journal article·2018-01

Impact of contact integrity during thermal stress testing on degradation analysis of copper-plated silicon solar cells

Jack Colwell, Pei-Chieh Hsiao, Xiaowei Shen, Wei Zhang, Xi Wang, Sean Lim, Alison Lennon

Publisher page

Abstract

Abstract In this study, silicon solar cells with copper-plated front side metallisation were exposed to long-term reliability thermal stress conditions and the material integrity of the plated contacts after stress testing was investigated using imaging and electrical measurements. Significant voltage ‘bend-back’ was observed in Suns- V OC measurements at high illumination intensities (> 1 Sun) following thermal stress testing at 200 °C for 500 h of laser-ablated cells with a nickel/copper/silver plated front metal grid. Using a combination of focussed ion beam milling, high resolution imaging and energy dispersive X-ray spectroscopy, it was shown that large voids can form between the silver capping layer and the main copper stack during thermal annealing. However, even more revealing was the detection of a new metal layer comprising largely of diffused copper overlying the silver capping. The cause of the Schottky ‘bend-back’ behaviour was theorised to be due to increased contact resistance arising from the voids which are presumed to form as a result of grain boundary diffusion of copper through the silver capping layer. Errors of 5–10% in the determination of pFF from Suns- V OC occur as a result, with the scale of the error dependent on the capping method and sintering conditions. Collapsing the voids was subsequently shown to remove the Schottky behaviour and improve reliability of the fitted diode parameters extracted from Suns- V OC measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Summary of the 6th workshop on metallization and interconnection for crystalline silicon solar cells10.1016/j.egypro.2016.10.089 ↗
2. The future of metallization and interconnection – forecast of experts of the 6th metallization workshop10.1016/j.egypro.2016.10.090 ↗
3. A. Lennon, et al. Addressing perceived barriers to the adoption of plated metallisation for silicon photovoltaic manufacturing, in: Proceedings of the 52nd Annual Conference, Australian Solar Energy Society, 2014.
4. Recombination activity of copper in silicon10.1063/1.1415350 ↗
5. Electrical and recombination properties of copper‐silicide precipitates in silicon10.1149/1.1838889 ↗
6. Electrical properties and recombination activity of copper, nickel and cobalt in silicon10.1007/s003390050649 ↗
7. Frant · 1962
8. Qualitative observations on the diffusion of copper and gold through a nickel barrier10.1007/BF03186793 ↗
9. Metallic diffusion barriers for the copper- electrodeposited gold system
10. Electrolessly deposited diffusion barriers for microelectronics10.1147/rd.425.0607 ↗
11. Impact of localized regions with very high series resistances on cell performance10.1002/pip.1163 ↗
12. Quick determination of copper-metallization long-term impact on silicon solar cells10.1149/1.3466984 ↗
13. A. Mondon, et al. Advanced front side metallization for crystalline silicon solar cells based on a nickel-silicon contact, in: Proceedings of the 2nd Workshop on Metallization of Crystalline Silicon Solar Cells, 2010.
14. Long term stability of copper front side contacts for crystalline silicon solar cells10.1016/j.solmat.2014.12.024 ↗
15. Passivated busbars from screen-printed low-temperature copper paste10.1016/j.egypro.2014.08.052 ↗
16. R. Labie, J.L.H.J. Govaerts, C. Allebe, L. Tous, A.U.De. Castro, R. Russel, I. Gordon, K. Baert, Cu plated I-Perl cells: aging and humidity reliabiliy tests, in: Proceedings of the 26th European Photovoltaic Energy Conference, Leuven, Belgium, 2012.
17. R. Sinton, A. Cuevas. A Quasi-Steady-State Open-Circuit Voltage Method for Solar Cell Characterization.
18. Copper penetration in laser-doped selective-emitter silicon solar cells with plated nickel barrier layers10.1016/j.solmat.2014.07.026 ↗
19. Formation and properties of copper silicide precipitates in silicon10.1002/(SICI)1521-396X(199803)166:1<171::AID-PSSA171>3.0.CO;2-2 ↗
20. Physics of copper in silicon10.1149/1.1421348 ↗
21. Characterization of 23-percent efficient silicon solar cells10.1109/16.46361 ↗
22. S. Glunz, et al., Analyzing back contacts of silicon solar cells by suns-V oc measurements at high illumination densities, in: Presented at Proceedings of the 22nd European Photovoltaic Solar Energy Conference and Exhibition, 2007.
23. Laser-doped metal-plated bifacial silicon solar cells10.1016/j.solmat.2014.06.020 ↗
24. Qualitative observations on the diffusion of copper and gold through a nickel barrier10.1007/BF03186793 ↗
25. Mass diffusion in polycrystalline copper/electroplated gold planar couples10.1007/BF02642589 ↗
26. Low‐temperature diffusion of copper through gold10.1063/1.323265 ↗
27. Diffusion barrier properties of electroless Ni for electroless Cu using Cu plating employing hypophosphite as a reducing agent
28. Effect of W addition on the electroless deposited NiP (W) barrier layer10.1016/j.apsusc.2013.06.023 ↗
29. A. Istratov, E. Weber, The importance of understanding of the physics of copper in silicon for development and characterization of copper diffusion barriers. Copper interconnects, new contact metallurgies/structures, and low-K interlevel dielectrics, 2001, p. 90.
30. Electroless nickel deposition and silicide formation for advanced front side metallization of industrial silicon solar cells10.1016/j.egypro.2012.05.006 ↗
31. Effect of plating current density and annealing on impurities in electroplated Cu film10.1116/1.1931679 ↗
32. Grain-boundary diffusion: an historical perspective10.1039/ft9908601307 ↗
33. The analysis of grain boundary diffusion measurements10.1088/0508-3443/14/6/317 ↗
34. Grain boundary diffusion in metals: recent developments10.2320/matertrans.44.14 ↗
35. Copper microstructure evolution in light-induced plated metal grids for silicon solar cells: implications for reliable metallization10.1149/2.0441614jes ↗
36. Kirkendall voids in the intermetallic layers of solder joints in MEMS10.1016/j.commatsci.2008.09.028 ↗
37. Distribution of silicon in the aluminum matrix for rear passivated solar cells10.1016/j.egypro.2011.06.145 ↗
38. J. Cui, et al., Localised back surface field formation via different dielectric patterning approaches, in: Proceedings of the 50th Annual Australian Solar Council’s Conference. Swinburne University of Technology, Melbourne, 2012.
39. Grain structure analysis and effect on electromigration reliability in nanoscale Cu interconnects10.1063/1.4799484 ↗
40. Preparation, characteristics and photovoltaic properties of cuprous oxide—a review10.1016/0038-1101(86)90191-7 ↗
41. N. Nampalli, et al., Outdoor testing of field-aged BP saturn modules with nickel-copper plated contacts, in Proceedings of the 6th World Conference on Photovoltaic Energy Conversion, Kyoto, 2014.