journal article·2014-11

Thermo-mechanical characterisation of fluoropolymer films for concentrated solar thermal applications

B. Hirschmann, G. Oreski, G. Pinter

Publisher page

Abstract

Abstract Renewable and clean energy sources are getting more important. Therefore, a resource-saving alternative to conventional solar concentrators has been designed. This pneumatic pre-stressed concentrator is completely made of polymer films. Due to its pre-stressed construction the mechanical properties of the transparent film have a high influence on the lifetime of the concentrator. The dimension stability of the film significantly affects the effectiveness of the systems due to the shift of the focus point of the reflected radiation after deformation. Therefore, special requirements concerning thermal and mechanical properties in the application relevant temperature range have to be fulfilled. The aim of this work is to characterise fluoropolymer films as transparent layers in a pneumatic pre-stressed sun concentrator. Fluoropolymers have been chosen due to their excellent optical and mechanical properties and their extraordinary stability against ultraviolet radiation. A total of five different fluoropolymer films have been selected and their thermal, mechanical and thermo-mechanical properties at application relevant temperatures were characterised. Even though no material complies with the requirements, an ethylene-tetrafluorethylene-copolymer (ETFE) is suggested, with the recommendation to adapt and adjust the film thickness and the production process to influence the morphology and subsequently the thermo-mechanical behaviour of the material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · High voltage insulation and dielectric phenomena · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. H.P. Sleeper Jr., 3,125,091, 1962
2. M.J. O’Neill, 6,111,190, 1998.
3. J. Page, P. Dentinger, J. Belanger, R. Lamkin, J. Liptac, G. Meess, Coolearth Solar, US20130314774, 2011.
4. R. Bertrand, 0 025 834 A2, 1980.
5. J. Piotrowski, US 2011/0155122 A1, 2010.
6. D.A. Clark, 4,203,425, 1978.
7. M.M.K.V. Sankrithi, US 7,997,264 B2, 2007.
8. J. Höfler, WO 2008/119094, 2008.
9. E.B. Cummings, US 2008/0047546 A1, 2007.10.1055/s-2007-992416 ↗
10. Structure–property correlations of polymeric films for transparent insulation wall applications. Part 1: solar optical properties10.1016/j.solener.2005.05.006 ↗
11. Structure–property correlations of polymeric films for transparent insulation wall applications. Part 2: infrared optical properties10.1016/j.solener.2005.05.007 ↗
12. Polymer films for solar energy applications—thermoanalytical and mechanical characterisation of ageing behaviour10.1016/j.polymdegradstab.2003.05.001 ↗
13. An experimental investigation of the scratch behaviour of polymers: 1. Influence of rate-dependent bulk mechanical properties10.1016/j.wear.2012.05.005 ↗
14. Scratch behaviour and material property relationship in polymers scratch behaviour and material property relationship in polymers10.1002/1099-0488(20010101)39:1<47::AID-POLB50>3.0.CO;2-2 ↗
15. Baur · 2007
16. Optical properties of polymeric materials for concentrator photovoltaic systems10.1016/j.solmat.2011.02.025 ↗
17. Study on application of PTFE, FEP and PFA fluoropolymers on radiation dosimetry10.1016/j.nima.2009.10.103 ↗
18. Fluoropolymer films in the photovoltaic industry10.1016/j.jfluchem.2004.05.013 ↗
19. Influence of the third monomer component on the temperature-dependent crystallite modulus and tie chain fraction evaluated for ethylene-tetrafluoroethylene copolymers10.1016/j.polymer.2011.12.024 ↗
20. Scheirs · 1997
21. Drobny · 2001
22. Ehrenstein · 2004
23. International Organisation for Standardisation, Plastics – Differential Scanning Salorimetry (DSC), Part 3: Determination of Temperature and Enthalpy of Melting and Crystallization, Geneve, 1999.
24. Thermal properties of proton-conducting radiation-grafted membranes10.1002/app.27947 ↗
25. Morphology and rheological properties of high density polyethylene/fluorothermoplastics blends10.1002/app.37830 ↗
26. Menard · 2008
27. International Organisation for Standardisation, ISO 527-3 Determination of Tensile Properties – Test Conditions for Films and Sheets, 1995.
28. Effect of radiation induced crosslinking and degradation of ETFE films10.1016/j.radphyschem.2012.06.030 ↗
29. 3M, Dyneon Fluoroplastic Granules: THV 500GZ, Datasheet, 2011. Available at: 〈http://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSu7zK1fslxtUn8mUm8_Sev7qe17zHvTSevTSeSSSSSS〉 (accessed 04.04.14).
30. 3M, Dyneon Fluorothermoplastics: Product Comparison Guide, Datasheet, 2010. Available at: 〈http://solutions.3mpoland.pl/3MContentRetrievalAPI/BlobServlet?lmd=1349776229000&locale=cs_CZ&assetType=MMM_Image&assetId=1319239508835&blobAttribute=ImageFile〉 (accessed 04.04.14).
31. Uniaxial and biaxial mechanical properties of ETFE foils10.1016/j.polymertesting.2011.02.004 ↗
32. Polyethylene yielding behaviour: what is behind the correlation between yield stress and crystallinity?10.1016/j.polymer.2009.05.017 ↗
33. Modelling tie chains and trapped entanglements in polyethylene10.1016/j.polymer.2012.05.045 ↗
34. The effect of crystallinity on fracture and yielding of polyethylenes10.1016/0032-3861(95)92219-5 ↗