A superstrate solar cell based on In2(Se,S)3 and CuIn(Se,S)2 thin films fabricated by electrodeposition combined with annealing
Source abstract
Abstract
Abstract Stacked thin films composed of In2(Se,S)3 and CuIn(Se,S)2 layers were grown on a fluorine-doped tin oxide (FTO)-coated glass substrate using electrodeposition of the corresponding selenide (In2Se3 and CuInSe2) precursors followed by annealing in H2S flow (5% in Ar). Structural characterizations of both layers revealed that the resulting film quality strongly depended on annealing conditions of both CuIn(Se,S)2 and In2(Se,S)3 layers: a compact and uniform film was obtained by annealing both layers at 400 °C. Performance of Au/CuIn(Se,S)2/In2(Se,S)3/FTO superstrate-type solar cells also followed these structural characteristics, i.e., a preliminary conversion efficiency of 2.9% was obtained on the device based on 400 °C-annealed In2(Se,S)3 and CuIn(Se,S)2 layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Highly efficient Cu(In,Ga)Se2 mini-modules10.1016/S0927-0248(02)00102-2 ↗
2. Development of large-area CIGS modules10.1016/S0927-0248(02)00103-4 ↗
3. Second generation CIS solar modules10.1016/j.solener.2004.05.011 ↗
4. One step electrodeposition of CuInSe2: improved structural, electronic, and photovoltaic properties by annealing under high selenium pressure10.1063/1.361446 ↗
5. 14.1% CuIn1-xGaxSe2-based photovoltaic cells from electrodeposited precursor10.1149/1.1838823 ↗
6. Junction formation studies of one-step electrodeposited CuInSe2 on CdS10.1149/1.1391578 ↗
7. Cadmium-free CuInSe2 superstrate solar cell fabricated by electrodeposition using a ITO/In2Se3/CuInSe2/Au structure10.1002/(SICI)1099-159X(199903/04)7:2<129::AID-PIP252>3.0.CO;2-R ↗
8. Comparison of structural and electrical properties of Cu(In,Ga)Se2 for substrate and superstrate solar cells10.1016/S0040-6090(01)01508-5 ↗
9. Chalcopyrite thin film solar cells by electrodeposition10.1016/j.solener.2004.05.024 ↗
10. Analysis of electronic transport properties of thin film CuIn(S,Se)2 solar cells based on electrodeposition10.1016/j.tsf.2007.12.006 ↗
11. Crystallization of In-Se/CuInSe2 thin-film stack by sequential electrodeposition and annealing10.1016/j.jcrysgro.2008.09.090 ↗
12. Electrochemical synthesis of CuIn(Se,S)2 layer for thin-film solar cell with a superstrate configuration10.1149/1.3254167 ↗
13. Superstrate-type Cu(In,Ga)Se2 solar cells with ZnO buffer layers10.1143/JJAP.37.L499 ↗
14. Experimental evidence of the low-temperature formation of γ-In2Se3 thin films obtained by a solid-state reaction10.1016/S0040-6090(96)08799-8 ↗
15. Structural control of In2Se3 polycrystalline thin films by molecular beam epitaxy10.1002/pssc.200669524 ↗
16. Band gap energies of bulk, thin-film, and epitaxial layers of CuInSe2 and CuGaSe210.1063/1.366588 ↗
17. Solar cell efficiency tables (version 20)10.1002/pip.453 ↗
18. Effects of the surface Cu2−xSe phase on the growth and properties of CuInSe2 films10.1063/1.123639 ↗
19. Defects in Cu(In,Ga)Se2 semiconductors and their role in the device performance of thin-film solar cells10.1002/(SICI)1099-159X(199703/04)5:2<121::AID-PIP159>3.0.CO;2-4 ↗
20. Influence of heterointerfaces on the performance of Cu(In,Ga)Se2 solar cells with CdS and In(OHx,Sy) buffer layers10.1016/S0040-6090(03)00156-1 ↗