journal article·2014-04

Using ultra-high molecular weight hydrophilic polymer as cathode interlayer for inverted polymer solar cells: Enhanced efficiency and excellent air-stability

Ping Cai, Shu Zhong, Xiaofeng Xu, Junwu Chen, Wei Chen, Fei Huang, Yuguang Ma, Yong Cao

Publisher page

Abstract

Abstract New cathode interlayers based on a water soluble cationic polyacrylamide (C-PAM) with a viscosity-averaged molecular weight of 3 million were introduced as cathode interlayers in inverted solar cells. The neat C-PAM and 5% CsF doped C-PAM thin layers on ITO substrate could decrease the work-function of ITO and hence lead to suitable energy level alignments for efficient electron collection. Obvious enhancements of energy conversion efficiency as well as air-stability were found, in comparison to well-known ZnO interlayer based device. The possible factors involving deteriorations at two interfaces of ITO/interlayer and interlayer/active layer during more than 1 year storage under an ambient condition were analyzed. Our results suggest that the interlayer polymer with giant molecular size and numerous side groups of hydrophilic amide and quaternary ammonium would facilitate the formations of large and intimate single-molecular binding area with the ITO substrate and the upper active layer, and might afford more reliable interfacial contacts to resist possible moisture- and/or stress-induced delamination. Therefore, hydrophilic polymer with an ultra-high molecular weight would be an ideal cathode interlayer for efficient and air-stable inverted solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
2. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
3. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
4. 2.5% Efficient organic plastic solar cells10.1063/1.1345834 ↗
5. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
6. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
7. Organic solar cells: a new look at traditional models10.1039/c1ee01663f ↗
8. Polymer solar cells10.1038/nphoton.2012.11 ↗
9. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
10. Overcoming efficiency challenges in organic solar cells: rational development of conjugated polymers10.1039/c2ee21608f ↗
11. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
12. Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: the effect of processing on the performance10.1002/adma.200800456 ↗
13. Development of new conjugated polymers with donor-π-bridge-acceptor side chains for high performance solar cells10.1021/ja9066139 ↗
14. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
15. Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cells10.1038/nchem.403 ↗
16. A planar copolymer for high efficiency polymer solar cells10.1021/ja9057986 ↗
17. An easily synthesized blue polymer for high-performance polymer solar cells10.1002/adma.201002225 ↗
18. Indene-C-60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
19. Enhanced photovoltaic performance of low-bandgap polymers with deep LUMO levels10.1002/anie.201003357 ↗
20. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
21. Semi-transparent polymer solar cells with 6% PCE, 25% average visible transmittance and a color rendering index close to 100 for power generating window applications10.1039/c2ee22623e ↗
22. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
23. Influences of the non-covalent interaction strength on reaching high solid-state order and device performance of a low bandgap polymer with axisymmetrical structural units10.1002/adma.201300098 ↗
24. Synthesis and photovoltaic effect in dithieno[2,3-d:2',3'-d']benzo[1,2-b:4,5-b']dithiophene-based conjugated polymers10.1002/adma.201204238 ↗
25. Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends10.1039/C2EE23235A ↗
26. A review on the development of the inverted polymer solar cell architecture10.1080/15583724.2010.515764 ↗
27. Combination of indene-C60 Bis-adduct and cross-linked fullerene interlayer leading to highly efficient inverted polymer solar cells10.1021/ja108259n ↗
28. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
29. Spray-coated ZnO electron transport layer for air-stable inverted organic solar cells10.1016/j.solmat.2011.09.045 ↗
30. Interface modification of a highly air-stable polymer solar cell10.1016/j.solmat.2011.11.032 ↗
31. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
32. High-efficiency inverted dithienogermole-thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
33. High-efficiency inverted solar cells based on a low bandgap polymer with excellent air stability10.1016/j.solmat.2011.09.042 ↗
34. Thermal-annealing-free inverted polymer solar cells using ZnO/Cs2CO3 bilayer as electron-selective layer10.1016/j.solmat.2012.04.022 ↗
35. Solution-processed zinc oxide nanoparticles as interlayer materials for inverted organic solar cells10.1016/j.solmat.2012.09.007 ↗
36. Effects of particle morphology of ZnO buffer layer on the performance of organic solar cell devices10.1016/j.solmat.2013.01.010 ↗
37. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
38. Interplay of nanoscale domain purity and size on charge transport and recombination dynamics in polymer solar cells10.1039/C3NR05177C ↗
39. Doping effect of electron transport layer on nanoscale phase separation and charge transport in bulk heterojunction solar cells10.1021/jp407017z ↗
40. Inverted and transparent polymer solar cells prepared with vacuum-free processing10.1016/j.solmat.2008.11.002 ↗
41. Self-propagating molecular assemblies as interlayers for efficient inverted bulk-heterojunction solar cells10.1021/ja104695p ↗
42. Efficiency enhancement in organic solar cells with ferroelectric polymers10.1038/nmat2951 ↗
43. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
44. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
45. Electrostatically self-assembled nonconjugated polyelectrolytes as an ideal interfacial layer for inverted polymer solar cells10.1002/adma.201200594 ↗
46. High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO10.1016/j.solmat.2011.09.030 ↗
47. Hydrophilic poly(triphenylamines) with phosphonate groups on the side chains: synthesis and photovoltaic applications10.1039/c1jm14970a ↗
48. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
49. High efficiency and high voc inverted polymer solar cells based on a low-lying HOMO polycarbazole donor and a hydrophilic polycarbazole interlayer on ITO cathode10.1021/jp3009546 ↗
50. Donor–acceptor interface modification by zwitterionic conjugated polyelectrolytes in polymer photovoltaics10.1039/c3ee00060e ↗
51. Largely enhanced efficiency with a PFN/Al bilayer cathode in high efficiency bulk heterojunction photovoltaic cells with a low bandgap polycarbazole donor10.1002/adma.201101319 ↗
52. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
53. Improved high-efficiency organic solar cells via incorporation of a conjugated polyelectrolyte interlayer10.1021/ja2037673 ↗
54. Acrylamide polymers
55. Novel electroluminescent conjugated polyelectrolytes based on polyfluorene10.1021/cm034650o ↗
56. Solution-processed zinc oxide thin film as a buffer layer for polymer solar cells with an inverted device structure10.1021/jp1003984 ↗
57. Direct correlation between work function of indium–tin-oxide electrodes and solar cell performance influenced by ultraviolet irradiation and air exposure10.1039/c2cp42448g ↗
58. Design of hole blocking layer with electron transport channels for high performance polymer light-emitting diode10.1002/adma.200702150 ↗
59. Highly efficient polymer white-light-emitting diodes based on lithium salts doped electron transporting layer10.1002/adma.200802179 ↗
60. Alkali metal salts doped pluronic block polymers as electron injection/transport layers for high performance polymer light-emitting diodes10.1007/s11426-012-4530-0 ↗
61. Optimized inverted polymer solar cells incorporating Cs2CO3-doped C60 as electron transport layer10.1063/1.4807388 ↗
62. Water-processable electron-collecting layers of a hybrid poly(ethylene oxide):cesium carbonate composite for flexible inverted polymer solar cells10.1016/j.solmat.2012.09.006 ↗
63. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
64. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
65. Stability of polymer solar cells10.1002/adma.201104187 ↗
66. Organic solar cells employing magnetron sputtered p-type nickel oxide thin film as the anode buffer layer10.1016/j.solmat.2010.08.004 ↗