Thin-film solar cells on commercial ceramic tiles
Source abstract
Abstract
Abstract Amorphous silicon solar cells were deposited on porcelain stoneware tiles in order to develop a fully integrated PV building element. In a previous work we demonstrated the feasibility of adopting porcelain stoneware tiles as thin-film solar cell substrates and we fabricated 1 × 1 cm 2 solar cells on “industrial-level” ceramic substrates showing more than 4% efficiency. In this study we focus our attention on larger area ( 7 cm 2 ) devices deposited on 100 cm 2 tiles. As the active area increases additional problems arise from the surface of the substrate. In particular we find that short-circuit paths originate from the unfavorable properties of the substrate tiles (roughness, porosity, etc.) having dramatic consequences on the performance of larger area devices. With the assumption that spot-like regions, in which the back layer and the front layer are in electrical contact (local short-circuits), are present all over the device, we propose a new device structure to overcome the substrate drawbacks. A new contacts arrangement was designed in order to minimize the shunting effect of short-circuit paths. As a result an initial efficiency of 2.5% has been obtained using the new device structure for 7 cm 2 devices deposited on a 100 cm 2 PV mini-module tile.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · ZnO doping and properties · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. D. Iencinella, E. Centurioni, A. Salomoni, B. Mazzanti, M.G. Busana, A. Fregni, S. Fazio, Solar cells on porcelain stoneware tiles, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, 2006, pp. 1697–1699.
2. G. Timellini, C. Palmonari, Ceramic tile in urban design, Edi.Cer. Sassuolo, Italy, 2004.
3. Thin-film polycrystalline silicon solar cells on ceramic substrates with a Voc above 500mV10.1016/j.tsf.2005.12.069 ↗
4. Thin-film silicon solar cells on mullite substrates10.1016/j.solmat.2005.10.018 ↗
5. Influence of the sputtering system's vacuum level on the properties of indium tin oxide films10.1016/j.tsf.2005.10.068 ↗
6. Optimization of ITO layers for applications in a-Si/c-Si heterojunction solar cells10.1016/S0040-6090(02)01143-4 ↗