Composite nanofibrous sheets of fatty acids and polymers as thermo-regulating enclosures
Source abstract
Abstract
Abstract In this work we report fabrication and study of Polyvinyl Alcohol (PVA)-Fatty acids composite nanofibrous mats with an aim to develop thermo-regulating enclosures. Fatty acids, an important class of phase change materials (PCM), can serve as energy storage/recovery materials due to their high latent heats. PCM-PVA composite nanomats are fabricated by incorporating the PCMs into electrospun polymeric mats by two methods: (i) in ‘drop-cast’ composite mats, the molten liquid binary mixtures of the PCMs are gently dropped on to the electrospun PVA nanomats and fill the voids by capillary-suction, and (ii) in ‘mixed-and-spun’ composite mats, the fatty acid mixture solution is mixed with the PVA spinning solution and electrospun. The nanofibrous-mats of PVA and a series of mixtures of lauric acid (LA) and stearic acid (SA) prepared using the above two methods are characterized using differential scanning calorimetry (DSC), X-Ray diffractometry, and scanning electron microscopy. Phase diagrams constructed using the transition temperatures from DSC are interpreted as phase diagrams of the LASA binary mixture inside a nanofibrous polymeric medium, as opposed to its bulk phase diagram. The LASA mixture in PVA nanomats exhibits a eutectic phase diagram similar to their phase behavior in bulk. However, the eutectic temperature ( T e ) is significantly altered in composite nanomats as compared to its bulk value of 39.5 °C: T e =34 °C in “drop cast” composite mats, and further drops to 30 °C in the “mixed-and-spun” composite mats. Tensile tests show considerable softening in the composite mats. Application of regular solution model suggests that an enhanced attraction between LA and SA components, attributed here to nanoconfinement, may be responsible for this change. SEM images show partial wetting of the PVA nanofibers by the fatty acids in “drop cast” composite mats and uniform fibers in “mixed-and-spun” composite mats samples. Thermoregulation ability of these mats is confirmed by monitoring the temperature vs. time profile inside a vial filled with hot water and wrapped around by the composite nanomats.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. W.E. Voisinet, D. Daymon, J.A. Slyh, U.S. Patent 4. Google Patents 747, 1988, 240.
2. Morphology and thermal properties of electrospun fatty acids/polyethylene terephthalate composite fibers as novel form-stable phase change materials10.1016/j.solmat.2008.05.013 ↗
3. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
4. Fatty acids as phase change materials: a review10.1016/j.rser.2013.08.107 ↗
5. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
6. Thermal properties and thermal reliability of eutectic mixtures of some fatty acids as latent heat storage materials10.1016/S0196-8904(03)00154-7 ↗
7. Fatty acids and their mixtures as phase-change materials for thermal energy storage10.1016/0165-1633(89)90054-3 ↗
8. Some fatty acids as phase-change thermal energy storage materials10.1016/0960-1481(94)90066-3 ↗
9. Study on phase diagram of fatty acids mixtures to determine eutectic temperatures and the corresponding mixing proportions10.1016/j.apenergy.2013.10.048 ↗
10. Thermal characteristics of eutectic mixture of capric-lauric acids as phase change material (PCM) in gypsum board
11. Eutectic mixtures of some fatty acids for low temperature solar heating applications: thermal properties and thermal reliability10.1016/j.applthermaleng.2005.01.010 ↗
12. Dantzig · 2009
13. The solid–liquid phase diagrams of binary mixtures of consecutive, even saturated fatty acids: differing by four carbon atoms10.1016/j.chemphyslip.2008.09.006 ↗
14. The solid–liquid phase diagrams of binary mixtures of even saturated fatty acids differing by six carbon atoms10.1016/j.tca.2009.06.018 ↗
15. Andrady · 2008
16. Electrospun nanofibrous mats absorbed with fatty acid eutectics as an innovative type of form-stable phase change materials for storage and retrieval of thermal energy10.1016/j.solmat.2012.10.022 ↗
17. Myristic acid/polyaniline composites as form stable phase change materials for thermal energy storage10.1016/j.solmat.2013.03.006 ↗
18. Electrospun phase change fibers based on polyethylene glycol/cellulose acetate blends10.1016/j.apenergy.2011.02.026 ↗
19. Electrospun ultrafine composite fibers consisting of lauric acid and polyamide 6 as form-stable phase change materials for storage and retrieval of solar thermal energy10.1016/j.solmat.2012.04.031 ↗
20. Structural Morphology and thermal performance of composite phase change materials consisting of capric acid series fatty acid eutectics and electrospun polyamide6 nanofibers for thermal energy storage10.1016/j.matlet.2012.08.067 ↗
21. Fabrication and characterization of electrospun SiO2 nanofibers absorbed with fatty acid eutectics for thermal energy storage/retrieval10.1016/j.solmat.2014.08.030 ↗
22. F. Anton, Process and Apparatus for preparing Artificial threads, U.S. Patent US1975504A, 1934.
23. X. Mo , S. Ramakrishna, Recent advances in polymer nanofibers
24. Electrospinning combined with nonsolvent-induced phase separation to fabricate highly porous and hollow sub micrometer polymer fibers10.1021/ie2009229 ↗
25. Manipulated Electrospun PVA Nanofibers with Inexpensive Salts10.1002/mame.201000188 ↗
26. Electrospun poly(vinyl alcohol)/phase change material fibers: morphology, heat properties, and stability10.1021/acs.iecr.5b01822 ↗
27. The preparation of PVA–Pt/TiO2 composite nanofiber aggregate and the photocatalytic degradation of solid-phase polyvinyl alcohol10.1016/S0141-3910(03)00080-6 ↗
28. Preparation and characterization of polyvinyl alcohol–selenide nanocomposites at room temperature10.1039/b107173b ↗
29. Preparation and characterization of stearic acid/expanded graphite composites as thermal energy storage materials10.1016/j.energy.2010.09.046 ↗
30. The X-ray diffraction and infrared spectra of molecular compounds of acetamide and long-chain saturated fatty acids10.1021/ja01609a022 ↗
31. Soild and liquid lipid-based binary solid lipid nanoparticles of diacerein: in vitro evaluation of sustained release, simultaneous loading of gold nanoparticles, and potential thermoresponsive behavior10.2147/IJN.S67147 ↗
32. Sandler · 2006
33. Effects of MWNT nanofillers on structures and properties of PVA electrospun nanofibres10.1088/0957-4484/18/22/225605 ↗
34. Development of non-woven nanofibers of egg albumen-poly (vinyl alcohol) blends: influence of solution properties on morphology of nanofibers10.1038/pj.2011.34 ↗