Improving poly(3-hexylthiophene)-TiO2 heterojunction solar cells by connecting polypyrrole to the TiO2 nanorods
Source abstract
Abstract
Abstract A heterojunction solar cell is prepared from poly(3-hexylthiophene) (P3HT) and the purposely surface-modified TiO 2 nanorod array. The modification is carried out by connecting polypyrrole (PPy) to the TiO 2 nanorod array through an in-situ polymerization, which is initiated by photoexcited TiO 2 nanorods. The as-prepared composite films are investigated by using photoluminescence emission spectroscopy, electrochemical impedance spectroscopy and intensity modulated photovoltage spectroscopy. The analysis results demonstrate that modifying TiO 2 nanorod array with PPy increases the efficiency of charge separation and prolongs the electron lifetime. It is observed that the modified P3HT/PPy/TiO 2 solar cell shows the power conversion efficiency which is 77% higher than that of the P3HT/TiO 2 solar cell. These results prove that the in-situ photopolymerization is an efficient method to modify for the heterojunction solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · TiO2 Photocatalysis and Solar Cells · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Conjugated polymer-inorganic semiconductor hybrid solar cells10.1039/c0ee00632g ↗
2. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
3. Oxide/polymer interfaces for hybrid and organic solar cells: Anatase vs Rutile TiO210.1016/j.solmat.2010.12.028 ↗
4. Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer10.1002/adma.200306659 ↗
5. Polythiophene containing thermally removable solubilizing groups enhances the interface and the performance of polymer-titania hybrid solar cells10.1021/ja047452m ↗
6. Crafting semiconductor organic–inorganic nanocomposites via placing conjugated polymers in intimate contact with nanocrystals for hybrid solar cells10.1002/adma.201201196 ↗
7. P3HT/ZnS: a new hybrid bulk heterojunction photovoltaic system with very high open circuit voltage10.1016/j.solmat.2008.12.015 ↗
8. A simple nanostructured polymer/ZnO hybrid solar cell-preparation and operation in air10.1088/0957-4484/19/42/424013 ↗
9. Visible to near-infrared light harvesting in TiO2 nanotube array-P3HT based heterojunction solar cells10.1021/nl9024853 ↗
10. CuInS2-Poly(3-(ethyl-4-butanoate)thiophene) nanocomposite solar cells: preparation by an in situ formation route, performance and stability issues10.1016/j.solmat.2010.12.025 ↗
11. Improved hybrid solar cells via in situ UV polymerization10.1002/smll.200900093 ↗
12. Ordered bulk heterojunction solar cells with vertically aligned TiO2 nanorods embedded in a conjugated polymer10.1063/1.2937472 ↗
13. Towards efficient hybrid solar cells based on fully polymer infiltrated ZnO nanorod arrays10.1002/adma.201100414 ↗
14. Hierarchical TiO2 nanostructure array/P3HT hybrid solar cells with interfacial modification10.1021/jp304915x ↗
15. Hybrid polymer/zinc oxide photovoltaic devices with vertically oriented ZnO nanorods and an amphiphilic molecular interface layer10.1021/jp0571372 ↗
16. Highly efficient nanoporous TiO2-polythiophene hybrid solar cells based on interfacial modification using a metal-free organic dye10.1002/adma.200802388 ↗
17. Improving the performance of CdS/P3HT hybrid inverted solar cells by interfacial modification10.1016/j.solmat.2011.09.041 ↗
18. Enhanced light harvesting in mesoporous TiO2/P3HT hybrid solar cells using a porphyrin dye
19. Effects of molecular interface modification in CdS/polymer hybrid bulk heterojunction solar cells10.1016/j.solmat.2010.07.016 ↗
20. Effects of metal-free conjugated oligomer as a surface modifier in hybrid polymer/ZnO solar cells10.1016/j.solmat.2012.08.001 ↗
21. Employing an amphiphilic interfacial modifier to enhance the performance of a poly(3-hexylthiophene)/TiO2 hybrid solar cell10.1039/c0jm03615c ↗
22. A novel route to photoluminescent, water-soluble Mn-doped ZnS quantum dots via photopolymerization initiated by the quantum dots10.1088/0957-4484/19/48/485602 ↗
23. A novel photoconductive ZnO/PVK nanocomposite prepared through photopolymerization induced by semiconductor nanoparticles10.1016/j.matlet.2008.01.106 ↗
24. Photovoltaic hybrid films with polythiophene growing on monoclinic WO3 semiconductor substrates10.1021/la204990d ↗
25. Enhanced photoresponses of polypyrrole on surface modified TiO2 with self-assembled monolayers10.1016/j.jphotochem.2006.04.033 ↗
26. Growth of oriented single-crystalline rutile TiO2 nanorods on transparent conducting substrates for dye-sensitized solar cells10.1021/ja8078972 ↗
27. Binary polyethylene oxide/titania solid-state redox electrolyte for highly efficient nanocrystalline TiO2 photoelectrochemical cells10.1021/nl025798u ↗
28. Using upconversion nanoparticles to improve photovoltaic properties of poly(3-hexylthiophene)-TiO2 heterojunction solar cell10.1007/s11051-013-1547-z ↗
29. Polypyrrole-carbon nanotube composite films synthesized through gas-phase polymerization10.1016/j.synthmet.2010.01.028 ↗
30. Conducting polymer-coated thermally expandable microspheres10.1039/c0py00108b ↗
31. Identification of oxidized polypyrrole on Raman spectrum10.1016/S0379-6779(00)00188-0 ↗
32. XPS and FTIR surface characterization of TiO2 particles used in polymer encapsulation10.1021/la0015213 ↗
33. Hybrid solar cells based on nanoparticles of CuInS2 in organic matrices10.1002/adfm.200390024 ↗
34. Exciton diffusion and charge transfer dynamics in nano phase-separated P3HT/PCBM blend films10.1039/c0nr01002b ↗
35. Improved performance of polymer/TiO2 nanorod bulk heterojunction photovoltaic devices by interface modification10.1063/1.2839405 ↗
36. Simultaneous determination of carrier lifetime and electron density-of-states in P3HT:PCBM organic solar cells under illumination by impedance spectroscopy10.1016/j.solmat.2009.10.015 ↗
37. Hybrid photovoltaic devices based on poly(3-hexylthiophene) and ordered electrospun ZnO nanofibers10.1021/jp910921a ↗
38. Correlating interface heterostructure, charge recombination, and device efficiency of poly(3-hexyl thiophene)/TiO2 nanorod solar cell10.1021/la203533u ↗
39. Enhanced charge-collection efficiencies and light scattering in dye-sensitized solar cells using oriented TiO2 nanotubes arrays10.1021/nl062000o ↗
40. Enhanced performance of hybrid photovoltaic devices via surface-modifying metal oxides with conjugated polymer10.1016/j.solmat.2009.11.022 ↗
41. Photoresponsive polypyrrole-TiO2 nanoparticles films fabricated by a novel surface initiated polymerization10.1016/j.ssc.2008.02.022 ↗