journal article·2021-04

Inkjet printing of phosphorus dopant sources for doping poly-silicon in solar cells with passivating contacts

Zohreh Kiaee, Christian Reichel, Zulkifl Hussain, Milad Nazarzadeh, Jonas D. Huyeng, Florian Clement, Martin Hermle, Roman Keding

Publisher page

Abstract

Abstract In this work application of inkjet printing of phosphorus inks as dopant source for fabrication of silicon solar cells with tunnel oxide passivating contacts (TOPCon) was demonstrated. Inkjet printing is of great importance for the formation of selectively doped TOPCon layers of industrial TOPCon cells to provide a low contact resistance, while creating the requirements for screen printing metallization. Rheological characterizations were carried out in order to determine the complex viscosity and elastic effects of the inks. Printing processes were developed and optimized accordingly, given the significant relevance of rheology in inkjet printing. It was realized that inkjet printing processes have a direct influence on the electrical properties of passivating contacts. Droplets with a diameter of below 35 μm and lines with sharp edges and width of down to 70 μm were obtained. Excellent passivation quality was achieved for inkjet-printed n-type poly-Si surfaces with an implied open-circuit voltage of iVoc = 733 mV and an implied fill factor of iFF = 86.4%. For n-type passivating contacts, doped by inks containing phosphorus, the junction characteristics were investigated using double-sided contacted silicon solar cells. With these cells, Voc = 703 mV, FF = 72 %, and conversion efficiency of η = 17.1 % were realized. For ion-implanted poly-Si surfaces, herein used as reference, η = 18.2 % was obtained, underlining the high potential of investigated inkjet printing processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Feldmann · 2013 · 988
2. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
3. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
4. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
5. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
6. Feldmann · 2019 · 304
7. 23% efficient p-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
8. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
9. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
10. Large area tunnel oxide passivated rear contact n -type Si solar cells with 21.2% efficiency10.1002/pip.2739 ↗
11. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
12. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
13. Large area tunnel oxide passivated rear contact n -type Si solar cells with 21.2% efficiency10.1002/pip.2739 ↗
14. D. Chen, Y. Chen, Z. Wang, J. Gong, C. Liu, Y. Zou, Y. He, Y. Wang, L. Yuan, W. Lin, R. Xia, L. Yin, X. Zhang, G. Xu, Y. Yang, H. Shen, Z. Feng, P.P. Altermatt, J.P. Verlinden, 24.58% Total Area Efficiency of Screen-Printed, Large Area Industrial Silicon Solar Cells with the Tunnel Oxide Passivated Contacts (I-TOPCon) Design, Solar Energy Materials and Solar Cells 206 110258.10.1016/j.solmat.2019.110258 ↗
15. Development of thin polysilicon layers for application in monoPoly™ cells with screen-printed and fired metallization10.1016/j.solmat.2019.110358 ↗
16. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
17. Silicon-rich silicon carbide hole-selective rear contacts for crystalline-silicon-based solar cells10.1021/acsami.6b12714 ↗
18. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells
19. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
20. Richter · 2020
21. High-efficiency heterojunction crystalline Si solar cells10.7567/JJAP.57.08RB20 ↗
22. R. Low, A. Gupta, N. Bateman, D. Ramappa, P. Sullivan, W. Skinner, J. Mullin, S. Peters, H. Weiss-Wallrath, High efficiency selective emitter enabled through patterned ion implantation, in: 2010 35th IEEE Photovoltaic Specialists Conference, Honolulu, HI, USA, IEEE, 6/20/2010 - 6/25/2010, pp. 1440–1445.10.1109/PVSC.2010.5614426 ↗
23. High efficiency selective emitter cells using patterned ion implantation10.1016/j.egypro.2011.06.205 ↗
24. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
25. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
26. Dahlinger · 2015
27. Weber · 2018
28. T. Roder, P. Grabitz, S. Eisele, C. Wagner, J.R. Kohler, J.H. Werner, 0.4% absolute efficiency gain of industrial solar cells by laser doped selective emitter, in: 2009 34th IEEE Photovoltaic Specialists Conference (PVSC), Philadelphia, PA, IEEE, 6/7/2009 - 6/12/2009, pp. 871–873.10.1109/PVSC.2009.5411149 ↗
29. 22.0% efficient laser doped back contact solar cells10.1016/j.egypro.2013.07.274 ↗
30. Black silicon laser-doped selective emitter solar cell with 18.1% efficiency10.1016/j.solmat.2015.10.018 ↗
31. Efficiency potential of P-type Al 2 O 3 /SiN passivated PERC solar cells with locally laser-doped rear contacts10.1109/JPHOTOV.2016.2535353 ↗
32. Development and characterization of AlOx/SiNx :B layer systems for surface passivation and local laser doping10.1109/JPHOTOV.2017.2719278 ↗
33. Laser-doping of crystalline silicon substrates using doped silicon nanoparticles10.1016/j.tsf.2013.09.056 ↗
34. D. Neumayer, K. Saenger, Laser Doping of Crystalline Semiconductors Using a Dopant-Containing Amorphous Silicon Stack for Dopant Source and Passivation, Patent US20120225515.
35. Towards all screen printed back-contact back-junction silicon solar cells
36. Huyeng · 2018
37. Kiaee · 2018
38. Kiaee · 2019
39. Inkjet-printed diffusion sources
40. Printable liquid silicon for local doping of solar cells10.1016/j.solmat.2017.11.003 ↗
41. High-efficiency n-type Si solar cells with novel inkjet-printed boron emitters10.1109/LED.2012.2191263 ↗
42. Co-diffused back-contact back-junction silicon solar cells without gap regions10.1109/JPHOTOV.2013.2274382 ↗
43. Inkjet technology for crystalline silicon photovoltaics10.1002/adma.201403631 ↗
44. Links between ink rheology, drop-on-demand jet formation, and printability
45. The rheological characterization of linear viscoelasticity for ink jet fluids using piezo axial vibrator and torsion resonator rheometers10.1122/1.3439696 ↗
46. Inkjet printing-process and its applications10.1002/adma.200901141 ↗
47. Characterization of the viscoelastic behavior of complex fluids using the piezoelastic axial vibrator10.1122/1.1917843 ↗
48. Contactless determination of current-voltage characteristics and minority-carrier lifetime for quasi-steady-state photconductance data10.1063/1.117723 ↗
49. Carrier-selective contacts for Si solar cells10.1063/1.4875904 ↗
50. The role of elasticity in the formation of electrospun fibers10.1016/j.polymer.2006.04.050 ↗
51. Dynamics of liquid droplets in an evaporating drop: liquid droplet “coffee stain” effect10.1039/c2ra20743e ↗
52. McIntosh · 2010 · 2188
53. Analysis and optimization approach for the doped amorphous layers of silicon heterojunction solar cells10.1063/1.3650255 ↗
54. Fill factor limitation of silicon heterojunction solar cells by junction recombination
55. Bowden · 2001 · 1802
56. Glunz · 2007 · 849
57. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗