Soiling of building envelope surfaces and its effect on solar reflectance – Part III: Interlaboratory study of an accelerated aging method for roofing materials
Source abstract
Abstract
Abstract A laboratory method to simulate natural exposure of roofing materials has been reported in a companion article. In the current article, we describe the results of an international, nine-participant interlaboratory study (ILS) conducted in accordance with ASTM Standard E691-09 to establish the precision and reproducibility of this protocol. The accelerated soiling and weathering method was applied four times by each laboratory to replicate coupons of 12 products representing a wide variety of roofing categories (single-ply membrane, factory-applied coating (on metal), bare metal, field-applied coating, asphalt shingle, modified-bitumen cap sheet, clay tile, and concrete tile). Participants reported initial and laboratory-aged values of solar reflectance and thermal emittance. Measured solar reflectances were consistent within and across eight of the nine participating laboratories. Measured thermal emittances reported by six participants exhibited comparable consistency. For solar reflectance, the accelerated aging method is both repeatable and reproducible within an acceptable range of standard deviations: the repeatability standard deviation sr ranged from 0.008 to 0.015 (relative standard deviation of 1.2–2.1%) and the reproducibility standard deviation sR ranged from 0.022 to 0.036 (relative standard deviation of 3.2–5.8%). The ILS confirmed that the accelerated aging method can be reproduced by multiple independent laboratories with acceptable precision. This study supports the adoption of the accelerated aging practice to speed the evaluation and performance rating of new cool roofing materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building Energy and Comfort Optimization · Urban Heat Island Mitigation · Facilities and Workplace Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Inclusion of cool roofs in nonresidential Title 24 prescriptive requirements10.1016/S0301-4215(03)00206-4 ↗
2. Cool communities: strategies for heat island mitigation and smog reduction10.1016/S0378-7788(97)00063-7 ↗
3. The long-term effect of increasing the albedo of urban areas10.1088/1748-9326/7/2/024004 ↗
4. IEA, CO2 emissions from fuel combustion, Highlights, International Energy Agency OECD/IEA, Paris, France, 2012. 〈http://www.iea.org/publications/freepublications/publication/CO2emissionfromfuelcombustionHIGHLIGHTSMarch2013.pdf〉.
5. Cool products for building envelope – Part II: experimental and numerical evaluation of thermal performances10.1016/j.solener.2014.02.035 ↗
6. Cool products for building envelope – Part I: development and lab scale testing10.1016/j.solener.2014.03.029 ↗
7. Soiling of building envelope surfaces and its effect on solar reflectance – Part II: development of an accelerated aging method for roofing materials10.1016/j.solmat.2013.11.028 ↗
8. Soiling of building envelope surfaces and its effect on solar reflectance – Part I: analysis of roofing product databases10.1016/j.solmat.2011.08.002 ↗
9. Weathering of roofing materials – an overview10.1016/j.conbuildmat.2006.10.015 ↗
10. Nanobased coatings with improved NIR reflecting properties for building envelope materials: development and natural aging effect measurements10.1016/j.cemconcomp.2012.10.002 ↗
11. Effect of ageing on solar spectral reflectance of roofing membranes: natural exposure in Roma and Milano and the impact on the energy needs of commercial buildings
12. ASTM, ASTM D7897-15: Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance, American Society for Testing and Materials, West Conshohocken, PA, 2015. 〈http://www.astm.org/Standards/D7897.htm〉.
13. CRRC, CRRC Product Rating Program CRRC-1, October, Cool Roof Rating Council, Oakland, CA, 2015. 〈http://coolroofs.org/documents/CRRC-1_Program_Manual_-_2015-06-19_Final.pdf〉.
14. ASTM, ASTM E691-09: Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method, American Society for Testing and Materials, West Conshohocken, PA, 2009. 〈http://www.astm.org/DATABASE.CART/HISTORICAL/E691-09.htm〉.
15. ASTM, ASTM E691-14: Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method, American Society for Testing and Materials, West Conshohocken, PA, 2014. 〈http://www.astm.org/Standards/E691.htm〉.
16. ASTM, ASTM G151-10: Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources, American Society for Testing and Materials, West Conshohocken, PA, 2010. 〈http://www.astm.org/Standards/G151.htm〉
17. ASTM, ASTM G154-12a: Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials, American Society for Testing and Materials, West Conshohocken, PA, 2012. 〈http://www.astm.org/Standards/G154.htm〉.
18. ASTM, ASTM C1549-09: Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer, American Society for Testing and Materials, West Conshohocken, PA, 2009. 〈http://www.astm.org/Standards/C1549.htm〉.
19. ASTM, ASTM C1371-04a(2010)e1: Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers, American Society for Testing and Materials, West Conshohocken, PA, 2010. 〈http://www.astm.org/Standards/C1371.htm〉.
20. ASTM, ASTM E903-12: Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres. American Society for Testing and Materials, West Conshohocken, PA, 2012. 〈http://www.astm.org/Standards/E903.htm〉.
21. C. Moore, Model AE1 emittance measurements using a port adapter, Model AE-ADP. Technical note 11-2. Devices and Services, Dallas, TX. 〈http://www.devicesandservices.com/TechNotes/TN11-2.pdf〉.
22. A.T. Riga, G.H. Patterson, Eds., ASTM, STP 1326, Oxidative Behavior of Materials by Thermal Analytical Techniques, American Society for Testing and Materials, 1997.10.1520/STP1326-EB ↗