journal article·2014-08

Mo6S9−xIx nanowires as additives for enhanced organic solar cell performance

Aleksej Majkić, Christoph Gadermaier, Nevena Celic, Peter Topolovsek, Gvido Bratina, Dragan Mihailovic

Publisher page

Abstract

Abstract The efficiency of organic bulk heterojunction solar cells depends crucially on charge transport in the composite. The charge carrier mobilities in common polymer:fullerene blends are rather low and depend strongly on the film morphology. Here we show the improvement of performance of canonical polymer:fullerene solar cells by embedding highly dispersed Mo 6 S 9− x I x nanowires within their active layer. Adding 0.5 wt% of nanowires raises both the fill factor and the open-circuit voltage, resulting in 18% higher power conversion efficiency. We attribute this increase to improved charge transport by the embedded nanowire mesh and envisage further improvement by using higher nanowire weight fractions and thinner nanowire bundles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
3. Direct determination of the exciton binding energy of conjugated polymers using a scanning tunneling microscope10.1103/PhysRevLett.81.1082 ↗
4. Charge-density-based analysis of the current–voltage response of polythiophene/fullerene photovoltaic devices10.1073/pnas.1004363107 ↗
5. Charge transport and photocurrent generation in poly(3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
6. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 blends10.1063/1.2006986 ↗
7. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
8. Silver nanowire embedded in P3HT: PCBM for high-efficiency hybrid photovoltaic device applications10.1021/nn200469d ↗
9. Increasing the efficiency of charge extraction limited poly-(3-hexylthiophene):[6,6] phenyl C61 butyric acid methyl ester solar cells using single walled carbon nanotubes with metallic characteristics10.1063/1.3598081 ↗
10. Heterojunction photovoltaics using GaAs nanowires and conjugated polymers10.1021/nl1030166 ↗
11. High open-circuit voltage photovoltaic devices from carbon-nanotube-polymer composites10.1063/1.1535231 ↗
12. Air-stable monodispersed Mo6S3I6 nanowires10.1088/0957-4484/15/5/039 ↗
13. Inorganic molecular wires: physical and functional properties of transition metal chalco-halide polymers10.1016/j.pmatsci.2008.09.001 ↗
14. Ionization energy and energy gap structure of MoSI molecular nanowires: kelvin probe, ultraviolet photoelectron spectroscopy and cyclic voltammetry measurements10.1021/la1050767 ↗
15. Solubility of Mo6S4.5I4.5 nanowires10.1016/j.cplett.2004.11.006 ↗
16. Dispersion and purification of Mo6S3I6 nanowires in organic solvents10.1063/1.2405322 ↗
17. Exfoliation of Mo6SxI9−x nanowires in common solvents10.1051/epjap:2007029 ↗
18. Nanowire recognitive molecular-scale connectivity10.1021/nl070051v ↗
19. Quantum charge transport in Mo6S3I6 molecular wire circuits10.1103/PhysRevB.80.085402 ↗
20. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
21. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
22. Effect of molecular weight on the structure and morphology of oriented thin films of regioregular poly(3-hexylthiophene) grown by directional epitaxial solidification10.1002/adfm.200600673 ↗
23. Influence of single-walled carbon nanotubes induced crystallinity enhancement and morphology change on polymer photovoltaic devices10.1021/ja065035z ↗
24. The nature of in-plane skeleton Raman modes of P3HT and their correlation to the degree of molecular order in P3HT:PCBM blend thin films10.1021/ja2013104 ↗
25. Observation of extremely low percolation threshold in Mo6S4.5I4.5 nanowire/polymer composites10.1016/j.scriptamat.2005.10.015 ↗
26. Composites of poly(ε-caprolactone) and Mo6S3I6 nanowires10.1002/pat.1838 ↗