Electrochromic devices based on poly(3-methylthiophene) and various secondary electrochromic materials
Source abstract
Abstract
Abstract In this paper, the electrochemical properties of poly(3-methylthiophene) (PMT), poly(3,4-ethylenedioxythiophene) (PEDOT) and niobium pentoxide (Nb2O5) films deposited on ITO are described. PMT films were made by galvanostatic electrodeposition. PEDOT and Nb2O5 were deposited by spin-coating from a suspension, in the case of PEDOT, and from a precursor solution obtained by the Pechini method, for Nb2O5. Three electrochromic devices were assembled from these films, with different arrangements of electrodes, using poly(epichlorohydrin-co-ethylene oxide) (P(EPI-EO))+LiClO4 as the polymer electrolyte. The PMT films were employed as the working electrode (E1) and PEDOT, Nb2O5 or ITO as counter-electrodes (E2). The devices showed color changes from red to blue in response to the applied potential from −1.5 to +1.5 V (PMT vs. E2), respectively. The transmittance variation was measured in the visible region (λ=650 nm) during the polarization. The systems were also characterized with respect to their coulombic efficiency (CE), electrochromic efficiency (η) and response time (τ). The three devices gave similar results, as follows: CE of 107%, η from 92 to 126 cm2 C−1 and τ∼2 s. The cycle life and optical memory were also analyzed and the devices showed good durability for 1000 cycles and good optical memory, demonstrating the potential applicability of the electrochromic devices presented here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Transition Metal Oxide Nanomaterials · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Electrochemistry, polymers and opto-electronic devices: a combination with a future10.1590/S0103-50532002000400003 ↗
2. Electrochromic materials and devices: present and future10.1016/S0254-0584(01)00575-2 ↗
3. Optical devices based on conductive polymers
4. Electrochromic devices
5. 13C NMR and conductivity measurements of ethylene oxide-epychloridrine copolymer doped with LiClO410.1016/0167-2738(96)00062-8 ↗
6. Solid state polymeric electrolytes based on poly(epichlorohydrin)10.1016/S0167-2738(96)00493-6 ↗
7. Polymer electrolytes based on ethylene oxide-epichlorohydrin copolymers10.1016/S0167-2738(00)00550-6 ↗
8. Enhancement of photocurrent generation and open circuit voltage in dye-sensitized solar cells using Li+ trapping species in the gel electrolyte10.1039/b717278h ↗
9. Multicolored electrochromism polymers: structures and devices10.1021/cm049669l ↗
10. Electrochromic properties of poly{3-[12-(p-methoxyphenoxy)dodecyl]thiophene}10.1016/j.electacta.2003.12.044 ↗
11. Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate): a photoelectron spectroscopy study10.1002/polb.10659 ↗
12. Poly(3,4-ethylenedioxythiophene) and its derivatives: past, present, and future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
13. Conducting polymers for batteries, supercapacitors and optical devices
14. Monk · 1995
15. All polymeric solid state electrochromic devices10.1016/S0013-4686(99)00013-4 ↗
16. All-polymeric electrochromic and photoelectrochemical devices: new advances10.1016/S0013-4686(01)00684-3 ↗
17. Solid-state electrochromic device based on two poly(thiophene) derivatives10.1016/j.jelechem.2003.12.033 ↗
18. Preparation and properties of electrochromic iridium oxide thin film by sol–gel process10.1016/S0040-6090(99)00290-4 ↗
19. Electrochromic properties of rhodium oxide films prepared by a sol–gel method10.1016/S0040-6090(01)01604-2 ↗
20. Electrochromism of amorphous ruthenium oxide thin films10.1016/j.ssi.2003.08.035 ↗
21. A comparison of electrochromic properties of sol–gel derived amorphous and nanocrystalline tungsten oxide films10.1016/j.cap.2006.06.001 ↗
22. The electrochromic properties of nickel oxide by chemical deposition and oxidization10.1016/j.matlet.2005.10.031 ↗
23. Niobium tungsten titanium oxides: from “soft chemistry” precursors to electrochromic thin layer materials10.1016/0025-5408(92)90222-L ↗
24. Electrochromic coatings–applications and manufacturing issues10.1016/S0040-6090(98)01429-1 ↗
25. Chemical and optical properties of electrochromic nickel oxide films10.1016/0165-1633(86)90043-2 ↗
26. Dióxido de titânio sol–gel: propriedades e comportamento eletrocrômico10.1590/S0100-40422000000600003 ↗
27. M.P. Pechini, US Patent, no. 3.330.697, July 1967.
28. A novel synthetic route to Nb2O5 thin films for electrochromic devices10.1149/1.2054827 ↗
29. Influence of the crystallinity on Li+ intercalation process in Nb2O5 films10.1007/s10008-004-0637-3 ↗
30. Lithium insertion in TiO2 doped Nb2O5 electrochromic thin films10.1016/S0013-4686(01)00426-1 ↗
31. Electrochromic properties of pure and doped Nb2O5 coatings and devices10.1016/S0013-4686(01)00380-2 ↗
32. Electrochromic properties of undoped and lithium doped Nb2O5 films prepared by the sol–gel method10.1016/S0013-4686(01)00381-4 ↗
33. Electrochromic properties of sol–gel coating of Nb2O5 and Nb2O5:Li+10.1590/S1516-14392002000100007 ↗
34. Ionic transport of Li+ in polymer films consisting of poly(3,4-ethylenedioxythiophene) and poly(4-styrenesulphonate)10.1016/S0022-0728(00)00480-0 ↗
35. Solid state dye-sensitized solar cell: improved performance and stability using a plasticized polymer electrolyte10.1016/j.jphotochem.2005.11.028 ↗
36. Ultrafast electrochromic windows based on redox-chromophore modified nanostructured semiconducting and conducting films10.1021/jp001763b ↗
37. Inductive behaviour by charge-transfer and relaxation in solid-state electrochemistry10.1016/j.electacta.2005.05.025 ↗
38. Filmes de óxidos anódicos de nióbio: Efeito eletrocrômico e cinética da reação de eletro-intercalação10.1590/S0100-40421998000300009 ↗
39. Analysis of ion diffusion and charging in electronically conducting polydicarbazole films by impedance methods10.1016/j.electacta.2004.03.009 ↗
40. Switching behaviour in lightly doped polymeric porous film electrodes. Improving distributed impedance models for mixed conduction conditions10.1016/S0022-0728(01)00504-6 ↗
41. Conjugated poly(thiophenes): synthesis, functionalization, and applications10.1021/cr00012a009 ↗
42. Electrolyte effect on the electrochemical properties of poly(3-methylthiophene) thin films10.1016/0022-0728(87)87009-2 ↗
43. Electrochromic devices: a comparison of several systems10.1016/0927-0248(95)00057-7 ↗