journal article·2013-06

Hydrazine solution-processed CuIn(Se,S)2 thin film solar cells: Secondary phases and grain structure

Choong-Heui Chung, Brion Bob, Bao Lei, Sheng-Han Li, William W. Hou, Yang Yang

Publisher page

Abstract

We have carried out microstructural studies of secondary phase formation at the Mo/CuIn(Se,S)2 interface, and of grain structure in hydrazine solution-processed CuIn(Se,S)2 films. The CuIn(Se,S)2 layers were deposited on Mo-coated glasses followed by thermal annealing under a nitrogen ambient. In our previous work, we identified [Cu6S4]2− and [In2(Se,S)4]2− as the two major molecular species present in hydrazine CuIn(Se,S)2 precursor solutions. The CuIn(Se,S)2 films prepared by the precursor solution containing only above two molecular complexes exhibited the undesired secondary interfacial phases such as CuSe and CuIn5S8. It is likely that the reactions between the Mo bottom electrode with sulfur in [Cu6S4]2− can result in the formation of a MoS2 phase, triggering the phase separation of CuIn(Se,S)2 into CuSe and CuIn5S8. To make matters worse, the final CuIn(Se,S)2 films contain a lot of voids that reduce the structural and electrical integrity of the device. The addition of polyselenide molecules [Se]n into the above CuIn(Se,S)2 precursor solutions introduced MoSe2 rather than MoS2 at the back interface which in turn allows sulfur to remain in [Cu6S4]2− complexes. As a result, only the desired phases, CuIn(Se,S)2 and MoSe2, were formed near the back interface. Furthermore, The formation of voids within the film can be also prevented by adding [Se]n into the CuIn(Se,S)2 precursor solution, leading to the formation of a dense film structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Crystalline thin-foil silicon solar cells: where crystalline quality meets thin-film processing10.1002/pip.1238 ↗
2. Thin-film solar cells: review of materials, technologies and commercial status10.1007/s10854-007-9177-9 ↗
3. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
4. 19.9%-Efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
5. MoSe2 layer formation at Cu(In,Ga)Se2/Mo interfaces in high efficiency Cu(In,Ga)Se2 solar cells10.1143/JJAP.37.L71 ↗
6. Long lifetimes in high-efficiency CuInGaSe2 solar cells10.1063/1.2957983 ↗
7. Non-vacuum processing of CuIn1−xGaxSe2 solar cells on rigid and flexible substrates using nanoparticle precursor inks10.1016/S0040-6090(03)00253-0 ↗
8. Low cost processing of CIGS thin film solar cells
9. Low cost CIGS solar cells by paste coating and selenization10.1016/j.tsf.2004.11.007 ↗
10. Non-vacuum methods for formation of Cu(In,Ga)(Se,S)2 thin film photovoltaic absorbers10.1002/pip.914 ↗
11. Direct liquid coating of chalcopyrite light-absorbing layers for photovoltaic devices10.1002/ejic.200900837 ↗
12. Low-cost inorganic solar cells: from ink to printed device10.1021/cr100191d ↗
13. A high-efficiency solution-deposited thin-film photovoltaic device10.1002/adma.200800555 ↗
14. 12% efficiency CuIn(Se,S)2 photovoltaic device prepared using a hydrazine solution process10.1021/cm901950q ↗
15. Optimization of CIGS-based PV device through antimony doping10.1021/cm903428f ↗
16. T.K. Todorov, O. Gunawan, T. Gokmen, D.B. Mitzi, Solution-processed Cu(In,Ga)(S,Se)2 absorber yielding a 15.2% efficient solar cell, Progress in Photovoltaics: Research and Applications 10.1002/pip.1253 (2012).10.1002/pip.1253 ↗
17. Low-temperature processing of a solution-deposited CuInSSe thin-film solar cell10.1016/j.tsf.2009.06.032 ↗
18. Identification of the molecular precursors for hydrazine solution processed CuIn(Se,S)2 films and their interactions10.1021/cm103258u ↗
19. Mechanism of sulfur incorporation into solution processed CuIn(Se,S)2 films10.1021/cm201827c ↗
20. Electrical properties of the Cu(In,Ga)Se2/MoSe2/Mo structure10.1016/S0927-0248(00)00283-X ↗
21. Formation and characterisation of MoSe2 for Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2004.11.098 ↗
22. Microstructure and secondary phases in coevaporated CuInS2 films: dependence on growth temperature and chemical composition10.1116/1.1329123 ↗
23. Raman microprobe characterization of electrodeposited S-rich CuIn(S,Se)2 for photovoltaic applications: microstructural analysis10.1063/1.2734103 ↗
24. Analysis of S-rich CuIn(S,Se)2 layers for photovoltaic applications: influence of the sulfurization temperature on the crystalline of electrodeposited and sulfurized CuInSe2 precursors10.1063/1.2939833 ↗
25. Raman scattering in CuInS2xSe2(1−x) mixed crystals10.1088/0953-8984/6/49/003 ↗
26. Micro-Raman spectroscopy on polycrystalline CulnSe2 formation10.1007/BF00332168 ↗
27. Anion distributions and phase transitions in CuS1−xSex (x=0–1) studied by Raman spectroscopy10.1006/jssc.1993.1242 ↗
28. Raman spectra of thin solid films of some metal sulfides10.1016/S0022-2860(96)09713-X ↗
29. Vibration spectra of spinel-type compound Cu3In5S810.1002/pssb.2221690242 ↗
30. Solution processing of chalcogenide semiconductors via dimensional reduction10.1002/adma.200802027 ↗
31. Electrochemical synthesis of CuIn(S,Se)2 alloys with graded composition for high efficiency solar cells10.1063/1.3080654 ↗