Properties of purified direct steam grown silicon thermal oxides
Source abstract
Abstract
Thermal silicon oxides are known to very effectively passivate silicon surfaces. Choosing a water vapor ambient instead of a dry oxygen atmosphere increases the oxidation rate by about one order of magnitude and considerably reduces process time and costs. State of the art pyrox systems produce steam by pyrolysis of hydrogen and oxygen gas. A new approach is the purification of vaporized deionized (DI) water. In this work we present a direct comparison of both steam generation systems, which are connected to the same quartz tube of an industrial high quality tube furnace. The higher steam saturation of the direct steam process enhances the growth rate by about 20% compared to a pyrolytic steam based process. On low-resistivity p-type substrates, excellent surface recombination velocities of around 25 cm/s are found for both systems after a forming gas anneal. Detailed characterization shows similar physical properties of the oxide layers grown by either steam from pyrolysis or purified steam. Moreover, thermal oxide rear surface passivated silicon solar cells show similar high efficiencies exceeding 18.0% irrespective of the applied steam generation technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. High efficiency silicon solar cells: Si/SiO2 interface parameters and their impact on device performance10.1002/pip.4670020402 ↗
2. Very low bulk and surface recombination in oxidised silicon wafers10.1088/0268-1242/17/1/306 ↗
3. L. Gautero, M. Hofmann, J. Rentsch, A. Lemke, S. Mack, J. Seiffe, J.-F. Nekarda, D. Biro, A. Wolf, B. Bitnar, J.-M. Sallese, R. Preu, All-screen-printed 120-μm-thin large-area silicon solar cells applying dielectric rear passivation and laser-fired contacts reaching 18% efficiency, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, Philadelphia, USA, 2009, pp. 1888–1893.10.1109/PVSC.2009.5411562 ↗
4. S. Mack, U. Jäger, G. Kästner, E.A. Wotke, U. Belledin, A. Wolf, R. Preu, D. Biro, Towards 19% efficient industrial PERC devices using simultaneous front emitter and rear surface passivation by thermal oxidation, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, USA, 2010, pp. 34–38.10.1109/PVSC.2010.5614048 ↗
5. A. Wolf, A. Walczak, S. Mack, E.A. Wotke, A. Lemke, C. Bertram, U. Belledin, D. Biro, R. Preu, The SiNTO process: utilizing a SiNx anti-reflection layer for emitter masking during thermal oxidation, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, Philadelphia, USA, 2009, pp. 534–539.10.1109/PVSC.2009.5411627 ↗
6. M.A. Green, Silicon solar cells: advanced principles and practice, Sydney, Australia: Centre for Photovoltaic Devices and Systems UNSW, 1995.
7. Theory and experiment on the back side reflectance of silicon wafer solar cells10.1002/pip.769 ↗
8. Surface passivation of silicon solar cells using plasma-enhanced chemical-vapour-deposited SiN films and thin thermal SiO2/plasma SiN stacks10.1088/0268-1242/16/3/308 ↗
9. Comprehensive study of rapid, low-cost silicon surface passivation technologies10.1109/16.841230 ↗
10. J.Y. Lee, J. Dicker, S. Rein, S.W. Glunz, Investigation of various surface passivation layers using oxide/nitride stacks of silicon solar cells, in: Proceedings of the Third World Conference on Photovoltaic Energy Conversion, Osaka, Japan, 2003, pp. 1069–1072.
11. O. Schultz, M. Hofmann, S.W. Glunz, G.P. Willeke, Silicon oxide/silicon nitride stack systems for 20% efficient silicon solar cells, in: Proceedings of the 31st IEEE Photovoltaic Specialists Conference, Orlando, Florida, USA, 2005, pp. 872–876.10.1109/PVSC.2005.1488271 ↗
12. Oxidation for crystalline silicon solar cells exceeding 19% efficiency applying industrially feasible process technology10.1002/pip.814 ↗
13. S. Mack, A. Wolf, E.A. Wotke, A. Lemke, B. Holzinger, T. Dimitrova, D. Biro, R. Preu, Impact of solar cell manufacturing processes on thermal oxide-passivated silicon surfaces, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1574–1579.
14. General relationship for the thermal oxidation of silicon10.1063/1.1713945 ↗
15. Thermal oxidation of Si
16. Nicollian · 1982
17. Effect of process parameters on stress development in two-dimensional oxidation10.1063/1.341430 ↗
18. J. Spiegelman, R.D. Blethen, Method of Producing High Purity Steam, PCT/US2006/035790, USA, 2006.
19. D. Biro, S. Mack, A. Wolf, A. Lemke, U. Belledin, D. Erath, B. Holzinger, E.-A. Wotke, M. Hofmann, L. Gautero, S. Nold, J. Rentsch, R. Preu, Thermal oxidation as a key technology for high efficiency screen printed industrial silicon solar cells, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, Philadelphia, USA, 2009, pp. 1594–1599.10.1109/PVSC.2009.5411381 ↗
20. J. Benick, K. Zimmermann, J. Spiegelman, M. Hermle, S.W. Glunz Rear side passivation of PERC-type solar cells by wet oxides grown from purified steam, Prog. Photovolt: Res. Appl., in press, doi:10.1002/pip.1020.10.1002/pip.1020 ↗
21. S. Mack, D. Biro, A. Wolf, B. Thaidigsmann, A. Walczak, J.J. Spiegelman, R. Preu, Purified steam for industrial thermal oxidation processes, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, USA, 2010, pp. 920–923.10.1109/PVSC.2010.5614171 ↗
22. D. Biro, U. Belledin, A. Weil, M. Zimmer, A. Grohe, S. Rein, J. Rentsch, R. Preu, PV-Tec: retrospection to the three years of operation of a production oriented research platform, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1901–1905.
23. S. Mack, A. Lemke, A. Wolf, B. Holzinger, M. Zimmer, D. Biro, R. Preu, Control and optimization of the thermal processes for industrial solar cell fabrication, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, Philadelphia, Pennsylvania, USA, 2009, pp. 1024–1028.10.1109/PVSC.2009.5411196 ↗
24. R.A. Sinton, A. Cuevas, M. Stuckings, Quasi-steady-state photoconductance, a new method for solar cell material and device characterization, in: Proceedings of the 25th IEEE Photovoltaic Specialists Conference, Washington DC, USA, 1996, pp. 457–460.10.1109/PVSC.1996.564042 ↗
25. Dimensionless solution of the equation describing the effect of surface recombination on carrier decay in semiconductors10.1063/1.357521 ↗
26. General parameterization of Auger recombination in crystalline silicon10.1063/1.1432476 ↗
27. Schroder · 1990
28. Rear surface conditioning and passivation for locally contacted crystalline silicon solar cells
29. Laser-fired rear contacts for crystalline silicon solar cells10.1002/pip.422 ↗
30. Infrared spectroscopic studies of SiOx films produced by plasma enhanced chemical vapor deposition10.1116/1.573833 ↗
31. Infrared spectroscopic analysis of the Si/SiO2 interface structure of thermally oxidized silicon10.1063/1.372017 ↗
32. Smith · 1988
33. Calculation of surface generation and recombination velocities at the Si–SiO2 interface10.1063/1.335562 ↗
34. Technology and kinetics of SiO2 growth
35. Experimental evidence of parasitic shunting in silicon nitride rear surface passivated solar cells10.1002/pip.420 ↗
36. Structure and transformation of the metastable boron- and oxygen-related defect center in crystalline silicon10.1103/PhysRevB.69.024107 ↗
37. P.A. Basore, Extended spectral analysis of internal quantum efficiency, in: Proceedings of the 23rd IEEE Photovoltaic Specialists Conference, Louisville, Kentucky, USA, 1993, pp. 147–152.