Examining the role of ultra-thin atomic layer deposited metal oxide barrier layers on CdTe/ITO interface stability during the fabrication of solution processed nanocrystalline solar cells
Source abstract
Abstract
Abstract Solution processed CdTe layers are a potentially low-cost alternative for use in thin-film solar cells. We have recently reported the use of such nanocrystalline layers within ITO/CdTe/ZnO/Al device architectures. One key concern with this type of device structure is the possibility of atomic scale interdiffusion between the ITO and CdTe layers, which can result in deleterious n-type doping of the CdTe layer. Rutherford Backscattering has been used to study the chemical composition across the ITO/CdTe interface as a function of thermal annealing temperature. Through these measurements we verify that interdiffusion is observed across the interface for annealing temperatures above 200 °C, and the extent of interdiffusion increases with temperature. Ultra-thin alumina, zirconia and titania layers deposited between the ITO and CdTe layers have been studied for their potential to act as a diffusion barrier. All investigated barriers successfully suppress interdiffusion. The outcomes of these compositional studies are directly compared to solar cells fabricated under analogous processing conditions, demonstrating improved cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. A new silicon p–n junction photocell for converting solar radiation into electrical power10.1063/1.1721711 ↗
2. Smil · 2012
3. A high-efficiency solution-deposited thin-film photovoltaic device10.1002/adma.200800555 ↗
4. Thin-film solar cells: review of materials, technologies and commercial status
5. Air-stable all-inorganic nanocrystal solar cells processed from solution10.1126/science.1117908 ↗
6. Solution-processed sintered nanocrystal solar cells via layer-by-layer assembly10.1021/nl201282v ↗
7. Sulfide nanocrystal inks for dense Cu(In1−xGax)(S1−ySey)2 absorber films and their photovoltaic performance10.1021/nl901538w ↗
8. Issues in thin film PV manufacturing cost reduction10.1016/S0927-0248(99)00019-7 ↗
9. Layer-by-layer assembly of sintered CdSexTe1−x nanocrystal solar cells10.1021/nn3009189 ↗
10. CdTe thin films from nanoparticle precursors by spray deposition10.1021/cm9601547 ↗
11. S.P. Allbright, S.X. Johnson, Module Process Optimization and Device Efficiency Improvement for Stable, Low-Cost, Large-Area, Cadmium Telluride-Based Photovoltaic Module Production, in: N.R.E.L.o.t.U.S.D.o. Energy (Ed.), National Renewable Energy Laboratory, Colorado, 1994.10.2172/10157621 ↗
12. Anderson · 2009
13. The impact of tellurium supply on cadmium telluride photovoltaics10.1126/science.1189690 ↗
14. CdTe solar cell in a novel configuration10.1002/pip.525 ↗
15. Bifacial configurations for CdTe solar cells10.1016/j.solmat.2007.03.010 ↗
16. CdTe Chottky diodes from colloidal nanocrystals
17. Singh · Semiconductor Devices an Introduction · 1994
18. A.A. Paul, G. Ilan, M. Delia, Nanocrystal Solar Cells Processed from Solution, in, University of California, 2007.
19. Influence of Al2O3 diffusion barrier and PbTiO3 seed layer on microstructural and ferroelectric characteristics of PZT thin films by sol–gel spin coating method10.1016/S0040-6090(97)00034-5 ↗
20. Diffusion barriers for CIGS solar cells on metallic substrates10.1016/S0040-6090(03)00259-1 ↗
21. The role of the spray pyrolysed Al2O3 barrier layer in achieving high efficiency solar cells on flexible steel substrates10.1007/s00339-010-6176-0 ↗
22. UV/ozone cleaning of surfaces10.1116/1.573115 ↗
23. Dependence of indium–tin–oxide work function on surface cleaning method as studied by ultraviolet and x-ray photoemission spectroscopies10.1063/1.371859 ↗
24. Growth of titanium dioxide thin films by atomic layer epitaxy10.1016/0040-6090(93)90172-L ↗
25. An electrochemical strategy to incorporate nitrogen in nanostructured TiO2 thin films: modification of bandgap and photoelectrochemical properties10.1088/0022-3727/39/11/008 ↗
26. Comparison of different thin film absorbers used in eta-solar cells10.1016/S0040-6090(03)00223-2 ↗
27. Sze · 2007