journal article·2015-01

Edge isolation of solar cells using laser doping

Catherine Chan, Malcolm Abbott, Brett Hallam, Mattias Juhl, Dong Lin, Zhongtian Li, Yang Li, John Rodriguez, Stuart Wenham

Publisher page

Abstract

Abstract A technique of using laser doped isolation lines to separate shunted edge regions from the active area of a solar cell is presented. Photoluminescence images are used to investigate the effectiveness of the edge isolation. Screen-printed silicon solar cells are fabricated to demonstrate the ability of the technique to remove the shunt path from the front emitter to rear contact whilst minimising edge recombination. It is found that a reduction of J 02 by on average a factor of more than three is possible compared to the standard method of cleaving for these laboratory cells, yielding an average improvement in FF of 1.7% abs , and 0.5% abs efficiency increase. The J 02 values achieved using this process are comparable to those achieved on solar cells with edges passivated with a thermal oxide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. E. Schneiderlöchner, D.H. Neuhause, F. Schitthelm, D. Hubatsch, R. Lüdemann, Review on different technologies for industrial solar cell edge isolation, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, Germany, 2006, pp. 923–925.
2. G. Emanuel, E. Schneiderlöchner, J. Stollhof, R. Gentischer, R. Preu, R. Lüdemann, High throughput laser isolation of crystalline silicon solar cells, in: Proceedings of the 17th European Photovoltaic Solar Energy Conference, Munich, Germany, 2001, pp. 1578–1581.
3. R. Preu, G. Emanuel, H. Schmidhuber, D. Biro, C. Voyer, W. Wolke, E. Schneiderlöchner, D. Untiedt, S. Klappert, Innovative and efficient production processes for silicon solar cells and modules, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, Paris, France, 2004, pp. 978–981.
4. F. Delahaye, M. Löhmann, M. Bauer, G. Vilsmeier, I. Melnyk, A. Hauser, C. Gerhards, M. Krause, S. Lust, W. Nußbaumer, W. Joos, Edge isolation: innovative inline wet processing -ready for industrial production, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, Paris, France, 2004, pp. 416–418.
5. McIntosh · 2001
6. Modeling, geometric optimisation and isolation of the edge region in silicon solar cells10.1016/j.solmat.2009.12.033 ↗
7. M. Hermle, J. Dicker, W. Warta, S.W. Glunz, G. Willeke, Analysis of edge recombination for high-efficiency solar cells at low illumination densities, in: Proceedings of 3rd World Conference on Photovoltaic Energy Conversion, 2003, pp. 1009–1012
8. S.W. Glunz, J. Dicker, M. Esterle, M. Hermle, J. Isenberg, F.J. Kamerewerd, J. Knobloch, D. Kray, A. Leimenstoll, F. Lutz, D. Oßwald, R. Preu, S. Rein, E. Schaffer, C. Schetter, H. Schmidhuber, H. Schmidt, M. Steuder, C. Vorgrimler, G. Willeke, High-efficiency silicon solar cells for low-illumination applications, in: Proceedings of the 29th Photovoltaics Specialist Conference, New Orleans, Louisiana, 2002, pp. 450–453.10.1109/PVSC.2002.1190556 ↗
9. Investigation of edge recombination effects in silicon solar cell structures using photoluminescence10.1063/1.2186510 ↗
10. The effect of sample edge recombination on the averaged injection-dependent carrier lifetime in silicon10.1063/1.3691230 ↗
11. The influence of parasitic effects on injection-level-dependent lifetime data10.1109/TED.2007.906970 ↗
12. Assessing the performance of surface passivation using low-intensity photoluminescence characterisation techniques10.1109/JPHOTOV.2013.2282739 ↗
13. P.A. Basore, E. Van Kerschaver, K. Cabanas-Holmen, J. Hummel, Y. Lin, C.P. Murcia, K. Fisher, S. Baker-Finch, O.-H. Park, F. Dross, E. Schmich, W. Wittmann, V. Noorai and D. Patel, All-aluminum screen-printed IBC Cells: design concept, in: Proceedings of the 39th IEEE Photovoltaics Specialists Conference, Tampa, Florida, 2013, pp. 900–903.10.1109/PVSC.2013.6744289 ↗
14. A.A. Mewe, M.K. Stodolny, J.A.M.v. Roosmalen, P.C.P. Bronsveld, G.J.M. Janssen, M.A.d. Keijzer, A.W. Weeber, XIS: A low-current, high-voltage back-junction back-contact photovoltaic device, in: Proceedings of the 39th IEEE Photovoltaics Specialists Conference, Tampa, Florida, 2013, pp. 891–895.10.1109/PVSC.2013.6744287 ↗
15. Influence of the junction area to edge area ratio on the open-circuit voltage of silicon solar cells10.1109/T-ED.1981.20645 ↗
16. J J.-H. Guo, J.E. Cotter, K.R. McIntosh, K.C. Fisher, F.W. Chen, A. Karpour, Edge passivation for small-area, high efficiency solar cells, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, pp. 1348–1351.
17. Numerical quantification and minimization of perimeter losses in high-efficiency silicon solar cells10.1002/(SICI)1099-159X(199609/10)4:5<355::AID-PIP145>3.0.CO;2-X ↗
18. Study on the edge isolation of industrial silicon solar cells with waterjet-guided laser10.1016/j.solmat.2007.05.028 ↗
19. New contact frame design for minimizing losses due to edge recombination and grid-induced shading10.1016/S0927-0248(02)00184-8 ↗
20. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗
21. Photoluminescence imaging of silicon wafers10.1063/1.2234747 ↗
22. Photoluminescence imaging for determining the spatially resolved implied open circuit voltage of silicon solar cells10.1063/1.4862957 ↗
23. B.S. Tjahjono, J.-H. Guo, Z. Hameiri, L. Mai, A. Sugianto, S. Wang, S.R. Wenham, High efficiency solar cells structures through the use of laser doping, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, pp. 966–969.
24. A. Sugianto, B.S. Tjahjono, J.-H. Guo, S.R. Wenham, Impact of laser induced defects on the performance of solar cells using localised laser doped regions beneath the metal contact, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, pp. 1759–1762.
25. Laser induced defects in laser doped solar cells10.1002/pip.1043 ↗
26. A. Sugianto, J. Bovatsek, S. Wenham, B. Tjahjono, X. Guangqi, Y. Yu, B. Hallam, B. Xue, N. Kuepper, C.M. Chong, R. Patel, 18.5% laser-doped solar cell on CZ p-type silicon, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, Hawaii, 2010, pp. 689–694.10.1109/PVSC.2010.5616914 ↗
27. Equivalent-circuit calculator, PV Lighthouse http://www.pvlighthouse.com.au/calculators/EC%20calculator/EC%20calculator.aspx, 2014.
28. R. Kuhn, P. Fath, E. Bucher, Effects of pn-junctions bordering on surfaces investigated by means of 2D-modeling, in: Proceedings of the 28th IEEE Photovoltaic Specialists Conference, Anchorage, Alaska, 2000, pp. 116–119.10.1109/PVSC.2000.915768 ↗