Stability of bilayer trimethine cyanine dye/fullerene organic solar cells
Source abstract
Abstract
The long-term (up to 100 days) stabilities of thin films of a trimethine cyanine dye (Cy3-P) and of Cy3-P/C-60 bilayer solar cells with initial power conversion efficiencies of up to 3.6% in the regular and inverted device architecture were studied. For storage conditions under nitrogen at room temperature in the dark, Cy3-P films were stable and no decrease in performance was measured for inverted ITO/TiO2/C-60/Cy3-P/ MoO3/Ag solar cells. ITO/PEDOT:PSS and aluminum were found to be responsible for a slight inherent degradation of regular solar cells under inert storage conditions. Solar cells stressed at accelerated (80 degrees C) full sun simulation showed a burn-in period of similar to 5 days with a performance loss of 75%. This initial performance decrease might be linked to the photopolymerization reaction of C-60. For longer times, performances stabilized and arrived at 15% of the initial values after a test period of 17 days. (C) 2013 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Fullerene Chemistry and Applications · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
2. Small molecule solution-processed bulk heterojunction solar cells10.1021/cm102189g ↗
3. Arylamine-based squaraine donors for use in organic solar cells10.1021/nl2022515 ↗
4. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
5. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
6. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
7. Stability of polymer solar cells10.1002/adma.201104187 ↗
8. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
9. The degradation of indium tin oxide/pentacene/fullerene/tris-8-hydroxy-quinolinato aluminum/aluminum heterojunction organic solar cells: by oxygen or moisture?10.1016/j.solmat.2010.01.006 ↗
10. Degradation of small-molecule organic solar cells10.1063/1.2422911 ↗
11. The effects of different atmospheric conditions on device stability of organic small-molecule solar cells under constant illumination10.1088/0268-1242/26/9/095020 ↗
12. The effect of barrier performance on the lifetime of small-molecule organic solar cells10.1016/j.solmat.2011.09.026 ↗
13. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
14. Ionic space charge driven organic photovoltaic devices10.2533/chimia.2007.787 ↗
15. Ionic space-charge effects in solid state organic photovoltaics10.1021/am1008216 ↗
16. Efficient, cyanine dye based bilayer solar cells10.1002/aenm.201200764 ↗
17. Improved performance of cyanine solar cells with polyaniline anodes10.1039/b925289d ↗
18. Influence of crystalline titanium oxide layer smoothness on the performance of inverted organic bilayer solar cells10.1063/1.4804599 ↗
19. Near-infrared organic compounds and emerging applications10.1002/asia.200900596 ↗
20. Near-infrared absorbing dyes10.1021/cr00014a003 ↗
21. Photostabilities of novel heptamethine 3H-indolenine cyanine dyes with different N-substituents10.1016/j.jphotochem.2005.11.004 ↗
22. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
23. Ion pairs of indobenzimidazolo cyanines: a structural study based on conductivity, absorption, fluorescence and 1H-NMR10.1016/S0022-2860(98)00397-4 ↗
24. Structural characterization of conjugated polyelectrolyte electron transport layers by NEXAFS spectroscopy10.1002/adma.200702995 ↗
25. Enhanced cyanine solar cell performance upon oxygen doping10.1016/j.orgel.2007.09.008 ↗
26. Progress in stability of organic solar cells exposed to air10.1016/j.solmat.2011.01.029 ↗
27. Stable organic photovoltaics using Ag thin film anodes10.1039/c2jm15670a ↗
28. Elschner · 2011
29. Stability of the interface between indium–tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
30. Blocking reactions between indium–tin oxide and poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) with a self-assembly monolayer10.1063/1.1469220 ↗
31. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
32. An inverted polymer photovoltaic cell with increased air stability obtained by employing novel hole/electron collecting layers10.1039/b815523b ↗
33. Inverted organic solar cells with ITO electrodes modified with an ultrathin Al2O3 buffer layer deposited by atomic layer deposition10.1039/c0jm00662a ↗
34. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
35. J.-H. Huang, H.-Y. Wei, K.-C. Huang, C.-L. Chen, R.-R. Wang, F.-C. Chen, K.-C. Ho, C.-W. Chu, Using a low temperature crystallization process to prepare anatase TiO2 buffer layers for air-stable inverted polymer solar cells, Energy and Environmental Science 3 (2010) 654–658.10.1039/b922373h ↗
36. High performance polythiophene/fullerene bulk-heterojunction solar cell with a TiOx hole blocking layer10.1063/1.2730746 ↗
37. Excited-state properties of C60 fullerene derivatives10.1021/ar990144m ↗
38. Aging of flat heterojunction zinc phthalocyanine/fullerene C60 organic solar cells10.1016/j.orgel.2009.12.010 ↗
39. Photoinduced polymerization of solid C60 films10.1126/science.259.5097.955 ↗
40. Photochemical transformation of C60 and C70 films10.1016/0040-6090(94)05704-4 ↗
41. C60 field-effect transistors: effects of polymerization on electronic properties and device performance10.1103/PhysRevB.75.075203 ↗