Comparative study of different silicon oxides used as interfacial passivation layer (SiNy:H / SiOx /n+-Si) in industrial monocrystalline silicon solar cells
Source abstract
Abstract
Abstract Ultrathin silicon oxide (SiOx) is used as a passivating and tunneling layer in high efficiency passivated contact silicon (Si) wafer solar cells. In this work, the emitter surface passivation quality using a low-cost, low-temperature (40 °C), non-acidic and safe chemical oxide passivation process (named as NCPRE-oxide) grown using sodium hypochlorite solution is compared with other existing oxide growth or deposition processes such as dry thermal oxide, Radio Corporation of America standard clean-2 (RCA-2) chemical oxide, nitric acid based oxide, sulphuric acid based (Piranha) oxide, ozone based oxide and deposited oxide by plasma enhanced chemical vapour deposition on standard 6-inch textured Si wafers. All the oxides layers are capped with hydrogenated amorphous silicon nitride (SiNy:H) improve passivation of the n+-type Si surface. There is a substantial improvement in the effective minority carrier lifetime (τeff) for SiOx/SiNy:H stack on the phosphorous diffused pyramidal textured Si surface. Further, to compare the influence of NCPRE-oxide process with other oxide processes on the electrical performance of the final device, these different processes were included in the fabrication of large area industrial aluminum-back surface field (Al-BSF) solar cells. A comprehensive analysis based on ellipsometry for film thickness measurement, τeff measurement, cell current-voltage characteristics, photoluminescence imaging, internal quantum efficiency mapping, and front surface recombination velocity measurement is presented. The NCPRE-oxide process resulted in a similar improvement in passivation and cell efficiency as other oxide processes for Al-BSF cells. In addition, its low-cost, low thermal budget, easy waste disposal, and single-component nature make it viable for industrial scale implementation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Solar cell efficiency tables (version 53)10.1002/pip.3102 ↗
2. Philipps · 2019
3. Energy payback time and carbon footprint of commercial photovoltaic systems10.1016/j.solmat.2013.08.037 ↗
4. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
5. Review of status developments of high-efficiency crystalline silicon solar cells10.1088/1361-6463/aaac6d ↗
6. Working principle of carrier selective poly-si/c-si junctions: is tunneling the whole story?10.1016/j.solmat.2016.05.045 ↗
7. n-type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
8. A review on low temperature chemically formed silicon dioxide for solar cell applications
9. Injection-level-dependent recombination velocities at the Si-SiO2 interface for various dopant concentrations10.1063/1.356399 ↗
10. Stable passivations for high-efficiency silicon solar cells
11. Surface recombination velocity measurements at the silicon–silicon dioxide interface by microwave-detected photoconductance decay10.1063/1.357082 ↗
12. Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells10.1002/pip.1198 ↗
13. High surface passivation quality and thermal stability of ALD Al2O3 on wet chemical grown ultra-thin SiO2 on silicon10.1016/j.egypro.2011.06.197 ↗
14. Effective passivation of Si surfaces by plasma deposited SiOx/a-SiNx:H stacks10.1063/1.3595940 ↗
15. Aluminium oxide thin film deposited by spray coating for p-type silicon surface passivation10.1016/j.solmat.2019.03.048 ↗
16. Excellent surface passivation of heavily doped p + silicon by low-temperature plasma-deposited SiOx/SiNy dielectric stacks with optimised antireflective performance for solar cell application10.1016/j.solmat.2013.09.004 ↗
17. Nitric acid pretreatment for the passivation of boron emitters for n-type base silicon solar cells10.1063/1.2870202 ↗
18. Low-cost and low-temperature chemical oxide passivation process for large area single crystalline silicon solar cells10.1016/j.solener.2018.04.008 ↗
19. Passivated rear contacts for high-efficiency n-type si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
20. Simple cleaning and conditioning of silicon surfaces with UV/ozone sources10.1016/j.egypro.2014.08.067 ↗
21. n-type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
22. monoPoly cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
23. Assisted passivation by a chemically grown SiO2 layer for p-type selective emitter-passivated emitter and rear cells10.1016/j.solmat.2018.06.018 ↗
24. A new low-cost and low-temperature chemical passivation process for large area industrial single crystalline silicon wafers
25. Wet-chemical treatment for improved surface passivation of textured silicon heterojunction solar cells10.1016/j.egypro.2014.08.117 ↗
26. 2008
27. Nitric acid oxidation of Si (NAOS) method for low temperature fabrication of SiO2/Si and SiO2/SiC structures10.1016/j.apsusc.2010.03.092 ↗
28. Formation of 1030nm SiO2/si structure with a uniform thickness at ~120°C by nitric acid oxidation method10.1016/j.susc.2006.04.015 ↗
29. Low-temperature oxidation of silicon using UV-light-excited ozone10.1143/JJAP.44.L1144 ↗
30. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
31. S. Duttagupta, P. K. Basu, F.-J. Ma, B. Hoex, A. Aberle, Progress with cost-effective surface passivation of p+ silicon by PECVD SiNx, in: Proceedings of 29th European Photovoltaic Solar Energy Conference and Exhibition; 596-599.
32. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
33. Regulated low cost pre-treatment step for surface texturization of large area industrial single crystalline silicon solar cell10.1016/j.solmat.2010.02.025 ↗
34. Liquid silicate additive for alkaline texturing of mono-Si wafers to improve process bath lifetime and reduce IPA consumption10.1016/j.solmat.2013.01.037 ↗
35. Determination of front surface recombination velocity of silicon solar cells using the short-wavelength spectral response10.1016/j.solmat.2007.04.018 ↗
36. Dielectric surface passivation for silicon solar cells: a review10.1002/pssa.201700293 ↗
37. Measurement of the emitter saturation current by a contactless photoconductivity decay method
38. Verification of a generalized Planck law for luminescence radiation from silicon solar cells10.1007/BF00323895 ↗
39. Spatially resolved electrical parameters of silicon wafers and solar cells by contactless photoluminescence imaging10.1063/1.4792348 ↗
40. Active area cell efficiency (19%) monocrystalline silicon solar cell fabrication using low-cost processing with small footprint laboratory tools10.1007/s12034-018-1711-2 ↗
41. Novel low-cost alkaline texturing process for diamond-wire-sawn industrial monocrystalline silicon wafers10.1016/j.solmat.2018.05.047 ↗