journal article·2011-08

Performance of electron beam deposited tungsten doped indium oxide films as anodes in organic solar cells

Ziyang Hu, Jianjun Zhang, Xinliang Chen, Shirong Ren, Zhihong Hao, Xinhua Geng, Ying Zhao

Publisher page

Abstract

Abstract Tungsten doped indium oxide (IWO) thin films have been investigated as an alternative to indium tin oxide (ITO) anodes in organic solar cells (OSCs). The surface morphology, electrical, and optical properties of the IWO films grown by electron beam deposition were studied as a function of oxygen flow rate. For 120 nm thick IWO films deposited on float glass substrates at 350 °C and oxygen flow rate of 35 sccm, an electrical resistivity of 4.78×10 −4 Ω cm and average transmittance of over 78% between 400 and 2000 nm were obtained. OSCs based on poly(3-hexylthiophene) and [6,6]-phenyl C 61 -butlyric acid methyl ester were prepared on glass/IWO electrodes and the device performance was investigated as a function of IWO films with different oxygen flow rates. OSCs fabricated on the optimum IWO anode (oxygen flow rate of 30–35 sccm) exhibited a power conversion efficiency of ∼3.5%, which is comparable with the same device made on commercial glass/ITO electrodes (3.75%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
2. Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating10.1021/am100505e ↗
3. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
4. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6) C61 blends10.1063/1.2006986 ↗
5. 4.2% efficient organic photovoltaic cells with low series resistances10.1063/1.1713036 ↗
6. Thermally stable, efficient polymer solar cell with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
7. Investigation of low resistance transparent MoO3/Ag/MoO3 multilayer and application as anode in organic solar cells10.1016/j.tsf.2009.12.031 ↗
8. Highly conductive bilayer transparent conducting oxide thin films for large-area organic photovoltaic cells10.1021/cm902265n ↗
9. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
10. Solar spectral optical properties of pigments—part Ι: model for deriving scattering and absorption coefficients from transmittance and reflectance measurements10.1016/j.solmat.2004.11.012 ↗
11. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
12. Organic tandem solar cells with complementary absorbing layers and a high open-circuit voltage10.1063/1.3464169 ↗
13. Highly efficient tandem polymer photovoltaic cells10.1002/adma.200901624 ↗
14. Optimizing polymer tandem solar cells10.1002/adma.200902398 ↗
15. A new light trapping TCO for nc-Si:H solar cells10.1016/j.solmat.2005.09.018 ↗
16. High near-infrared transparent molybdenum-doped indium oxide thin films for nanocrystalline silicon solar cell applications10.1016/j.solmat.2008.08.007 ↗
17. High-mobility transparent conducting Mo-doped In2O3 thin films by pulsed laser deposition10.1063/1.1646468 ↗
18. Titanium-doped indium oxide: a high-mobility transparent conductor10.1063/1.1995957 ↗
19. High-mobility transparent conductive Zr-doped In2O310.1063/1.2337281 ↗
20. Transparent and semitransparent conducting film deposition by reactive-environment, hollow cathode sputtering10.1116/1.1894423 ↗
21. Application of high mobility transparent conductors to enhance long wavelength transparency of the intermediate solar cell in multi-junction solar cells10.1016/j.tsf.2008.11.007 ↗
22. Transparent conductive oxide thin films of tungsten-doped indium oxide10.1016/j.tsf.2006.07.014 ↗
23. Development of novel tungsten-doped high mobility transparent conductive In2O3 thin films10.1116/1.2333572 ↗
24. Tungsten-doped In2O3 transparent conductive films with high transmittance in near-infrared region10.1016/j.jcrysgro.2008.05.012 ↗
25. Characterization of transparent conducting oxides10.1557/mrs2000.152 ↗
26. Surface roughness effects and their influence on the degradation of organic light emitting devices10.1023/A:1004842004640 ↗
27. Very-high-efficiency double-heterostructure copper phthalocyanine/C60 photovoltaic cells10.1063/1.1432440 ↗
28. Organic solar cells using transparent SnO2-F anodes10.1002/adma.200600797 ↗