journal article·2019-09

Study on formation and characterization of CZTSSe-based absorber layer from a green solution based approach

Willi Kogler, Thomas Schnabel, Erik Ahlswede, Michael Powalla

Publisher page

Abstract

Abstract In this work, investigations on the localization and impairment of carbon residuals on device performance were performed. A green, ammonium thioglycolate (ATGL)-based solution process was used to fabricate the Cu2ZnSn(S,Se)4 (CZTSSe) absorber material. The resulting absorber triple layer structure was characterized in detail combining various characterizations methods to localize the carbon residuals from the utilized ink. Major differences were found between the upper and lower large-grained layer and the intermediate fine-grained layer. Furthermore, a formation mechanism for the absorber layer stack was derived from stopping the high temperature fabrication process and analyzing the respective samples. Investigations of the impact of the fine-grained intermediate layer on the solar cell parameters revealed that it does not contribute to the device performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Preparation and characterization of spray-deposited Cu2ZnSnS4 thin films10.1016/j.solmat.2009.01.011 ↗
2. Route toward high-efficiency single-phase Cu2ZnSn(S,Se)4, thin-film solar cells: model experiments and literature review10.1109/JPHOTOV.2011.2168811 ↗
3. Cu2ZnSnSe4 solar cell absorbers spin-coated from amine-containing ether solutions10.1016/j.solmat.2012.05.004 ↗
4. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
5. 9.0% efficient Cu2ZnSn(S,Se)4 solar cells from selenized nanoparticle inks10.1002/pip.2472 ↗
6. Influence of ligands on the formation of kesterite thin films for solar cells: a comparative study10.1002/cssc.201600063 ↗
7. Carbon concentration dependent grain growth of Cu2ZnSnS4 thin films10.1039/C4RA16447D ↗
8. Studies of the fine-grain sub-layer in the printed CZTSSe photovoltaic devices10.1039/c4tc00391h ↗
9. Metal sulfide precursor aqueous solutions for fabrication of Cu2ZnSn(S,Se)4 thin film solar cells10.1039/C4GC01828A ↗
10. On the interface between kesterite absorber and Mo back contact and its impact on solution-processed thin-film solar cells10.1016/j.solmat.2016.09.029 ↗
11. Wurtzite Cu2ZnSnS4 nanocrystals: a novel quaternary semiconductor10.1039/c0cc05064d ↗
12. Kesterite/wurtzite Cu2ZnSnS4 nanocrystals: synthesis and characterization for PV applications10.1109/IRSEC.2016.7983993 ↗
13. Investigation into the selenization mechanisms of wurtzite CZTS nanorods10.1021/acsami.7b18711 ↗
14. Wurtzite-derived polytypes of kesterite and stannite quaternary chalcogenide semiconductors10.1103/PhysRevB.82.195203 ↗
15. Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon10.1103/PhysRevB.64.075414 ↗
16. Cu2Zn1–xCdx Sn(Se1–ySy)4 solid solutions as absorber materials for solar cells10.1002/pssa.200776839 ↗
17. Photoluminescence and Raman study of Cu2ZnSn(SexS1 − x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
18. Molecular structure of vapor-deposited amorphous selenium10.1063/1.4962315 ↗
19. Real-time observation of Cu2ZnSn(S,Se)4 solar cell absorber layer formation from nanoparticle precursors10.1039/c3cp53373e ↗
20. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
21. CdS/Low-band-gap kesterite thin-film solar cell absorber heterojunction: energy level alignment and dominant recombinatin process10.1021/acsaem.7b00071 ↗