Study of the fundamental phase formation mechanism of sol-gel sulfurized Cu2ZnSnS4 thin films using in situ Raman spectroscopy
Source abstract
Abstract
Abstract In the current work, the results of the in situ Raman monitoring of phase formation of copper zinc tin sulfide (Cu2ZnSnS4, CZTS) material from room temperature up to 350 °C are presented. Cu-Zn-Sn oxide precursors were sulfurized for up to 180 min using a 100 ppm H2S+4%H2+N2 gas mixture (by volume). The results showed that CZTS phase formed in about 30 min via a reaction between the metal oxide precursor film and the H2S-H2 gas mixture at intermediate temperature of 350 °C and remained stable upon extended exposure. In comparison, at lower temperature such as 170 °C, the oxide precursor film had to be reduced first (e.g., in 4% H2+N2 forming gas) and then the CZTS phase emerged. However, continued sulfurization at lower temperature (e.g., 170 °C) led to the disintegration of CZTS and the formation of CuS impurity, which remains stable upon cooling the sample down to room temperature. The correlation between the in situ Raman monitoring data and the information from other ex situ characterization techniques provided useful information regarding the reaction pathways leading to the formation of sol-gel based CZTS thin films as well as other related phases under different sulfurization conditions. The outcomes of the current study also set the directions for optimizing the CZTS film structure and stoichiometry toward developing high performance CZTS solar cells in future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Ternary and quaternary metal chalcogenide nanocrystals: synthesis, properties and applications10.1039/c3tc30273c ↗
2. Multi-stage evaporation of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.033 ↗
3. Deposition of Cu2ZnSnS4 thin films by vacuum thermal evaporation from single quaternary compound source10.1016/j.matlet.2012.01.018 ↗
4. Characterization of a CZTS thin film solar cell grown by sputtering method10.1016/j.solener.2013.11.035 ↗
5. Fabrication of Cu2ZnSnS4 thin film solar cells by sulfurization of electrodeposited stacked binary Cu–Zn and Cu–Sn alloy layers10.1016/j.matlet.2015.04.101 ↗
6. Effect of deposition temperature on the structural and electrical properties of spray deposited kesterite (Cu2ZnSnS4) films10.1016/j.solener.2015.09.027 ↗
7. Preparation of Cu2ZnSnS4 thin films by sulfurizing sol–gel deposited precursors10.1016/j.solmat.2007.04.012 ↗
8. A nontoxic solvent based sol–gel Cu2ZnSnS4 thin film for high efficiency and scalable low-cost photovoltaic cells10.1039/C5TA02833G ↗
9. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel route10.1039/C3TA13533K ↗
10. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
11. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
12. Photoluminescence study of defect clusters in Cu2ZnSnS4 polycrystals10.1016/j.cap.2013.12.029 ↗
13. The influence of hydrogen in the incorporation of Zn during the growth of Cu2ZnSnS4 thin films10.1016/j.solmat.2011.08.008 ↗
14. Phase identification and control of thin films deposited by co-evaporation of elemental Cu, Zn, Sn, and Se10.1116/1.4732529 ↗
15. Detecting ZnSe secondary phase in Cu2ZnSnSe4 by room temperature photoluminescence10.1063/1.4808384 ↗
16. In-situ X-ray diffraction analysis of the recrystallization process in Cu2ZnSnS4 nanoparticles synthesised by hot-injection10.1016/j.tsf.2014.10.077 ↗
17. In-situ investigation of the structural phase transition in kesterite10.1002/pssa.200881214 ↗
18. In-situ XRD on formation reactions of Cu2ZnSnS4 thin films10.1002/pssc.200881231 ↗
19. A low-temperature order-disorder transition in Cu2ZnSnS4 thin films10.1063/1.4863685 ↗
20. Temperature-dependent study of the Raman A mode of Cu2ZnSnS4 thin films10.1002/pssb.201046477 ↗
21. In Situ Raman Monitoring of Cu2ZnSnS4 Oxidation and Related Decomposition at Elevated Temperatures10.1109/JPHOTOV.2016.2542479 ↗
22. Understanding the phase formation kinetics of nano-crystalline kesterite deposited on mesoscopic scaffolds via in situ multi-wavelength Raman-monitored annealing10.1039/C6CP05759D ↗
23. Formation of sol-gel based Cu2ZnSnS4 thin films using ppm-level hydrogen sulfide10.1016/j.tsf.2017.01.054 ↗
24. Formation of Cu-Rich and Sn-Poor CZTSSe via Cu3Sn(S,Se)4-ZnS Solid-Solution as the Intermediate10.1021/cm502338q ↗
25. K. Ito, Copper Zinc Tin Sulfide-Based Thin-Film Solar Cells, 2015, p. 413.10.1002/9781118437865 ↗
26. Effects of diethanolamine on sol-gel-processed Cu2ZnSnS4 photovoltaic absorber thin films10.1016/j.materresbull.2013.10.043 ↗
27. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
28. A simple aqueous precursor solution processing of earth-abundant Cu2SnS3 absorbers for thin-film solar cells10.1021/acsami.6b02167 ↗
29. S. van Duren, Y. Ren, J. Scragg, J. Just, T. Unold, Raman spectroscopy study on in-situ monitoring of Cu2ZnSnS4 synthesis, in: Proceedings of the 2015 IEEE 42nd Photovolt. Spec. Conf., 2015, pp. 1–3.10.1109/PVSC.2015.7355638 ↗
30. Raman spectrum of cubic ZnS10.1103/PhysRev.182.838 ↗
31. XRD Raman analysis and optical properties of CuS nanostructured film10.1016/j.ijleo.2016.04.019 ↗
32. Influence of H2S concentration on the properties of Cu2ZnSnS4 thin films and solar cells prepared by sol–gel sulfurization10.1016/j.solmat.2011.05.050 ↗
33. Single step preparation of quaternary Cu2ZnSnSe4 thin films by RF magnetron sputtering from binary chalcogenide targets10.1016/j.jpcs.2007.05.022 ↗
34. M. Theses, F.A. Weirich, A Study of the Reduction of Zinc Oxide by Hydrogen and Methane, 1926.
35. Growth and properties of Cu2ZnSnS4 thin films prepared by multiple metallic layer stacks as a function of sulfurization time10.1007/s10854-017-6974-7 ↗
36. Growth evolution and phase transition from chalcocite to digenite in nanocrystalline copper sulfide: morphological, optical and electrical properties10.3762/bjnano.5.166 ↗