journal article·2012-12

Quantifying the effect of minority carrier diffusion and free carrier absorption on photoluminescence bulk lifetime imaging of silicon bricks

Bernhard Mitchell, Johannes Greulich, Thorsten Trupke

Publisher page

Abstract

Abstract The spatially resolved bulk lifetimes of silicon bricks can be obtained by spectral photoluminescence intensity ratio imaging. The underlying principle of this method, relevant experimental data and studies discussing its residual artefacts and limitations were published recently. To further discuss the accuracy and drawbacks of the method, the impact of lateral carrier diffusion into grain boundaries and the influence of free carrier absorption are analysed theoretically. A criterion is given by which the impact of minority carrier diffusion on the bulk lifetime image can be rated depending on both the distance to the grain boundary and the local grain bulk lifetime. We find that the impact of free carrier absorption on the calculation of quantitative bulk lifetime can be neglected for bricks commonly used for solar cell fabrication. However, free carrier absorption needs to be accounted for bricks with lifetimes in the millisecond range such as can be found in Czochralski grown material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Bulk minority carrier lifetimes and doping of silicon bricks from photoluminescence intensity ratios10.1063/1.3575171 ↗
2. Note on the interpretation of electroluminescence images using their spectral information10.1016/j.solmat.2008.07.013 ↗
3. B. Mitchell, J.W. Weber, D. Walter, D. Macdonald, T. Trupke, On the method of photoluminescence spectral intensity ratio imaging of silicon bricks: advances and limitations, Submitted for publication.
4. A. shkulkov, S. marchenko, B. chepurnoy, V. onishchenko, S. beringov, Y. cherpak, et al., multicrystalline silicon production for solar cells application by continuous induction melting in cold crucible (imcc), in: Proceedings of the 26th European Photovoltaic Conference, 2011, pp. 1923–1926.
5. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
6. Analytical expressions for spectral composition of band photoluminescence from silicon wafers and bricks10.1063/1.3645636 ↗
7. Synopsys Inc. (〈www.synopsys.com〉), Sentaurus Device, 2012.
8. Numerical modeling of highly doped Si:P emitters based on FermiDirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
9. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
10. Reassessment of the intrinsic carrier density in crystalline silicon in view of band-gap narrowing10.1063/1.1529297 ↗
11. A unified mobility model for device simulation–I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗
12. A unified mobility model for device simulation–II Temperature dependence of carrier mobility and lifetime10.1016/0038-1101(92)90326-8 ↗
13. Models for numerical device simulations of crystalline silicon solar cells—a review10.1007/s10825-011-0367-6 ↗
14. Temperature dependence of the radiative recombination coefficient of intrinsic crystalline silicon10.1063/1.1610231 ↗
15. Injection dependence of spontaneous radiative recombination in crystalline silicon: Experimental verification and theoretical analysis10.1063/1.2218041 ↗
16. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
17. Electron-hole recombination in germanium10.1103/PhysRev.87.387 ↗
18. Calculation of surface generation and recombination velocities at the Si-SiO2 interface10.1063/1.335562 ↗
19. Numerical modeling of highly doped Si:P emitters based on FermiDirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
20. Self-consistent optical parameters of intrinsic silicon at 300K including temperature coefficients10.1016/j.solmat.2008.06.009 ↗
21. Determining lifetime in silicon blocks and wafers with accurate expressions for carrier density10.1063/1.2818371 ↗
22. Silicon optical constants in the infrared10.1149/1.2407931 ↗
23. Free carrier absorption in silicon, IEEE10.1109/JSSC.1978.1051012 ↗
24. Free carrier absorption in heavily doped silicon layers10.1063/1.1690105 ↗
25. Infrared absorption in n-type silicon10.1103/PhysRev.108.268 ↗
26. B.J. Lee, Z.M. Zhang, Temperature and doping dependence of the radiative properties of silicon: drude model revisited, in: Proceedings of the 13th International Conference on Advanced Thermal Processing of Semiconductors, 2005, pp. 251–260.10.1109/RTP.2005.1613717 ↗
27. Green · Silicon Solar Cells: Advanced Principles and Practice · 1995
28. Free carrier absorption in p-type silicon10.1143/JPSJ.21.1222 ↗
29. A. Richter, S.W. Glunz, F. Werner, J. Schmidt, A. Cuevas, Advanced parameterization of the Auger recombination in crystalline silicon, Submitted for publication.
30. Limiting efficiency of crystalline silicon solar cells due to Coulomb-enhanced Auger recombination10.1002/pip.464 ↗
31. Quantitative carrier lifetime measurement with micron resolution10.1063/1.3462433 ↗
32. Efficiency limiting bulk recombination in multicrystalline silicon solar cells10.1016/j.solmat.2011.11.047 ↗
33. Analysis of performance limiting material properties of multicrystalline silicon10.1016/j.solmat.2010.04.010 ↗
34. Quality control of as-cut multicrystalline silicon wafers using photoluminescence imaging for solar cell production10.1016/j.solmat.2010.06.003 ↗