Effective optimization of indium tin oxide films by a statistical approach for shallow emitter based crystalline silicon solar cell applications
Source abstract
Abstract
Abstract In this study, we propose a statistical approach based on Taguchi method and Grey relational analysis for effective optimization of indium tin oxide (ITO) films which are used as front contact for shallow emitter based crystalline silicon (c-Si) solar cells. The experiments were designed by the Taguchi method through an orthogonal array, resulting in the reduction of the number of experiments by approximately 90%; the reproduction effect of process parameters on performance characteristics, however, is still ensured. Excellent compromise between electrical and optical properties of ITO films was obtained by Grey relational analysis at power density of 0.685 W/cm 2 , working pressure of 0.4 Pa, substrate temperature of 250 °C, and post-annealing temperature of 300 °C in 30 min. The ITO films exhibited lowest electrical resistivity of 1.316×10 −4 Ω cm, and highest transmittance of 91.251% under optimal condition. The shallow emitter based c-Si solar cells using the optimal ITO films showed highest efficiency of 17.555%, yielding a 1.375% absolute increase in efficiency compared to using ITO films with initial condition. Furthermore, using analysis of variance, we found that the substrate temperature was a key parameter which critically affected the opto-electrical properties of ITO films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Advances in crystalline silicon solar cell technology for industrial mass production10.1038/asiamat.2010.82 ↗
2. Silicon nanowires for photovoltaic solar energy conversion10.1002/adma.201002410 ↗
3. Selective emitter formation process using single screen-printed phosphorus diffusion source10.1016/j.solmat.2012.11.013 ↗
4. Experimental study on the elimination of over-plating problems in industrial manufacturing of large-area acidic-textured laser-doped multi-crystalline solar cells10.1016/j.solmat.2012.08.019 ↗
5. Emitter controlled SiNx-free crystalline Si solar cells with a transparent conducting oxide film10.1016/j.matlet.2012.04.028 ↗
6. Screen printed phosphorus diffusion for low-cost and simplified industrial mono-crystalline silicon solar cells10.1016/j.solmat.2010.04.055 ↗
7. Study on hydrogenated silicon nitride for application of high efficiency crystalline silicon solar cells10.1016/j.solmat.2010.03.031 ↗
8. Firing stability of SiNy/SiNx stacks for the surface passivation of crystalline silicon solar cells10.1016/j.solmat.2011.09.051 ↗
9. Effective light management of three-dimensionally patterned transparent conductive oxide layers
10. rf-Magnetron sputtered ITO thin films for improved heterojunction solar cell applications10.1016/j.cap.2010.02.019 ↗
11. Effects of deposition parameters on the electrical and mechanical properties of indium tin oxide films on polyethylene napthalate substrates deposited by radio frequency magnetron sputtering10.1016/j.tsf.2007.12.146 ↗
12. Structure, optical, and electrical properties of indium tin oxide thin films prepared by sputtering at room temperature and annealed in air or nitrogen10.1063/1.2715539 ↗
13. Effect of film thickness on the properties of indium tin oxide thin films10.1063/1.1318368 ↗
14. Effects of target bias voltage on indium tin oxide films deposited by high target utilisation sputtering10.1016/j.tsf.2007.03.124 ↗
15. Castor oil transesterification reaction: a kinetic study and optimization of parameters10.1016/j.energy.2010.06.034 ↗
16. Combustion characteristics and optimal factors determination with Taguchi method for diesel engines port-injecting hydrogen10.1016/j.energy.2012.09.027 ↗
17. Energetic and exergetic efficiencies of coal-fired CHP (combined heat and power) plants used in district heating systems of China10.1016/j.energy.2013.05.055 ↗
18. Taguchi · 1989
19. Phadke · 1995
20. Introduction to gray system theory
21. Optimizing multiple quality characteristics via taguchi method-based gray analysis10.1016/j.jmatprotec.2006.07.015 ↗
22. Microstructure of low-resistivity tin-doped indium oxide films deposited at 150–200°C10.1143/JJAP.34.L244 ↗
23. Effects of substrate temperature on electrical and optical properties ITO films deposited by rf magnetron sputtering10.1007/s10832-008-9539-6 ↗
24. Properties of ITO thin films deposited by RF magnetron sputtering at elevated substrate temperature10.1016/S0921-5107(00)00477-3 ↗
25. Effects of tin concentrations on structural characteristics and electrooptical properties of tin-doped indium oxide films prepared by RF magnetron sputtering10.1143/JJAP.34.600 ↗
26. Studies on the preferred orientation changes and its influenced properties on ITO thin films10.1016/S0042-207X(96)00309-0 ↗
27. Post-deposition annealing effects in RF reactive magnetron sputtered indium tin oxide thin films10.1016/0927-0248(92)90050-Y ↗
28. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
29. Schroder · 2006
30. Influence of the front contact barrier height on the Indium Tin Oxide/hydrogenated p-doped amorphous silicon heterojunction solar cells10.1016/j.tsf.2008.02.031 ↗