journal article·2021-01

NiCrAlO/Al2O3 solar selective coating prepared by direct current magnetron sputtering and water boiling

Yuping Ning, Jian Wang, Changzheng Sun, Zhibiao Hao, Bing Xiong, Lai Wang, Yanjun Han, Hongtao Li, Yi Luo

Publisher page

Abstract

Abstract NiCrAlO/Al2O3 solar selective coating prepared by direct current (DC) magnetron sputtering and water boiling is demonstrated in this paper. Firstly, the coating consisting of tandem layers of Au/NiCrAl/Al with different NiCr volume fractions in NiCrAl sublayers is deposited solely by DC magnetron sputtering. Then the coating is boiled by deionized water and dehydrated by vacuum heating. The surface morphology, the depth distributions and relative chemical states of elements of the coating are characterized by scanning electron microscopy (SEM), Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS). It is found that Al in the coating is totally oxidized while most of NiCr and Au keep metallic after water boiling and vacuum dehydration, which forms the effective solar selective coating consisting of Au/NiCrAlO/Al2O3 with different metallic NiCr volume fractions. High near normal solar absorptance of 0.964 and low near normal thermal emittance of 0.066 are demonstrated by the reflectance measured by UV-VIS-IR spectrometer. The combination of DC magnetron sputtering and water boiling is very promising for fabrication of solar selective coating based on the dielectric aluminum oxide, as it is environmentally friendly and circumvents the radio frequency (RF) magnetron sputtering which needs RF automatic matching.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Optical parameters of a novel competitive selective absorber for low temperature solar thermal applications10.1016/j.solmat.2018.01.031 ↗
2. The potential applications and advantages of powering solar air-conditioning systems using concentrator augmented solar collectors10.1016/j.apenergy.2011.07.050 ↗
3. Structure and optical properties of Ag-Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
4. Review of physical vapor deposited (PVD) spectrally selective coatings for mid-and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
5. Transition metal based CuxNiyCoz-x-yO4 spinel composite solar selective absorber coatings for concentrated solar thermal applications10.1016/j.solmat.2018.09.033 ↗
6. Optical property and thermal stability of Mo/Mo-SiO2/SiO2 solar-selective coating prepared by magnetron sputtering10.1002/pssa.201026301 ↗
7. Optimization and preparation of Pt-Al2O3 double cermet as selective solar absorber coatings10.1016/j.jallcom.2015.12.201 ↗
8. Solar selective absorbers based on Al2O3:W cermets and AlSiN/AlSiON layers10.1016/j.solmat.2015.01.029 ↗
9. Aqueous solution-chemical derived Ni-Al2O3 solar selective absorbing coatings10.1016/j.solmat.2012.05.030 ↗
10. Enhanced thermal stability of W‐Ni‐Al2O3 cermet‐based spectrally selective solar absorbers with tungsten infrared reflectors10.1002/aenm.201401042 ↗
11. Thermal stability of multilayered Pt-Al2O3 nanocoatings for high temperature CSP systems10.1016/j.vacuum.2015.02.001 ↗
12. Structure, optical properties and thermal stability of Al2O3-WC nanocomposite ceramic spectrally selective solar absorbers10.1016/j.optmat.2016.05.037 ↗
13. Structural and optical properties of aluminum nitride thin films deposited by pulsed dc magnetron sputtering
14. Comparison in formation, optical properties and applicability of DC magnetron and RF sputtered aluminum oxide films10.1016/j.vacuum.2016.03.033 ↗
15. High rate deposition of thin film CdTe solar cells by pulsed dc magnetron sputtering10.1557/adv.2016.45 ↗
16. High-performance solution-processed plasmonic Ni nanochain-Al2O3 selective solar thermal absorbers10.1063/1.4766730 ↗
17. Optical properties and thermal stability of solar selective absorbers based on Co-Al2O3 cermets10.1016/j.cjph.2017.02.015 ↗
18. Antireflective coating using aluminum hydroxide formed by hydrothermal treatment of sputtered aluminum films10.1063/1.3181057 ↗
19. Formation of anti-reflection coating by hydrothermal treatment of aluminum films and their stabilization by dehydration10.2320/matertrans.M2013026 ↗
20. NiCr-MgF2 spectrally selective solar absorber with ultra-high solar absorptance and low thermal emittance10.1016/j.solmat.2019.110219 ↗
21. Zhao · 2007 · 1651
22. Highly corrosion resistant and sandwich-like Si3N4/Cr-CrNx/Si3N4 coatings used for solar selective absorbing applications10.1021/acsami.6b11607 ↗
23. Wagner · 1979