Thermal regulation of satellites using adaptive polymeric materials
Source abstract
Abstract
Abstract This paper focuses on the thermal performances of an adaptive radiator made of 16 electroemissive devices (EEDs) acting as electro-active materials for thermal control of satellites. EEDs are similar to an electrochemical cell where one electrode serves as active layer in the infrared and is made of a conducting polymer, the poly(3,4-ethylenedioxythiophene) (PEDOT), interpenetrated into a polyethylene oxide/nitrile butadiene rubber (PEO/NBR) solid gel electrolyte as supporting matrix. First, EEDs were placed in moderate vacuum (10 -3 bars) to estimate their optical cyclability c.a. 4000 cycles in neutral and oxidized state. Then, an electro-emissive radiator (EER) assembled with 16 EEDs (total area of 80cm 2 ) was tested under space vacuum conditions. “Hot” and “cold” operating cases of the satellite were simulated and ability of the radiator to control radiative exchanges between the satellite and its environment was estimated by comparison with the currently used optical solar reflector (OSR) radiators. In low emissivity state, the EER can slow down the rejection of heat in a cold environment which is an interesting feature in terms of energy saving. Also when the EER is not directly exposed to the sun, it is able to reject the heat in the same way as the OSR radiator in a hot phase. By comparing the electrical consumption with a system operating with OSR, an energy saving in the order of 25% was demonstrated. Finally the EER exhibits bistability during many hours, i.e. memory effect once electrically switched into a given emissivity state, allowing to further reduce the electrical consumption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Spacecraft Design and Technology · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Controlling variable emittance (MEMS) coatings for space applications
2. Micro-satellites thermal control - concepts and components
3. NASA thermal control technologies for robotic spacecraft10.1016/S1359-4311(03)00036-X ↗
4. Beigbeder · 2009
5. Numerical and experimental investigation of thermal louvers for space applications10.1590/S0100-73862001000200004 ↗
6. Controlling variable emittance (MEMS) coatings for space applications
7. MEMS shutters for thermal control — flight validation and lessons learned
8. Variable emittance skins for active thermal control in spacecraft based on conducting polymers, ionic liquids and specialized coatings10.1063/1.3326293 ↗
9. Performance analysis of an electrostatic switched radiator using heat-flux-based emissivity measurement10.2514/1.35960 ↗
10. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
11. Far infrared electrochromism in unique conducting polymer systems10.1016/S0379-6779(00)01455-7 ↗
12. Conducting Polymer (CP) infrared electrochromics in spacecraft thermal control and military applications10.1016/S0379-6779(02)00682-3 ↗
13. A comprehensive study of infrared reflectivity of poly(3,4-ethylenedioxythiophene) model layers with different morphologies and conductivities10.1016/j.solmat.2015.06.047 ↗
14. Feasibility of conducting semi-IPN with variable electro-emissivity : a promising way for spacecraft thermal control10.1016/j.solmat.2011.06.017 ↗
15. Thermal control of satellites by polymer-based electro- emissive device in infrared Spectra : component design and ground thermal testing
16. Investigations of ionic liquids on the infrared electroreflective properties of poly(3,4-ethylenedioxythiophene)10.1016/j.solmat.2017.07.018 ↗
17. Robust solid polymer electrolyte for conducting IPN actuators10.1088/0964-1726/22/10/104005 ↗