journal article·2021-09

Small molecule organic solar cells toward improved stability and performance for Indoor Light Harvesting Application

Magaly Ramírez-Como, Angel Sacramento, José G. Sánchez, Magali Estrada, Josep Pallarès, Victor S. Balderrama, Lluis F. Marsal

Publisher page

Abstract

Abstract In this work, we fabricate, characterize and present a stability study of p-DTS(FBTTh2)2:PC70BM inverted organic solar cells (iOSCs) with two different solution-processed electron transport layers (ETLs), PFN and ZnO, under indoor light and AM 1.5 G illumination spectrum. A warm white color light-emitting diode was used as the indoor light source. Under the luminance of 1000 lux, a maximum power conversion efficiency (PCE) of 10.85% and maximum power density (MPP) of 45.1 μW/cm2 were obtained for cells with PFN as ETL. After 1536 h of constant indoor light illumination, the PCE remained above 70% of the original value. The best stability of encapsulated devices, under AM 1.5 illumination spectrum was also observed for these cells, which still maintained a PCE above 60% after 6000 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. High-efficiency organic solar cells based on a halide salt and polyfluorene polymer with a high alignment-level of the cathode selective contact10.1039/C8TA05778H ↗
2. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
3. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
4. Stability of polymer solar cells10.1002/adma.201104187 ↗
5. Photochemical stability of high efficiency PTB7:PC 70 BM solar cell blends10.1039/C4TA05641H ↗
6. Inverted polymer solar cells using inkjet printed ZnO as electron transport layer: characterization and degradation study10.1109/JEDS.2020.2968001 ↗
7. Fabrication and characterization of inverted organic PTB7:PC70BM solar cells using Hf-In-ZnO as electron transport layer10.1016/j.solener.2019.02.015 ↗
8. Performance parameters degradation of inverted organic solar cells exposed under solar and artificial irradiance, using PTB7:PC70BM as active layer
9. Comparative degradation analysis of V 2 O 5 , MoO 3 and their stacks as hole transport layers in high-efficiency inverted polymer solar cells10.1039/D1TC00219H ↗
10. Impact of inkjet printed ZnO electron transport layer on the characteristics of polymer solar cells10.1039/C8RA01481G ↗
11. Recent advances in processing of ZnO
12. Organic solar cells toward the fabrication under air environment10.1109/JPHOTOV.2016.2514743 ↗
13. NH 4 Cl‐modified ZnO for high‐performance CsPbIBr 2 perovskite solar cells via low‐temperature process10.1002/solr.201900363 ↗
14. Simple organic donors based on halogenated oligothiophenes for all small molecule solar cells with efficiency over 11%10.1039/D0TA00159G ↗
15. Highly efficient halogen-free solvent processed small-molecule organic solar cells enabled by material design and device engineering10.1039/C7EE00805H ↗
16. Efficient solution-processed small-molecule solar cells with inverted structure10.1002/adma.201300295 ↗
17. Review of the application of energy harvesting in buildings10.1088/0957-0233/25/1/012002 ↗
18. Indoor power harvesting using photovoltaic cells for low power applications
19. Is organic photovoltaics promising for indoor applications?10.1063/1.4954268 ↗
20. Indoor solar energy harvesting for sensor network router nodes10.1016/j.micpro.2007.02.006 ↗
21. Official Journal of the Federation · 2008 · vols. 1–9
22. Investigation of the organic solar cell characteristics for indoor LED light applications10.7567/JJAP.54.071602 ↗
23. Performance of III-V solar cells as indoor light energy harvesters10.1109/JPHOTOV.2015.2487825 ↗
24. Impact of the hafnium oxide as hole blocking layer on the performance of organic solar cells
25. Stability study of high efficiency polymer solar cells using TiOxas electron transport layer10.1016/j.solener.2017.04.013 ↗
26. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
27. Surface treatment by binary solvents induces the crystallization of a small molecular donor for enhanced photovoltaic performance10.1039/C5CP05644F ↗
28. Impact of hole blocking layer on the performance of solution-processed small molecule solar cells
29. ZnO-morphology-dependent effects on the photovoltaic performance for inverted polymer solar cells10.1016/j.solmat.2017.04.046 ↗
30. Inverted vs standard PTB7:PC70BM organic photovoltaic devices. The benefit of highly selective and extracting contacts in device performance10.1016/j.orgel.2014.08.008 ↗
31. Influence of active layer thickness on photovoltaic performance of PTB7:PC70BM bulk heterojunction solar cell10.1016/j.spmi.2019.106278 ↗
32. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I-V curves of organic solar cells10.1002/adfm.201002669 ↗
33. Oxygen doping of P3HT:PCBM blends: influence on trap states, charge carrier mobility and solar cell performance
34. Lumped parameter modeling of organic solar cells' S-shaped I-V characteristics10.1109/JPHOTOV.2012.2219503 ↗
35. Modelling solar cell S-shaped I-V characteristics with DC lumped-parameter equivalent circuits a review10.2298/FUEE1703327G ↗
36. On the differences between dark and light ideality factor in polymer:fullerene solar cells10.1021/jz4012146 ↗
37. Accurate analytical method for the extraction of solar cell model parameters10.1049/el:19840281 ↗
38. Degradation study under air environment of inverted polymer solar cells using polyfluorene and halide salt as electron transport layers10.1016/j.solener.2020.01.071 ↗
39. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
40. Identifying a threshold impurity level for organic solar cells: enhanced first-order recombination via well-defined PC84BM traps in organic bulk heterojunction solar cells10.1002/adfm.201100514 ↗
41. Physics of organic bulk heterojunction devices for photovoltaic applications10.1063/1.2198930 ↗
42. Origin of radiation-induced degradation in polymer solar cells10.1002/adfm.201000374 ↗
43. Organic photovoltaics for low light applications10.1016/j.solmat.2011.07.011 ↗
44. Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting10.1016/j.apenergy.2015.07.031 ↗
45. Performance evaluation method of organic photovoltaics under indoor light condition10.5796/electrochemistry.18-00027 ↗
46. Device characteristics and material developments of indoor photovoltaic devices10.1016/j.mser.2019.100517 ↗
47. Toward high-performance polymer photovoltaic devices for low-power indoor applications10.1002/solr.201700174 ↗
48. Amelenan · 2020 · 3378
49. Utilization of poly (4-styrenesulfonic acid) doped polyaniline as a hole transport layer of organic solar cell for indoor applications10.1016/j.tsf.2020.137921 ↗
50. Ultra-thick semi-crystalline photoactive donor polymer for efficient indoor organic photovoltaics10.1016/j.nanoen.2019.01.061 ↗
51. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
52. Procedures and practices for evaluating thin-film solar cell stability10.1002/aenm.201501407 ↗
53. The effect of post-processing treatments on inflection points in currentvoltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
54. Electronic memory effects in diodes of zinc oxide nanoparticles in a matrix of polystyrene or poly(3-hexylthiophene)10.1063/1.2794475 ↗
55. Influence of P3HT:PCBM blend preparation on the active layer morphology and cell degradation10.1016/j.microrel.2010.09.016 ↗
56. Degradation mechanisms in organic solar cells: localized moisture encroachment and cathode reaction10.1016/j.solmat.2012.04.038 ↗
57. Degradation of electrical properties of PTB1:PCBM solar cells under different environments10.1016/j.solmat.2014.02.035 ↗
58. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
59. Balderrama Vázquez · 2014
60. Definition of encapsulation barrier requirements: a method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗
61. A review on encapsulation technology from organic light emitting diodes to organic and perovskite solar cells10.1002/adfm.202100151 ↗
62. Novel acrylic monomers for organic photovoltaics encapsulation10.1016/j.solmat.2019.110210 ↗