Large area p-type PERL cells featuring local p+ BSF formed by laser processing of ALD Al2O3 layers
Source abstract
Abstract
Abstract In this work we present large area p-type PERL solar cells featuring local p + Back-Surface-Field (BSF) obtained by pico-second (ps) laser processing of thin ALD Al 2 O 3 layers capped either by PECVD SiN x or PECVD SiO x . In this specific approach, the laser processing is performed through the rear passivation stack, whereby the laser simultaneously patterns the dielectrics for the subsequent Al–Si contact formation, whilst incorporating the Al atoms from the Al 2 O 3 film into the underlying Si bulk. With this technique, we register substantial dopant incorporation for 10 nm of ALD Al 2 O 3 , without using additional doping sources. When this process is coupled to a front metallization scheme based on Cu plating, p-PERL cells can be fabricated adopting only low temperature process steps, which avoids thermal stability issues related to the Al 2 O 3 layer, such as crystallization and blistering, and improves the properties of the rear reflector by avoiding Al–Si alloying. Efficiencies up to 20.7% are reported on 6-in. Cz–Si solar cells featuring local p + BSF formed by laser doping through a rear stack composed of 10 nm ALD Al 2 O 3 and 120 nm PECVD SiN x .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge10.1016/j.solmat.2006.04.014 ↗
2. Silicon surface passivation by atomic layer deposited Al2O310.1063/1.2963707 ↗
3. Dingemans · 2011
4. Approach for Al2O3 rear surface passivation of industrial p-type Si PERC above 19%10.1002/pip.2196 ↗
5. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
6. Very low surface recombination velocity on p-type c-Si by high-rate plasma-deposited aluminum oxide10.1063/1.3250157 ↗
7. Inductively coupled plasma chemical vapour deposited AlOx/SiNy layer stacks for applications in high-efficiency industrial-type silicon solar cells10.1016/j.solmat.2013.01.036 ↗
8. Surface passivation of c-Si by atmospheric pressure chemical vapor depostion of Al2O310.1063/1.4718596 ↗
9. Comparison of ICP-AlOx and ALD-Al2O3 layers for the rear surface passivation of C-Si solar cells10.1016/j.egypro.2012.07.080 ↗
10. High-speed spatial atomic-layer deposition of aluminum oxide layers for solar cell passivation10.1002/adma.201000766 ↗
11. Spatially separated atomic layer deposition of Al2O3, a new option for high throughput Si solar cell passivation10.1002/pip.1092 ↗
12. Redistribution of dopants in ion‐implanted silicon by pulsed‐laser annealing10.1063/1.90456 ↗
13. Ultra-flat p–n junctions formed by solid source laser doping10.1016/0169-4332(90)90168-Y ↗
14. D. Kray, M. Aleman, A. Fell, S. Hopman, K. Mayer, M. Mesec, R. Muller, G.P. Willeke, S.W. Glunz, B. Bitnar, D.H. Neuhaus, R. Ludemann, T. Schlenker, D. Manz, A.Bentzen, E. Sauar, A. Pauchard, B. Richerzhagen, Laser-doped silicon solar cells by laser chemical processing (LCP) exceeding 20% efficiency, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, 2008, pp. 1–3.10.1109/PVSC.2008.4922848 ↗
15. S.R. Wenham, M.A. Green, Self Aligning Method for Forming A Selective Emitter and Metallization in a Solar Cell, US Patent 6429039, 2002.
16. L. Hennen, E.H.A. Grannemann, W.M.M. Kessels, Analysis of blister formation in spatial ALD Al2O3 for silicon surface passivation, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2012, pp. 001049–001054.10.1109/PVSC.2012.6317783 ↗
17. B. Vermang, H. Goverde, A. Lorenz, A. Uruena, G. Vereecke, J. Meerschaut, E.Cornagliotti, A. Rothschild, J. John, J. Poortmans, R. Mertens, On the blistering of atomic layer deposited Al2O3, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2011, 2011
18. Al2O3/SiNx-stacks at increased temperatures: avoiding blistering during contact firing10.1016/j.egypro.2012.07.088 ↗
19. A. Richter, F.M.M. Souren, D. Schuldis, R.M.W. Gortzen, J. Benick, M. Hermle, S.W. Glunz, Thermal stability of spatial ALD deposited Al2O3 capped by PECVD SiNx for the passivation of lowly- and highly-doped p-type silicon surfaces, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012, pp. 1133–1137.
20. Understanding the mechanisms of rear reflectance losses in PERC type silicon solar cells10.1016/j.egypro.2013.07.349 ↗
21. Laser-fired rear contacts for crystalline silicon solar cells10.1002/pip.422 ↗
22. Laser processing of Al2O3/a-SiCx:H stacks: a feasible solution for the rear surface of high-efficiency p-type c-Si solar cells10.1002/pip.2207 ↗
23. Al+-doping of Si by laser ablation of Al2O3/SiN passivation10.1002/pssa.201329058 ↗
24. A. Fell, E. Franklin, D. Walter, D. Suh, K.J. Weber, Laser doping from Al2O3 layers, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012, pp. 706–708.
25. B. Xiao, B. Hallam, L. Mai, D. Lin, C.M. Chong, A.J. Lennon, S.R. Wenham, Rear side laser doping through PECVD AlOx/SiNx passivation dielectrics on P-Type Cz silicon solar cells, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, 2013, pp. 1989–1993.
26. Thermochemical and kinetic databases for the solar cell silicon materials10.1007/978-3-642-02044-5_13 ↗
27. Kinetics of the boron–oxygen related defect in theory and experiment10.1063/1.3517155 ↗
28. H. Fischer, W. Pschunder, Investigation of photon and thermal induced changes in silicon solar cells, in: Proceedings of the 10th Photovoltaic Specialists Conference, 1974, pp. 404–411.
29. Laser induced defects in laser doped solar cells10.1002/pip.1043 ↗
30. On c-Si surface passivation mechanism by the negative-charge-dielectric Al2O310.1063/1.3021091 ↗
31. E. Cornagliotti, L. Tous, A. Uruena, A. Rothschild, R. Russell, V. Lu, S. Radosavljevic, J. John, J. Toman, M. Aleman, F. Duerinckx, J. Poortmans, J. Szlufcik, B. Dielissen, F.M.M. Souren, X. Gay, R. Gortzen, B. Hallam, Integration of spatial ALD aluminum oxide for rear side passivation of p-Type PERC/PERL solar cells, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, 2013, pp. 976–981.
32. A.M. Wenham, Z. Hameri, J. Jia Ji, L. Mai, Z. Shi, B. Thahjono, S.R. Wenham, Photovoltaic Device Structure and Method, Patent WO2010091466 A1, 2010.
33. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗
34. Selective emitters in buried contact silicon solar cells: some low cost solutions10.1016/S0927-0248(00)00104-5 ↗
35. Generation of defect-related acceptor states by laserdoping10.1016/j.solmat.2012.06.045 ↗
36. Efficiency enhancement of i-PERC solar cells by implementation of a laser doped selective emitter10.1016/j.solmat.2014.11.028 ↗
37. R.A. Sinton, A. Cuevas, M. Stuckings, Quasi-steady-state photoconductance, a new method for solar cell material and device characterization, in: Proceedings of the 25th IEEE Photovoltaic Specialists Conference, 1996, pp. 457–460.10.1109/PVSC.1996.564042 ↗
38. Investigating manufacturing options for industrial PERL-type Si solar cells10.1016/j.solmat.2013.02.012 ↗
39. L. Tous, R. Russell, J. Beckers, J. Bertens, E. Cornagliotti, P. Choulat, J. John, F. Duerinckx, J. Szlufcik, J. Poortmans, R. Mertens, A simple copper based plating process resulting in high cell efficiencies and reliable modules using pilot processing equipment, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, 2013, pp. 1008–1012.
40. R. Russell, L. Tous, H. Philipsen, J. Horzel, E. Cornagliotti, M. Ngamo, P. Choulat,R. Labie, J. Beckers, J. Bertens, M. Fuji, J. John, J. Poortmans, R. Mertens, A simple copper metallisation process for high cell efficiencies and reliable modules, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, 2012, pp. 538–543.
41. Hallam · 2015
42. Excimer-laser doping of spin-on dopant in silicon10.1016/0169-4332(93)90032-7 ↗
43. Additional structure in infrared excitation spectra of group-III acceptors in silicon10.1103/PhysRevB.27.4826 ↗
44. F. Huster, G. Schubert, ECV doping profile measurements of aluminium alloyed back surface fields, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference and Exhibition, 2005.
45. Incomplete ionization of aluminum in silicon and its effect on accurate determination of doping profile10.1063/1.4833242 ↗
46. J. Bovatsek, A. Sugianto, B. Hallam, B. Tjahjono, S. Wenham, R. Patel, High-speed fabrication of laser doping selective emitter solar cells using 532nm continuous wave (CW) and modelocked quasi-CW laser sources, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, 2011, pp. 895–900.
47. S. Bowden, A. Rohatgi, Rapid and accurate determination of series resistance and fill factor losses in industrial silicon solar cells, in: Proceedings of the 17th European Photovoltaic Solar Energy Conference and Exibition, 2001.
48. Interaction between Al–Si melt and dielectric layers during formation of local Al-alloyed contacts for rear-passivated Si solar cells10.1002/pssa.201228353 ↗
49. Parasitic absorption in the rear reflector of a silicon solar cell: simulation and measurement of the sub-bandgap reflectance for common dielectric/metal reflectors10.1016/j.solmat.2013.06.024 ↗
50. P.A. Basore, Extended spectral analysis of internal quantum efficiency, in: Proceedings of the 23rd IEEE Photovoltaic Specialists Conference, 1993, pp. 147–152.10.1109/PVSC.1993.347063 ↗
51. E. Cornagliotti, A. Uruena, J. Horzel, J. John, L. Tous, D. Hendrickx, V. Prajapati, S. Singh, R. Hoyer, F. Delahaye, K. Weise, D. Queisser, H. Nussbaumer, J. Poortmans, How much rear side polishing is required? a study on the impact of rear side polishing in PERC solar cells, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012, pp. 561–566.10.1016/j.egypro.2012.07.110 ↗
52. Al–0.9% Si/Si Ohmic contacts to shallow junctions10.1149/1.2124131 ↗
53. Operating limits of Al-alloyed high-low junctions for BSF solar cells10.1016/0038-1101(81)90038-1 ↗
54. Solar cell contact resistance—a review10.1109/T-ED.1984.21583 ↗