A facile approach to achieve subambient radiative cooling through aluminum foils and polyethylene bubble wrap
Source abstract
Abstract
Abstract Subambient radiative cooling is an emerging passive cooling strategy that simultaneously reflects the incident solar irradiance to depress the heat gain and radiates heat from objects to enhance the heat loss without any electricity consumption from compressor-based air-conditioning. Although numerous efforts have been dedicated to developing materials, such as complicated photonic crystals and metamaterials or expensive polymer composites with both high solar reflectance and infrared emittance, the gap still exists between efficient radiative cooling performance and an affordable radiative cooling device. Here, a facile, low-cost, and home-built approach to achieve efficient subambient radiative cooling, which employs commercially available materials of the polyethylene (PE) bubble wrap and aluminum foils, is reported for scalable industrial and domestic applications. The aluminum foils are infrared-reflective and sunlight-opaque, acting as a solar shield and infrared waveguide, which can both block the solar irradiation and guide infrared thermal radiation to the cold outer space. PE thin film is infrared-transparent with a high mid-infrared transmittance that allows mid-infrared thermal radiation to pass through. It is thermally insulating with a low thermal conductivity of 0.038 W/m ⋅ K after being fabricated into air-filled bubbles to minimize parasitic non-radiative heat transfer. An average subambient temperature reduction of 4.0°C has been achieved during the noontime in summer. These commercially available materials make this design a practical technique for people to realize an affordable and comfortable interior environment during the summer in a cost-effective manner without any professional constructions. The nature of low-cost, home-built, and easily integrated into buildings renders it attractive for everyone, especially for those in developing regions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Psychological and Temporal Perspectives Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Radiative human body cooling by nanoporous polyethylene textile10.1126/science.aaf5471 ↗
2. Ecological responses to recent climate change10.1038/416389a ↗
3. The scientific consensus on climate change10.1126/science.1103618 ↗
4. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
5. C. Segar, Renewable augment gas Saudi energy mix, J. IEA 7 (4), 0000.
6. A radiative cooling structural material10.1126/science.aau9101 ↗
7. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
8. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling10.1126/science.aai7899 ↗
9. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling10.1126/science.aat9513 ↗
10. Subambient cooling of water: toward real-world applications of daytime radiative cooling10.1016/j.joule.2018.10.006 ↗
11. Scalable flexible hybrid membranes with photonic structures for daytime radiative cooling10.1002/adfm.201907562 ↗
12. High-performance subambient radiative cooling enabled by optically selective and thermally insulating polyethylene aerogel10.1126/sciadv.aat9480 ↗
13. Nanoporous polyethylene microfibres for large-scale radiative cooling fabric10.1038/s41893-018-0023-2 ↗
14. Bioinspired “skin” with cooperative thermo-optical effect for daytime radiative cooling10.1021/acsami.0c03897 ↗
15. Radiative cooling to deep sub-freezing temperatures through a 24-h day–night cycle10.1038/ncomms13729 ↗
16. Radiative cooling of solar absorbers using a visibly transparent photonic crystal thermal blackbody10.1073/pnas.1509453112 ↗
17. Radiative cooling of solar cells10.1364/OPTICA.1.000032 ↗
18. Color-preserving daytime radiative cooling10.1063/1.4835995 ↗
19. Radiative cooling of TiO2 white paint10.1016/0038-092X(78)90195-0 ↗
20. Temperature regulation in colored infrared-transparent polyethylene textiles10.1016/j.joule.2019.03.015 ↗
21. A robust convection cover material for selective radiative cooling applications10.1016/j.solmat.2011.05.027 ↗
22. Simultaneously and synergistically harvest energy from the sun and outer space10.1016/j.joule.2018.10.009 ↗
23. Thin cadmium sulphide film for radiative cooling application10.1016/j.optcom.2006.06.050 ↗
24. Plasmon-enhanced infrared emission approaching the theoretical limit of radiative cooling ability10.1021/acs.nanolett.0c01457 ↗
25. Colored and paintable bilayer coatings with high solar-infrared reflectance for efficient cooling10.1126/sciadv.aaz5413 ↗
26. Zhang · 2007
27. Modtran4 radiative transfer modeling for atmospheric correction
28. Daytime radiative cooling using near-black infrared emitters10.1021/acsphotonics.6b00991 ↗