journal article·2019-06

Rear point contact structures for performance enhancement of semi-transparent ultrathin Cu(In,Ga)Se2 solar cells

Guanchao Yin, Ming Song, Martina Schmid

Publisher page

Abstract

Abstract Semi-transparent ultrathin Cu(In,Ga)Se2 (CIGSe) solar cells offer many promising applications but their efficiencies are still limited. In this work, SiO2 point contact structures were prepared using nanosphere lithography on Sn:In2O3 (ITO) substrate and ultrathin CIGSe solar cells were fabricated on top. It was discovered that the SiO2 point contact structure at the CIGSe/ITO interface behaves significantly different from at the CIGSe/Mo interface and does not improve the rear interface reflectivity or short-circuit current density. However, the SiO2 point contact structure brings pronounced electrical benefits, arising from the joint effect of reduced back recombination and induced field effect by internal charges. Semi-transparent ultrathin CIGSe solar cells with an absorber thickness of 380 nm exhibited a significant increase in open circuit voltage of 26 mV and fill factor of 9.4% (absolute). Consequently, the efficiency is improved by 23% (from absolute 6.8%–8.4%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. 2016
3. Addressing the terawatt challenge: scalability in the supply of chemical elements for renewable energy
4. Natural resource limitations to terawatt-scale solar cells10.1016/j.solmat.2011.06.013 ↗
5. Enhanced performance of ultra-thin Cu(In,Ga)Se2 solar cells deposited at low process temperature10.1016/j.solmat.2014.08.045 ↗
6. Novel device structure for Cu(In,Ga)Se2 thin film solar cells using transparent conducting oxide back and front contacts10.1016/j.solener.2004.08.010 ↗
7. Cu(In,Ga)Se2 superstrate solar cells : prospects and limitations10.1002/pip.2536 ↗
8. Optoelectronic enhancement of ultrathin CuIn1–xGaxSe2 solar cells by Nanophotonic contacts10.1002/adom.201600637 ↗
9. Losses in CuInSe2-based thin film Monolithic tandem solar cells
10. Experimental verification of optically optimized CuGaSe2 top cell for improving chalcopyrite tandems
11. Formation of transparent and ohmic ZnO:Al/MoSe2 contacts for bifacial Cu(In,Ga)Se2 solar cells and tandem structures10.1016/j.tsf.2004.11.001 ↗
12. Backwall superstrate configuration for ultrathin Cu(In,Ga)Se2 solar cells10.1063/1.4862651 ↗
13. Improved performance of ultrathin Cu(in,Ga)Se2 solar cells with a backwall superstrate configuration10.1109/JPHOTOV.2014.2345436 ↗
14. Passivation of interfaces in thin film solar Cells : Understanding the effects of a nanostructured rear point contact layer
15. Quenching Mo optical losses in CIGS solar cells by a point contacted dual-layer dielectric spacer : a 3-D optical study10.1364/OE.26.000A39 ↗
16. Employing Si solar cell technology to increase efficiency of ultra-thin Cu(In,Ga)Se2 solar cells10.1002/pip.2527 ↗
17. Well-controlled dielectric nanomeshes by Colloidal nanosphere lithography for optoelectronic enhancement of ultrathin Cu(in,Ga)Se2 solar cells10.1021/acsami.6b10135 ↗
18. Optical lithography Patterning of SiO2 layers for interface passivation of thin film solar cells10.1002/solr.201800212 ↗
19. Moiré nanosphere lithography10.1021/acsnano.5b00978 ↗
20. Large-area nanosphere Self-Assembly by a Micro-Propulsive Injection method for high Throughput periodic surface Nanotexturing10.1021/acs.nanolett.5b01202 ↗
21. High-efficiency Cu(In,Ga)Se2 solar cells made from (In,Ga)2Se3 precursor films
22. Fabrication of Nanoscale Rings , Dots , and Rods by combining shadow nanosphere lithography and Annealed polystyrene nanosphere masks10.1002/smll.200400099 ↗
23. A broadband solar absorber with 12 nm thick ultrathin a-Si layer by using random metallic nanomeshes
24. Review on light management by nanostructures in chalcopyrite solar cells10.1088/1361-6641/aa59ee ↗
25. The effect of surface roughness on the determination of optical constants of CuInSe2 and CuGaSe2 thin films
26. Influence of substrate and its temperature on the optical constants of Cu(In,Ga)Se2 thin films10.1088/0022-3727/47/13/135101 ↗
27. Addressing the impact of rear surface passivation mechanisms on ultra-thin Cu(In,Ga)Se2 solar cell performances using SCAPS 1-D model10.1016/j.solener.2017.08.055 ↗
28. Casper · Phys. Status Solidi RRL · 2016 · 10 · 37610.1002/pssr.201600018 ↗
29. Structure and interface chemistry of MoO3 back contacts in Cu(In,Ga)Se2 thin film solar cells10.1063/1.4862404 ↗
30. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
31. Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
32. Determination of back contact barrier Height in Cu(in,Ga)(Se,S)2 and CdTe solar Celles
33. Electrical impact of MoSe2 on CIGS thin-film solar cells10.1039/c3cp53310g ↗
34. Industrial PERL-type solar cells exceeding 19 % with screen-printed contacts and homogeneous emitter10.1016/j.solmat.2012.05.006 ↗
35. Approach for Al2O3 rear surface passivation of industrial p-type Si PERC above 19%10.1002/pip.2196 ↗