journal article·2019-09Open access

Compatibility of vegetable oils with solid filler materials for thermocline thermal energy storage systems

J.-F. Hoffmann, T. Fasquelle, G. Vaitilingom, R. Olives, X. Py, V. Goetz

Abstract

Abstract Compatibility tests involving four vegetable oils and three different solid materials were performed, with a focus on rapeseed oil and quartzite rock. The objective was to verify the relevance of using vegetable oils as heat transfer fluid in concentrated solar power plants with direct thermocline thermal energy storage. First tests consisted in using small crucibles to put in contact rapeseed oil respectively with quartzite, blast furnace slags and alumina for 2160 h and at 210 °C. On a chemical point of view, the oil composition was modified by ageing and contact with solids. However, thermal properties that drive heat transfer (density, specific heat, thermal conductivity and dynamic viscosity) were not modified. Thermal stability temperature and flash point decreased and a correlation with the index of acidity of the samples has been found. Second set of tests consisted in putting in contact quartzite with rapeseed, palm, soybean and jatropha oils for 720 h and at 210 °C. Results confirmed that index of acidity can be a good indicator of the vegetable oil ageing. From the whole study, no incompatibility has been concluded, but one may recommend a limit value of 25 mg KOH.g−1 for the index of acidity to consider partial replacement of the vegetable heat transfer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Denholm · 2013
2. High temperature solar receiver and thermal storage systems10.1016/j.applthermaleng.2017.06.028 ↗
3. Concentrated solar power: current technologies, major innovative issues and applicability to West African countries10.1016/j.rser.2012.10.030 ↗
4. Natural and by-product materials for thermocline-based thermal energy storage system at CSP plant: structural and thermophysical properties10.1016/j.applthermaleng.2018.02.087 ↗
5. A review on experience feedback and numerical modeling of packed-bed thermal energy storage systems10.1016/j.solener.2017.03.032 ↗
6. Experimental and numerical investigation of potential filler materials for thermal oil thermocline storage10.1016/j.solener.2016.02.035 ↗
7. Development of a molten-salt thermocline thermal storage system for parabolic trough plants10.1115/1.1464123 ↗
8. A temperature threshold evaluation for thermocline thermal energy storage in concentrated solar power plants10.1016/j.apenergy.2017.12.105 ↗
9. Thermal stress numerical study in granular packed bed storage tank
10. Investigation of the long-term stability of quartzite and basalt for a potential use as filler materials for a molten-salt based thermocline storage concept10.1016/j.solener.2018.06.090 ↗
11. Temperature dependence of thermophysical and rheological properties of seven vegetable oils in view of their use as heat transfer fluids in concentrated solar plants10.1016/j.solmat.2017.12.037 ↗
12. A thermocline thermal energy storage system with filler materials for concentrated solar power plants: experimental data and numerical model sensitivity to different experimental tank scales10.1016/j.applthermaleng.2016.01.110 ↗
13. Experimental and numerical investigation of a thermocline thermal energy storage tank10.1016/j.applthermaleng.2016.12.053 ↗
14. Solutia
15. Heat transfer fluids for concentrating solar power systems - a review10.1016/j.apenergy.2015.01.125 ↗
16. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
17. Kruizenga · 2012
18. Brosseau · 2004
19. Compatibility of a post-industrial ceramic with nitrate molten salts for use as filler material in thermocline storage system10.1016/j.apenergy.2012.12.078 ↗
20. Compatibility tests between solar salt and thermal storage ceramics from inorganic industrial wastes10.1016/j.apenergy.2015.05.074 ↗
21. Molten Nitrate Salts at 600 and 680 °C: thermophysical property changes and corrosion of high-temperature nickel alloys10.1016/j.solener.2014.01.028 ↗
22. Bonk · 2016
23. Compatibility study between synthetic oil and vitrified wastes for direct thermal energy storage10.1007/s12649-016-9622-1 ↗
24. Material screening and compatibility for thermocline storage systems using thermal oil10.1016/j.applthermaleng.2018.09.094 ↗
25. Experimental results and modeling of energy storage and recovery in a packed bed of alumina particles10.1016/j.apenergy.2014.01.030 ↗
26. Particle-Particle heat transfer coefficient in a binary packed bed of alumina and zirconia-ceria particles10.1016/j.applthermaleng.2016.01.066 ↗
27. Waste from metallurgic industry: a sustainable high-temperature thermal energy storage material for concentrated solar power
28. Industrial waste produced in the UAE, Valuable high temperature materials for thermal energy storage applications10.1016/j.egypro.2015.07.320 ↗
29. Experimental validation of steel slag as thermal energy storage material in a 400 kWht prototype
30. Slag as an inventory material for heat storage in a concentrated solar tower power plant: experimental studies on design and performance of the thermal energy storage
31. Low-cost recycled material for thermal storage applied to solar power plants
32. Characterization of several Moroccan rocks used as filler material for thermal energy storage in CSP plants
33. Temperature dependence of thermal conductivity of vegetable oils for use in concentrated solar power plants, measured by 3omega hot wire method10.1016/j.ijthermalsci.2016.04.002 ↗
34. Vaitilingom · 2013
35. Ca(NO3)2-NaNO3-KNO3 molten salt mixtures for direct thermal energy storage systems in parabolic trough plants10.1115/1.4023182 ↗