efficiency OLED employing MoO3-doped CuPc as hole injection layer10.1016/j.displa.2011.10.002 ↗