journal article·2019-09

Photoactive layer crosslinking in all-polymer solar cells: Stabilized morphology and enhanced thermal-stability

Wenhuai Feng, Zhenkun Lin, Jianyu Cui, Wei Lv, Wen Wang, Qidan Ling

Publisher page

Abstract

Abstract In recent years, a strong growth in power conversion efficiency of all-polymer solar cells (up to 11.0%) has been realized through extensive material and device research. For practical application, high intrinsic thermal stability of the photoactive layer is a crucial requirement for long lifetimes. In this study, two new vinyl-functionalized monomers (TPD-V, NDI-V) were synthesized as the third monomer to produce two new series of cross-linkable benzodithiophene (BDT)-thieno[3,4-c]pyrrole-4,6-dione (TPD)-based polymer donors and naphthalenediimide (NDI)-based polymer acceptors by random copolymerization. By synthetically tuning the molar content of vinyl units, the crosslinked properties of the polymers were explored. It is found that these crosslinkable polymers with small molar content of vinyl unit can be mostly crosslinked upon long-term heating. Meanwhile, by employing crosslinking of PA/PD blend, all-PSCs were fabricated and the thermal-stability were studied. As a result, the all-PSCs based both crosslinkable polymer donor PBDT-TPD-8 and acceptor PNDI-T-5 retained 86% of its highest PCE (106% of its initial PCE) without obvious burn-in efficiency loss under 24 h of continuous accelerated heating (150 °C), while the reference devices based non-crosslinkable PBDT-TPD-0/PNDI-T-0 only retained 40% of its highest PCE (51% of its initial PCE). The results demonstrate photoactive layer crosslinking can stabilize morphology under long term thermal stress leading to excellent thermal-stability of the devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. All-polymer solar cells: recent progress, challenges, and prospects
2. 7.7% Efficient all-polymer solar cells10.1002/adma.201501604 ↗
3. Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells10.1038/ncomms9242 ↗
4. From fullerene-polymer to all-polymer solar cells: the Importance of molecular packing, orientation, and morphology control10.1021/acs.accounts.6b00347 ↗
5. A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells10.1021/ja071760d ↗
6. n-Type semiconducting naphthalene diimide-perylene diimide copolymers: controlling crystallinity, blend morphology, and compatibility toward high-performance all-polymer solar cells10.1021/ja513260w ↗
7. Improved performance of all-polymer solar cells enabled by naphthodiperylenetetraimide-based polymer acceptor10.1002/adma.201700309 ↗
8. A Vinylene-bridged perylenediimide-based polymeric acceptor enabling efficient all-polymer solar cells processed under ambient conditions10.1002/adma.201602387 ↗
9. Polymer acceptor based on B←N units with enhanced electron mobility for efficient all-polymer solar cells10.1002/anie.201601305 ↗
10. An electron-deficient building block based on the B←N Unit: an electron acceptor for all-polymer solar cells10.1002/anie.201508482 ↗
11. Constructing a strongly absorbing low-bandgap polymer acceptor for high-performance all-polymer solar Cells10.1002/anie.201707678 ↗
12. Ternary nonfullerene polymer solar cells with efficiency >13.7% by integrating the advantages of the materials and two binary cells10.1039/C8EE01107A ↗
13. Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5%10.1039/C8EE00215K ↗
14. Dye-incorporated polynaphthalenediimide acceptor for additive-free high-performance all-polymer solar cells10.1002/anie.201800035 ↗
15. All-polymer solar cells based on absorption-complementary polymer donor and acceptor with high power conversion efficiency of 8.27%10.1002/adma.201504629 ↗
16. Binary additives synergistically boost the efficiency of all-polymer solar cells up to 3.45%10.1039/C3EE43041C ↗
17. All-polymer solar cells based on a conjugated polymer containing siloxane-functionalized side chains with efficiency over 10%10.1002/adma.201703906 ↗
18. Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with power conversion efficiency over 9%10.1039/C7EE00619E ↗
19. Side-chain modification of polyethylene glycol on conjugated polymers for ternary blend all-polymer solar cells with efficiency up to 9.27%10.1007/s11426-017-9188-7 ↗
20. 11.2% All-polymer tandem solar cells with simultaneously improved efficiency and stability
21. Designing ternary blend all-polymer solar cells with an efficiency of over 10% and a fill factor of 78%10.1016/j.nanoen.2018.06.081 ↗
22. 8.0% efficient all-polymer solar cells with high photovoltage of 1.1 V and internal quantum efficiency near unity10.1002/aenm.201700908 ↗
23. High-performance all-polymer solar cells based on fluorinated naphthalene diimide acceptor polymers with fine-tuned crystallinity and enhanced dielectric constants10.1016/j.nanoen.2018.01.012 ↗
24. High-performance and stable all-polymer solar cells using donor and acceptor polymers with complementary absorption10.1002/aenm.201770071 ↗
25. Comparative study of thermal stability, morphology, and performance of all-polymer, fullerene-polymer, and ternary blend solar cells based on the same polymer donor10.1021/acs.macromol.7b00834 ↗
26. Impact of highly-crystalline, isoindigo-based small-molecular additives for enhancing performance of all-polymer solar cells10.1039/C7TA06939A ↗
27. Efficient and thermally stable all-polymer solar cells based on a fluorinated wide bandgap polymer donor with high crystallinity10.1039/C8TA05376F ↗
28. Morphology optimization via side chain engineering enables all-polymer solar cells with excellent fill factor and stability10.1021/jacs.8b05038 ↗
29. Crosslinked semiconductor polymers for photovoltaic applications10.1002/aenm.201700306 ↗
30. Organic photovoltaics: crosslinking for optimal morphology and stability10.1016/j.mattod.2015.04.001 ↗
31. Morphology stabilization strategies for small-molecule bulk heterojunction photovoltaics10.1039/C7TA05405J ↗
32. Thermally stable bulk heterojunction solar cells based on cross-linkable acrylate-functionalized polythiophene diblock copolymers10.1021/ma3020905 ↗
33. Solvent-resistant organic transistors and thermally-stable organic photovoltaics based on crosslinkable conjugated polymers10.1021/cm203058p ↗
34. Effect of side-chain engineering of bithienylbenzodithiophene-alt-fluorobenzotriazole-based copolymers on the thermal stability and photovoltaic performance of polymer solar cells10.1021/acs.macromol.8b01036 ↗
35. Boosting the performance of non-fullerene organic solar cells via cross-linked donor polymers design10.1021/acs.macromol.8b02526 ↗
36. UV-cross-linkable donor-acceptor polymers bearing a photostable conjugated backbone for efficient and stable organic photovoltaics10.1021/acsami.8b11506 ↗
37. Azido-functionalized thiophene as a versatile building block to cross-link low-bandgap polymers10.1021/acs.macromol.5b02659 ↗
38. Initiator-free crosslinking of oxetane functionalized low bandgap polymers: an approach towards stablized bulk heterojunction solar cells10.1039/C6TC03214A ↗
39. The effect of photocrosslinkable groups on thermal stability of bulk heterojunction solar cells based on donor-acceptor-conjugated polymers10.1002/pola.26828 ↗
40. Naphthalene diimide-based random terpolymer for efficient all-polymer solar cells with high open circuit voltage10.1016/j.dyepig.2017.07.007 ↗
41. Isoindigo-3,4-difluorothiophene polymer acceptors yield "All-Polymer" bulk-heterojunction solar Cells with over 7% efficiency10.1002/anie.201709509 ↗
42. Highly efficient and highly stable terpolymer-based all-polymer solar cells with broad complementary absorption and robust morphology10.1039/C8TA01765D ↗
43. Long-term thermal stability of high-efficiency polymer solar cells based on photocrosslinkable donor-acceptor conjugated polymers10.1002/adma.201004743 ↗
44. Flexible, highly efficient all-polymer solar cells10.1038/ncomms9547 ↗
45. Highly efficient charge-carrier generation and collection in polymer/polymer blend solar cells with a power conversion efficiency of 5.7%10.1039/C4EE01326C ↗
46. Long-term thermally stable organic solar cells based on cross-linkable donor-acceptor conjugated polymers10.1039/C6TA01450J ↗
47. Conflicted effects of a solvent additive on PTB7:PC71BM bulk heterojunction solar cells10.1021/jp510996w ↗
48. Effect of annealing dependent blend morphology and dielectric properties on the performance and stability of non-fullerene organic solar cells10.1016/j.solmat.2017.11.027 ↗
49. Efficient ternary polymer solar cells with two well-compatible donors and one ultranarrow bandgap nonfullerene acceptor10.1002/aenm.201702854 ↗
50. Highly efficient ternary polymer solar cells by optimizing photon harvesting and charge carrier transport10.1016/j.nanoen.2016.02.032 ↗
51. Nematic liquid crystal materials as a morphology regulator for ternary small molecule solar cells with power conversion efficiency exceeding 10%10.1039/C7TA00211D ↗
52. Enhanced thermal stability of organic photovoltaics via incorporating triphenylamine derivatives as additives10.1016/j.solmat.2016.07.041 ↗
53. Nonhalogenated solvent-processed all-polymer solar cells over 7.4% efficiency from quinoxaline-based polymers10.1021/acsami.8b13949 ↗
54. High-performance green solvent processed ternary blended all-polymer solar cells enabled by complementary absorption and improved morphology10.1002/solr.201800196 ↗