journal article·2021-01Open access

The potential of cast silicon

Martin C. Schubert, Florian Schindler, Jan Benick, Stephan Riepe, Patricia Krenckel, Armin Richter, Ralph Müller, Benjamin Hammann, Sebastian Nold

Abstract

Abstract The interest in cast mono silicon is increasing due to its lower energy consumption and resulting smaller carbon footprint, lower oxygen content and resulting less oxygen-related defects as well as easy scalability to large wafer formats like 210 × 210 mm2 full square. As a cast silicon alternative to high performance multicrystalline (hpm) silicon, which rapidly lost market share, we analyze the cell efficiency potential of cast mono silicon in a TOPCon cell structure. We show how the absence of grain boundaries and the exceptional tolerance of the material quality towards high temperature processing enable this significant increase of the cell efficiency potential compared to hpm silicon. The very effective suppression of crystal defects by the Seed Manipulation for ARtificially controlled defect Technique (SMART) results in a very low lateral variation of the high material quality. We present certified cell efficiencies of 23.3% on n-type material crystallized in our labs, which demonstrates the high efficiency potential even for our lab-type G2 crystallization. An additional crystallization experiment for 210 × 210 mm2 wafers demonstrates that SMART mono is compatible to large wafer sizes. A significant difference of the crystallization costs for Cz and cast mono crystallization as a function of electricity costs is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Fischer · 2019
2. Development of high-performance multicrystalline silicon for photovoltaic industry10.1002/pip.2437 ↗
3. Casting single crystal silicon: novel defect profiles from BP solar's mono2 TM wafers10.4028/www.scientific.net/SSP.131-133.1 ↗
4. Seed manipulation for artificially controlled defect technique in new growth method for quasi-monocrystalline Si ingot based on casting10.7567/APEX.8.105501 ↗
5. Advantage in solar cell efficiency of high-quality seed cast mono Si ingot10.7567/APEX.8.062301 ↗
6. Towards high-efficiency industrial p-type mono-like Si PERC solar cells10.1016/j.solmat.2019.110202 ↗
7. Control of heat transfer in continuous-feeding Czochralski-silicon crystal growth with a water-cooled jacket10.1016/j.jcrysgro.2016.10.041 ↗
8. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
9. Efficiency limiting bulk recombination in multicrystalline silicon solar cells10.1016/j.solmat.2011.11.047 ↗
10. Higher quality mono-like cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
11. Numerical simulation of stresses and dislocations in quasi-mono silicon10.1016/j.jcrysgro.2016.06.007 ↗
12. Control of grain boundary propagation in mono-like Si: utilization of functional grain boundaries10.7567/APEX.6.025505 ↗
13. Determination of bulk lifetime and surface recombination velocity of silicon ingots from dynamic photoluminescence10.1109/JPHOTOV.2013.2264622 ↗
14. Harmonically modulated luminescence: bridging gaps in carrier lifetime metrology across the PV processing chain10.1109/JPHOTOV.2014.2362304 ↗
15. Towards the efficiency limits of multicrystalline silicon solar cells10.1016/j.solmat.2018.05.006 ↗
16. Optimized multicrystalline silicon for solar cells enabling conversion efficiencies of 22%10.1016/j.solmat.2017.06.005 ↗
17. Wafer thickness optimization for silicon solar cells of heterogeneous material quality10.1002/pssr.201308090 ↗
18. Minority carrier lifetime imaging of silicon wafers calibrated by quasi-steady-state photoluminescence10.1016/j.solmat.2010.12.016 ↗
19. The concept of skins for silicon solar cell modeling10.1016/j.solmat.2017.05.012 ↗
20. Optoelectronic properties of Black-Silicon generated through inductively coupled plasma (ICP) processing for crystalline silicon solar cells10.1016/j.apsusc.2015.11.241 ↗
21. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
22. Green · Progress in Photovoltaics: Research and Applications · 2020 · 28 · 62910.1002/pip.3303 ↗