journal article·2020-11Open access

Reactive ion etched, self-aligned, selective area poly-Si/SiO2 passivated contacts

David L. Young, Kejun Chen, San Theingi, Vincenzo LaSalvia, David Diercks, Harvey Guthrey, William Nemeth, Matthew Page, Pauls Stradins

Abstract

Abstract Front/back poly-Si/SiO2 contact devices suffer from low short-circuit current density, Jsc, due to parasitic optical absorption in the front poly-Si layer. Thin poly-Si (~20 nm) allows for high Jsc but is not compatible with screen-printed fire-through contacts. We therefore study the effects of post-deposition etching of a thick poly-Si (200 nm) front layer by reactive ion etching (RIE) using the metal grid lines as a self-aligned mask. We show that passivation is maintained in the device during RIE and that Jsc is increased by a gain in the blue quantum efficiency response. However, our specific etching parameters cause non-uniform etching of the poly-Si leading to premature loss of passivation without optimal gain in Jsc. Etched, unpassivated layers can be re-passivated with a H-containing dielectric layer leading to a gain in Jsc, open circuit voltage,Voc, Fill-Factor, FF, and efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Recombination Behavior of photolithographic-free back junction back contact solar cells with carrier-selective polysilicon junctions for both polarities
2. Low-cost plasma immersion ion implantation doping for interdigitated back passivated contact (IBPC) solar cells10.1016/j.solmat.2016.05.044 ↗
3. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
4. Effective impurity gettering by phosphorus- and boron- diffused polysilicon passivateing contacts for silicon solar cells10.1016/j.solmat.2017.11.004 ↗
5. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
6. The monoPoly technology platform: rapid implementation of passivating contacts in PERC/T production lines
7. Industrial, screen-printed double-side contacted polo cells
8. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
9. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions10.1016/j.egypro.2016.07.057 ↗
10. Analysis of silicon solar cells with poly-Si/SiOx carrier-selective base and Emitter contacts10.1109/JPHOTOV.2017.2775142 ↗
11. Silicon solar cell architecture with front selective and rear full Area ion-implanted passivating contacts10.1002/solr.201700040 ↗
12. Phosphorous-doped silicon carbide as front-side full-area passivating contact for double-side contacted c-Si solar cells
13. Passivating electron contact based on highly crystalline nanostructured silicon oxide layers for silicon solar cells10.1016/j.solmat.2016.06.040 ↗
14. Efficiency roadmap for evolutionary upgrades of PERC solar cells by TOPCon: impact of parasitic absorption
15. Role of polysilicon in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells10.1039/C9RA03560E ↗
16. Self-aligned, selective area poly-Si/SiO2 passivated contacts for enhanced photocurrent in front/back solar cells
17. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
18. Front/Back Poly-Si/SiO2 passivated contact device with Voc >720 mV
19. Series Resistance effects on solar cell measurements10.1016/0365-1789(63)90063-8 ↗
20. 2019
21. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions10.1016/j.egypro.2016.07.057 ↗