Band-gap tuning of Cu2ZnSn(S,Se)4 solar cell absorbers via defined incorporation of sulphur based on a post-sulphurization process
Source abstract
Abstract
Abstract We demonstrate that based on a post-sulphurization approach the mean sulphur concentration and bandgap of Cu2ZnSn(S,Se)4 (CZTSSe) solar cell absorber layers can be precisely controlled. However, X-ray diffraction and secondary ion mass spectrometry studies reveal an inhomogeneous sulphur incorporation at lower process temperatures resulting in a sulphur gradient in the absorber. Optimization of such gradients may enable further performance improvement of future devices. During the post-sulphurization process sulphur seems to accumulate at the back of the absorber first where there is already an enrichment of sulphur in the purely selenized absorbers. With higher temperatures more sulphur gets incorporated and the sulphur distribution gets evened out. Morphology studies show that the process of exchanging the chalcogenides leaves behind holes and results in a porous absorber layer. With higher process temperatures and therefore higher sulphur content the absorber gets more dense. The device performance of the post-sulphurized samples increases significantly with increasing process temperature and increasing sulphur content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
2. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
3. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
4. Recent trends in direct solution coating of kesterite absorber layers in solar cells10.1016/j.solmat.2013.06.038 ↗
5. Bandgap engineering of Cu2ZnSn1−xGex S(e)4 by adjusting Sn-Ge ratios for almost full solar spectrum absorption10.1016/j.jallcom.2017.05.150 ↗
6. Germanium Alloyed Kesterite Solar Cells with Low Voltage Deficits10.1021/acs.chemmater.5b04806 ↗
7. Hydrazine-Processed Ge-Substituted CZTSe Solar Cells10.1021/cm302881g ↗
8. Earth Abundant Element Cu2Zn(Sn1-xGex)S4 Nanocrystals for Tunable Band Gap Solar Cells: 6.8% Efficient Device Fabrication10.1021/cm2002836 ↗
9. Cu2ZnGexSn1-xQ4 (Q=S,Se) Films for Solar Cell10.1021/jp510877g ↗
10. Electronic and optical properties of Cu2ZnSnS4 and Cu2ZnSnSe410.1063/1.3318468 ↗
11. Sulfur-containing Cu2ZnSnSe4 monograin powders for solar cells10.1016/j.solmat.2010.06.046 ↗
12. Cu2ZnSn(S1-xSex)4 based solar cell produced by selenization of vacuum deposited precursors10.1016/j.solmat.2012.02.016 ↗
13. Growth and characterization of Cu2ZnSn(S,Se)4 thin films for solar cells10.1016/j.solmat.2012.02.031 ↗
14. Single-Step Sulfo-Selenization Method to Synthesize Cu2ZnSn(SySe1y)4 Absorbers from Metallic Stack Precursors10.1002/cphc.201300157 ↗
15. Formation and impact of secondary phases in Cu-poor Zn-rich Cu2ZnSn(S1-ySey)4 (0 ≤ y ≤ 1) based solar cells10.1016/j.solmat.2015.04.023 ↗
16. Efficiency enhancement by adding SnS powder during selenization for Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.solmat.2015.10.037 ↗
17. Detailed Balance Limit of Efficiency of p-n Junction Solar Cells10.1063/1.1736034 ↗
18. Device Characteristics of CZTSSe Thin-Film Solar Cells with 12.6% Efficiency10.1002/aenm.201301465 ↗
19. Perovskite-kesterite monolithic tandem solar cells with high open-circuit voltage10.1063/1.4899275 ↗
20. Device and material characterization of Cu(InGa)Se2 solar cells with increasing band gap10.1063/1.361431 ↗
21. A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
22. Back surface band gap gradings in Cu(In,Ga)Se2 solar cells10.1016/S0040-6090(00)01726-0 ↗
23. Band-gap grading in Cu(In,Ga)Se2 solar cells10.1016/j.jpcs.2005.09.087 ↗
24. Band-gap-graded Cu2ZnSn(S1-x,Sex)4 Solar Cells Fabricated by an Ethanol-based
25. Bandgap-Graded Cu2Zn(Sn1-xGex)S4 Thin-Film Solar Cells Derived from Metal Chalcogenide Complex Ligand Capped Nanocrystals10.1021/cm501568d ↗
26. A band-gap-graded CZTSSe solar cell with 12.3% efficiency10.1039/C6TA01558A ↗
27. M. Neuwirth, E. Seydel, H. Kalt, M. Hetterich, Band-Gap Engineering in Cu2ZnSn(S,Se)4 Solar Cells by Post-Sulphurization of Selenized Absorber Layers, in: Photovoltaic Specialist Conference (PCSV), 2017 IEEE 44th, IEEE, Washington, to be published.10.1109/PVSC.2017.8366100 ↗
28. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S,Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
29. A multiple-selenization process for enhanced reproducibility of Cu2ZnSn(S,Se)4 solar cells10.1063/1.4971362 ↗
30. Modified methods for the calculation of real Schottky-diode parameters10.1007/BF00348239 ↗
31. Compositional dependence of structural and electronic properties of Cu2ZnSn(S,Se)4 alloys for thin film solar cells10.1103/PhysRevB.83.125201 ↗
32. C. Frisk, C. Platzer-Bjrkman, V. Fjllstrm, O. Salmone, J. Olsson, M. Edoff, Modeling Ga-profiles for Cu(In,Ga)Se2 thin film solar cells with varying defect density, in: 23rd International Photovoltaic Science and Engineering Conference; Taipei, Taiwan; October 28 - Nov 1 (2013): Proceedings.
33. Optimizing Ga-profiles for highly efficient Cu(In, Ga)Se2 thin film solar cells in simple and complex defect models10.1088/0022-3727/47/48/485104 ↗
34. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
35. High efficiency graded bandgap thin-film polycrystalline Cu(In,Ga)Se2-based solar cells10.1016/0927-0248(95)00145-X ↗
36. A better understanding of the reaction pathways in the formation of Cu2ZnSn(Sx,Se1-x)4 thin films10.1016/j.solmat.2017.07.031 ↗
37. Diffuse electroreflectance of thin-film solar cells: Suppression of interference-related lineshape distortions10.1063/1.4936649 ↗
38. Reversible order-disorder related band gap changes in Cu2ZnSn(S,Se)4 via post-annealing of solar cells measured by electroreflectance10.1063/1.4905351 ↗
39. Morphology of multiple-selenized Cu2ZnSn(S,Se)4 absorber layers, Phys10.1002/pssc.201600163 ↗
40. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
41. Cu2ZnSnS4 thin film solar cells from electroplated precursors: Novel low-cost perspective10.1016/j.tsf.2008.11.061 ↗