How to improve the performance of dye-sensitized solar cell modules by light collection
Source abstract
Abstract
Abstract Low cost reflectors were applied to dye-sensitized solar cell modules to reduce the energy losses caused by the inactive areas occupied by sealing materials and metal fingers, and significant improvement of overall efficiency was achieved. An improved model was used to simulate the modules, and the optimized geometry parameters of the modules were obtained. After applying the reflectors, wider silver fingers, and smaller cells were recommended for large area modules, and the influence of the width of sealing material was reduced. Simulation results show that the maximum total area efficiency of 11.22% for large area modules could be achieved based on the small cell with efficiency of 11.4% and reflectors with reflectivity of 0.9. The reflectors can be utilized in any kind of solar cell with inactive areas. The model can also be applied to other kinds of solar cell module with any geometry characters, and the optimized parameters can be obtained easily for any design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · solar cell performance optimization · Photovoltaic Systems and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Light and energy—dye solar cells for the 21st century10.1016/j.jphotochem.2004.01.027 ↗
3. Solar cell efficiency tables (version 37)10.1002/pip.1088 ↗
4. How to design dye-sensitized solar cell modules10.1016/j.solmat.2011.02.035 ↗
5. Theoretical modeling of the series resistance effect on dye-sensitized solar cell performance10.1063/1.3270532 ↗
6. New interdigital design for large area dye solar modules using a lead-free glass frit sealing10.1002/pip.700 ↗
7. A glass frit-sealed dye solar cell module with integrated series connections10.1016/j.solmat.2005.09.003 ↗
8. Design of DSC panel with efficiency more than 6%10.1016/j.solmat.2004.10.001 ↗
9. Reproducible manufacturing of dye-sensitized solar cells on a semi-automated baseline10.1002/pip.481 ↗
10. Design methods for large scale dye-sensitized solar modules and the progress of stability research10.1016/j.rser.2010.06.019 ↗
11. Dye-sensitized photovoltaic module with conversion efficiency of 8.4%10.1143/APEX.2.082202 ↗
12. Efficient dye-sensitized solar cell sub-modules10.1016/j.cap.2009.11.004 ↗
13. Degradation analysis of dye-sensitized solar cell module after long-term stability test under outdoor working condition10.1016/j.solmat.2008.10.022 ↗
14. Effect of electrode geometry on the photovoltaic performance of dye-sensitized solar cells10.1016/j.solmat.2009.03.002 ↗
15. Improvement of efficiency of dye-sensitized solar cells based on analysis of equivalent circuit, J10.1016/j.jphotochem.2006.04.030 ↗
16. Hybrid tandem solar cell for concurrently converting light and heat energy with utilization of full solar spectrum10.1016/j.jpowsour.2010.05.033 ↗
17. Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%10.1016/j.tsf.2007.05.090 ↗
18. Dye-sensitized solar cells with conversion efficiency of 11.1%10.1143/JJAP.45.L638 ↗
19. Electrons in nanostructured TiO2 solar cells: transport, recombination and photovoltaic properties10.1016/j.ccr.2004.03.015 ↗
20. Dynamic response of dye-sensitized nanocrystalline solar cells: characterization by intensity-modulated photocurrent spectroscopy10.1021/jp972466i ↗
21. van de Lagemaat · J. Phys. Chem. B · 2000 · 104 · 204410.1021/jp993172v ↗
22. Solar cell efficiency tables (version 15)10.1002/(SICI)1099-159X(200001/02)8:1<187::AID-PIP313>3.0.CO;2-1 ↗
23. An efficient light-harvesting ruthenium dye for solar cell application10.1016/j.dyepig.2009.06.017 ↗
24. Electrolyte effects on photoelectron injection and recombination dynamics in dye-sensitized solar cells, J10.1016/j.jphotochem.2010.05.004 ↗
25. A numerical model for charge transport and recombination in dye-sensitized solar cells10.1021/jp056493h ↗
26. Charge recombination in dye-sensitized nanocrystalline TiO2 solar cells10.1021/jp962377q ↗
27. A series of LiI/acetamide phase transition electrolytes and their applications in dye-sensitized solar cells10.1016/j.electacta.2009.09.050 ↗
28. Application of carbon counterelectrode on CdS quantum dot-sensitized solar cells (QDSSCs)10.1016/j.elecom.2009.12.032 ↗
29. A 5% efficient photoelectrochemical solar cell based on nanostructured ZnO electrodes10.1016/S0927-0248(01)00110-6 ↗
30. Theoretical models for the action spectrum and the current–voltage characteristics of microporous semiconductor films in photoelectrochemical cells10.1021/j100072a023 ↗
31. Solid-state and flexible dye-sensitized TiO2 solar cells: a study by electrochemical impedance spectroscopy10.1021/jp014456u ↗