Laser-doped metal-plated bifacial silicon solar cells
Source abstract
Abstract
Abstract In this paper we report on the fabrication of laser-doped p-type bifacial cells using self-aligned metal-plating with energy conversion efficiencies as high as 19.2%. A key fabrication step for these cells is recognising that the p-type silicon regions can be made cathodic by forward biasing the p–n junction in a process which we call here field-induced plating (FIP). Used in conjunction with light-induced plating (LIP) in the same plating apparatus, FIP can be used to form low cost nickel/copper grids on both surfaces of a cell. Furthermore, the simplicity of the FIP process means that it can potentially be performed using the same plating equipment and chemistry as used for LIP. Plating rates similar to LIP were achieved (i.e., ~10 µm of copper in 10 min), however there is potential to plate at much faster rates with FIP because the junction is forward-biased. This bifacial cell plating method could be adapted to metallise a range of bifacial cells including heterojunction cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Evolution of metal plating for silicon solar cell metallisation
2. Review of Ni–Cu based front side metallization for c-Si solar cells
3. Review of the potential of the Ni/Cu plating technique for crystalline silicon solar cells10.3390/ma7021318 ↗
4. T. Bruton, N. Mason, S. Roberts, O.N. Hartley, S. Gledhill, J. Fernandez, R. Russell, W. Warta, S. Glunz, O. Schultz, M. Hermle, G. Willeke, Towards 20% efficient silicon solar cells manufactured at 60MWp per annum, in: Third World Conference on Photovoltaic Energy Conversion Osaka, 2003, pp. 899–902.
5. N. Mason, T. Bruton, M.A. Balbuena, Laser grooved buried grid silicon solar cells: from pilot line to 50MWp manufacture in ten years, in: PV in Europe, Rome, 2002, pp. 227–229.
6. N. Mason, R. Russell, A. Artigao, J. Fernandez, O. Nast-Hartley, J. Sherborne, P. Banda, R. Bueno, G. Martinez, T. Bruton, New generation BP solar saturn cell in production: the BBP7180 module, in: 19th Symposium PV Solarenergie, Kloster Banz (Staffelstein), 2004.
7. Metallization improvement on fabrication of interdigitated backside and double sided buried contact solar cells10.1016/j.solmat.2004.09.001 ↗
8. D. Kyeong, S.H. Cho, J.K. Lim, K. Lee, M.I. Hwang, W.J. Lee, E.C. Cho, Approaching 20%-efficient selective-emitter solar cells with copper front contacts on industrial 156mm Cz Si wafers, in: 27th European Photovoltaic Solar Energy Conference and Exhibition, Frankfurt, Germany, 2012, pp. 600–603.
9. T. Kim, J.K. Lim, H.N.R. Shin, D. Kyeong, J. Cho, M. Kim, J. Lee, H. Park, K. Lee, W.j. Lee, E.C. Cho, 21%-efficient PERL solar cells with plated front contacts on industrial 156mm p-type c-Si wafers, in: Fourth SiliconPV 2014, ’s-Hertogenbosch, The Netherlands, 2014.10.1016/j.egypro.2014.08.123 ↗
10. Metal contact structure for solar cell and method of manufacture in
11. P.J. Cousins, D.D. Smith, L. Hsin-Chiao, J. Manning, T.D. Dennis, A. Waldhauer, K.E. Wilson, G. Harley, W.P. Mulligan, Generation 3: improved performance at lower cost, in: Photovoltaic Specialists Conference (PVSC), 2010 35th IEEE, 2010, pp. 000275–000278.10.1109/PVSC.2010.5615850 ↗
12. P. Papet, J. Hermans, T. Söderström, M. Cucinelli, L. Andreetta, D. Bätzner, W. Frammelsberger, D. Lachenal, J. Meixenberger, B. Legradic, B. Strahm, G. Wahli, W. Brok, J. Geissbühler, A. Tomasi, C. Ballif, E. Vetter, S. Leu, Heterojunction solar cells with electroplated Ni/Cu front electrode, in: 28th European Photovoltaic Conference and Exhibition, Paris, France, 2013.
13. J..Bartsch, J..Benick, F..Feldmann, M..Glatthaar, S..Glunz, D..Harleb, M..Hermle, M..Kamp, A..Mondon, A..Richter, B..Steinhauser, C..Wittich, 21.8% efficient n-type solar cells with industrially feasible plated metallization, in: Fourth Silicon PV, ’s-Hertogenbosch, The Netherlands, 2014.10.1016/j.egypro.2014.08.116 ↗
14. B. Tjahjono, J.H. Guo, Z. Hameiri, L. Mai, A. Sugianto, S. Wang, S.R. Wenham, High efficiency solar cell structure through the use of laser doping, in: 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, pp. 966–969.
15. Record large-area p-type CZ production cell efficiency of 19.3% based on LDSE technology10.1109/JPHOTOV.2011.2164392 ↗
16. Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell10.1016/j.solmat.2011.07.030 ↗
17. K. Ji-Sun, L. Hyun-Woo, S. Jeong-Eun, L. Eun-Joo, C. Jun-Young, S. Ji-Myung, O. Dong-Joon, C. Kyeong-Yeon, K. Ji-hyun, S. Jae-keun, K. Ji-soo, L. Soo-Hong, L. Hae-Seok, B. Hallam, S.R. Wenham, Improved front side metallization for laser doped solar cells, in: Photovoltaic Specialists Conference (PVSC), 2011 37th IEEE, 2011, pp. 001091–001094.10.1109/PVSC.2011.6186142 ↗
18. Simplified interdigitated back contact solar cells10.1016/j.egypro.2012.07.107 ↗
19. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗
20. B.S. Tjahjono, M.J. Yang, C.Y. Lan, J. Ting, A. Sugianto, H. Ho, N. Kuepper, B. Beilby, T. Szpitalak, S.R. Wenham, 18.9% efficient laser doped selective emitter solar cell on industrial grade p-type Czochralski wafer, in: 25th European Photovoltaic Solar Energy Conference and Exhibition/Fifth World Conference on Photovoltaic Energy Conversion, Valencia, Spain, 2010, pp. 1396–1400.
21. A. Lennon, J. Yeo, P.H. Lu, Y. Sun, X. Wang, Z. Lu, Y. Li, V. Vais, Field-induced anodization for silicon solar cell passivation, in: Photovoltaic Specialists Conference (PVSC), 2013 IEEE 39th, 2013, pp. 1257–1259.10.1109/PVSC.2013.6744369 ↗
22. J. Tong, X. Wang, A. Lennon, Requirements to achieve field-induced anodisation for silicon surface passivation, in: Fourth Silicon PV, ’s-Hertogenbosch, The Netherlands, 2014.10.1016/j.egypro.2014.08.069 ↗
23. Light-induced anodisation of silicon for solar cell passivation10.1063/1.4829701 ↗
24. J. Cui, X. Wang, A.J. Lennon, Light-induced anodisation of aluminium for rear surface passivation of silicon solar cells, in: 28th European PV Solar Energy Conference and Exhibition, Paris, France, 2013.10.1063/1.4829701 ↗
25. B. Hallam, S.R. Wenham, C.M. Chong, M. Edwards, D. Jordan, P. Fath, Record large area p-type CZ production cell efficiency of 19.3% based on LDSE technology in: 37th IEEE Photovoltaics Specialists Conference, Seattle, Washington, 2011.10.1109/PVSC.2011.6185842 ↗
26. S.W. Glunz, J. Nekarda, H. Mäckel, A. Cuevas, Analyzing back contacts of silicon solar cells by Suns-Voc-measurement at high illumination densities, in: 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, pp. 849–853.
27. B.S. Tjahjono, Laser doped selective emitter solar cells, in: School of Photovoltaics and Renewable Energy Engineering, University of New South Wales, June 2010.
28. A. Letize, B. Lee, K. Crouse, D. Cullen, Light induced plating of silicon solar cell conductors using a novel low acid, high speed copper electroplating process, in: 28th European Photovoltaic and Solar Energy Conference, 2013.
29. T. Young, K. Hee, R. Egan, O. Wilkie, Y. Yao, A. Lennon, Design and characterisation of an adhesion strength tester for evaluating metal contacts on silicon solar cells, in: 40th IEEE Photovoltaics Specialist Conference, Denver, 2014.10.1109/PVSC.2014.6925450 ↗
30. Overcoming over-plating problems for PECVD SiNx passivated laser doped p-type multi-crystalline silicon solar cells10.1016/j.solmat.2011.12.003 ↗
31. Solar cell fill factors: general graph and empirical expressions10.1016/0038-1101(81)90062-9 ↗
32. X. Wang, M. Juhl, M. Abbott, Z. Hameiri, Y. Yao, A. Lennon, Use of QSSPC and QSSPL to monitor recombination processes in p-type silicon solar cells, in: Fourth SiliconPV 2014, ’s-Hertogenbosch, The Netherlands, 2014.10.1016/j.egypro.2014.08.110 ↗
33. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
34. Uniform plating of thin nickel layers for silicon solar cells10.1016/j.egypro.2013.07.350 ↗
35. T. Dullweber, S. Gatz, H. Hannebauer, T. Falcon, R. Hesse, J. Schmidt, R. Brendel, 19.4%-efficient large area rear-passivated screen-printed silicon solar cells, in: WIP, 2011.10.1002/pip.1198 ↗
36. Recombination saturation effects in silicon solar cells10.1109/16.310107 ↗
37. High-eficiency silicon solar cells: Si/SiO2, interface parameters and their impact on device performance10.1002/pip.4670020402 ↗
38. McIntosh · 2001 · 171
39. Y.B. Bai, J.E. Phillips, A.M. Barnett, Identifying the recombination losses that limit Voc in thin silicon solar cells by bifacial spectral response measurements, in: Photovoltaic Energy Conversion, 1994. Conference Record of the 24th. IEEE Photovoltaic Specialists Conference—1994, 1994 IEEE First World Conference on, 1994, vol. 1422, pp. 1429–1432.10.1109/WCPEC.1994.520217 ↗
40. Very low surface recombination velocity on p-type c-Si by high-rate plasma-deposited aluminum oxide10.1063/1.3250157 ↗
41. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
42. Advanced loss analysis method for silicon wafer solar cells10.1016/j.egypro.2011.06.131 ↗