journal article·2016-12

Void formation in screen-printed local aluminum contacts modeled by surface energy minimization

Christopher Kranz, Ulrike Baumann, Bettina Wolpensinger, Friedrich Lottspeich, Matthias Müller, Phedon Palinginis, Rolf Brendel, Thorsten Dullweber

Publisher page

Abstract

Abstract We demonstrate that the presence of voids in local aluminum rear contacts of PERC solar cells reduces the Al-BSF depths when compared to filled contacts. However, since voided contacts still exhibit a shallow Al-BSF we conclude that voids form during the re-crystallization process of the Al-BSF and thus at a point in time during furnace firing, where the aluminum is liquid. We propose an analytical model for void formation which takes into account the surface energies of the silicon wafer, the liquid aluminum as well as the aluminum-oxide shells of the screen-printed aluminum layer. Using geometrical approximations the model predicts that voids occur if the contact height exceeds a certain value. Scanning electron microscope cross-section measurements demonstrate that indeed voids are observed only for contact heights larger than 21 µm. The physical reason is, that in case of large contact heights the Al melt energetically favors to wet the large surface area of the aluminum-oxide shells instead of the relatively small area of the silicon wafer surface. We find that so-called PERC+ solar cells with Al fingers as rear contacts instead of full-area Al layers exhibit significantly smaller contact heights and hence exhibit almost no voids. Additionally, PERC+ solar cells exhibit much deeper Al-BSFs compared to PERC cells over a large range of rear contact widths. Using a new analytical model for Al-BSF formation, we find that the different Al-BSF depths are described solely by the different amount of Al paste printed to the rear side of PERC and PERC+ cells. Consequently, the PERC+ cells achieve low contact recombination and high efficiencies of 21.1% for narrow contact lines around 50 µm width, whereas PERC solar cells obtain highest efficiencies of 21.2% for 80 µm wide contact lines.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Silicon Carbide Semiconductor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Q. Hanwha, Cells press release, 2015. Available at 〈http://investors.hanwha-qcells.com/releasedetail.cfm?ReleaseID=907243〉 (accessed on 20.11.15)
2. Model based continuous improvement of industrial p-type PERC technology beyond 21% efficiency10.1016/j.egypro.2015.07.073 ↗
3. P.J. Verlinden, W. Deng, X. Zhang, Y. Yang, Z. Xiong, J. Xu, Y. Shu, P. Quan, J. Sheng, Y. Chen, S. Zhang, J. Bao, F. Ping, Y. Zhang, Z. Feng, Strategy, development and mass production of high-efficiency crystalline silicon PV modules, in: Proceedings of the 6th World Conference on Photovoltaic Energy Conversion, Kyoto, Japan, 2014, pp. 485–488.
4. International Technology Roadmap for Photovoltaic (ITRPV.net), 2014 Results, April 2015. Available at 〈http://www.itrpv.net/Reports/Downloads/2015/〉 (accessed on 26.10.15)
5. The Al-Si (Aluminum-Silicon) system10.1007/BF02868729 ↗
6. Diffusion-based model of local Al back surface field formation for industrial passivated emitter and rear cell solar cells10.1002/pip.2388 ↗
7. E. Urrejola, K. Peter, H. Plagwitz, G. Schubert, Understanding and avoiding the formation of voids for rear passivated silicon solar cells, Presentation at the 3rd Metallization Workshop, Charleroi, Belgium, 2011.
8. K. Dressler, S. Dauwe, T. Droste, J. Rossa, B. Meidel, K. Schünemann, K. Ramspeck, Y. Gassenbauer, A. Metz, Characterisation of rear local contacts including BSF formation using Raman and scanning acoustic microscopy, in: Proceedings of the 27th European PV Solar Energy Conference, 2012, pp. 755–758.
9. Y. Chen, P.P. Altermatt, J. Dong, S. Zhang, J. Liu, D. Chen, W. Deng, Y. Jiang, B. Liu, W. Xiao, H. Zhu, H. Chen, H. Jiao, X. Pan, M. Zhong, D. Wang, J. Sheng, Y. Zhang, H. Shen, Z. Feng, P.J. Verlinden, Al-alloyed local contacts for industrial PERC cells by local printing, in: IEEE 40th Photovoltaic Specialist Conference, 2014, pp. 3322–3325.10.1109/PVSC.2014.6925645 ↗
10. Void formation on PERC solar cells and their impact on the electrical cell parameters verified by luminescence and scanning acoustic microscope measurements10.1016/j.egypro.2015.12.294 ↗
11. F. Lottspeich, M. Müller, M. Schuchart, M. Dullweber, G. Fischer, E. Schneiderlöchner, Investigation of rear contact resistance of line contacted industrial PERC solar cells, in: Proceedings of the 30th EU PVSEC, Hamburg, Germany, 2015.
12. C. Kranz, B. Wolpensinger, R. Brendel, T. Dullweber, Analysis of local aluminum rear contacts of bifacial PERC+ solar cells, IEEE J. Photovoltaics 6 (4), 2016, 830-836.10.1109/JPHOTOV.2016.2551465 ↗
13. R. Horbelt, A. Herguth, G. Hahn, R. Job, B. Terheiden, Temperature dependence of void formation in PERC cells and their spatially resolved detection by combining scanning acoustic microscopy and electroluminescence measurements, in: Proceedings of the 29th European PV Solar Energy Conference, 2014, pp. 427–432.
14. D. Chen, W. Deng, J. Sheng, H. Zhu, M. Zhong, W. Wang, F. Ye, W. Cai, Z. Feng, Y. Zhang, H. Shen, P.J. Verlinden, Preventing the formation of voids in the rear local contact areas for industrial-type PERC solar cells, in: Proceedings of the 28th European PV Solar Energy Conference, 2013, pp. 770–774.
15. Influence of Al particle size and firing profile on void formation in rear local contacts of silicon solar cells10.1109/JPHOTOV.2015.2491610 ↗
16. PERC+: industrial PERC solar cells with rear Al grid enabling bifaciality and reduced Al paste consumption
17. Silicon diffusion in aluminum for rear passivated solar cells10.1063/1.3579541 ↗
18. Zinc Diffusion in Alpha Brass
19. High volume pilot production of high efficiency PERC solar cells - analysis based on device simulation10.1016/j.egypro.2013.07.306 ↗
20. On the porosity observed in the Kirkendall effect10.1016/0001-6160(53)90112-6 ↗
21. In-situ transmission electron microscopy investigation of surface-oxide, stress-relief mechanisms during melting of sub-micrometer Al–Si alloy particles10.1016/j.msea.2003.10.315 ↗
22. Aluminum-silicon interdiffusion in screen printed metal contacts for silicon based solar cells applications10.1016/j.egypro.2013.11.094 ↗
23. Microstructure of void formation stages at local rear contacts10.1016/j.egypro.2015.07.100 ↗
24. Development of a closed cell aluminum alloy foam with enhancement of the compressive strength10.2320/matertrans.42.2118 ↗
25. Absolute surface energies of group-IV semiconductors: dependence on orientation and reconstruction10.1103/PhysRevB.65.115318 ↗
26. Modeling the formation of local highly aluminum-doped silicon regions by rapid thermal annealing of screen-printed aluminum10.1002/pssr.201105611 ↗