Role of elemental intermixing at the In2S3/CIGSe heterojunction deposited using reactive RF magnetron sputtering
Source abstract
Abstract
Abstract In the present work, sputtered In2S3 buffer layers are deposited on Cu(In,Ga)Se2 absorbers with no or minimal sputter damage. Buffer deposition at slower sputter rates (0.22 A/s) with H2S as a reactive gas improved the interface quality and uniformity. We obtained crystalline In2S3 films at room temperature with the deposition parameters used in this work. Elemental intermixing effect at the In2S3/CIGSe heterointerface at different annealing temperatures was mapped in 3-dimensions using atom probe tomography (APT). APT results revealed the induced sputter damage during buffer layer deposition, and the effect of diffusion and segregation of elements at the heterointerface. Knowledge of elemental redistribution at the buffer-absorber heterointerface can help better understand the relation of the chemical intermixing with electrical performance of the cell. X-ray photoelectron spectroscopy (XPS) reveal accelerated Cu+ doping of the In2S3 buffer at 225 °C. Cu-depletion on CIGSe surface up to a few nanometers improves the cell performance. However, at higher annealing temperature of 275 °C, CuIn5S8 and Cu(InxGa1-x)5Se8 phases are formed which is detrimental for cell performance. Na diffusing from the CIGSe absorber segregates at the In2S3/CIGSe heterojunction. This actively suppresses the formation of charged antisites defects, lowering the recombination in the space charged region. Cu-depletion at CIGSe surface, Cu and Na diffusion in In2S3 and passivation of interfacial defect states by Na, giving an efficiency of 13.84% (14.83% with CdS-reference) for sputtered In2S3 buffer layers. Consequently, this work elucidates the chemistry of buried hetero-interfaces and their significance to improve the electrical performance of solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Buffer layers in Cu(In,Ga)Se2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
2. A comparative study of Cd- and Zn-compound buffer layers on Cu(In1−x,Gax)(Sy,Se1−y)2 thin film solar cells10.1002/pip.2695 ↗
3. Junction formation by Zn(O,S) sputtering yields CIGSe-based cells with efficiencies exceeding 18%10.1002/pip.2445 ↗
4. Efficient Cu(In,Ga)(Se,S) 2 modules with sputtered Zn(O,S) buffer layer10.1016/j.tsf.2016.10.010 ↗
5. Indium sulfide and relatives in the world of photovoltaics10.1016/j.solener.2008.08.008 ↗
6. Electrical and optical analysis of InxSy :Na thin-films with varied sodium concentration as buffer layer in Cu(In,Ga)(S,Se) 2 solar cells10.1016/j.tsf.2016.09.025 ↗
7. Improving performance by Na doping of a buffer layer-chemical and electronic structure of the InxSy:Na/CuIn(S,Se)2 thin-film solar cell interface10.1002/pip.2993 ↗
8. Optimization of buffer-window layer system for CIGS thin film devices with indium sulphide buffer by in-line evaporation10.1016/j.solmat.2015.09.038 ↗
9. Growth studies and characterisation of In2S3 thin films deposited by atomic layer deposition (ALD)10.1016/j.apsusc.2003.08.011 ↗
10. Study on ALD In2S3/Cu(In,Ga)Se2 interface formation10.1002/pip.595 ↗
11. Influence of Cl and H 2 O in spray-ILGAR ® solutions on the voltage gain of Cu(In,Ga)(S,Se) 2 solar cells with in 2 S 3 buffer10.1016/j.solmat.2014.08.044 ↗
12. Role of Cl on diffusion of Cu in In2S3 layers prepared by ion layer gas reaction method10.3390/coatings5010054 ↗
13. Structural and chemical analyses of sputtered InxSy buffer layers in Cu(In,Ga)Se2 thin-film solar cells10.1016/j.tsf.2008.10.138 ↗
14. Interfacial layer formations between Cu(In,Ga)Se2 and InxSy layers10.1063/1.2149166 ↗
15. Magnetron sputtering of indium sulphide as the buffer layer in Cu(InGa)Se2-based solar cells
16. Advanced PVD buffers on the road to GW-scale CIGSSe production
17. Sputtering as a viable route for In2S3 buffer layer deposition in high efficiency Cu(In,Ga)Se2 solar cells10.1002/ese3.295 ↗
18. Reliable wet-chemical cleaning of natively oxidized high-efficiency Cu(In,Ga)Se2 thin-film solar cell absorbers10.1063/1.4903976 ↗
19. CIGS thin-film solar cells and modules on enamelled steel substrates10.1016/j.solmat.2012.01.004 ↗
20. Sputtered molybdenum thin films and the application in CIGS solar cells10.1016/j.apsusc.2015.11.235 ↗
21. Atom probe sample preparation
22. Optical properties of thermally evaporated in 2 S 3 thin films measured using photoacoustic spectroscopy10.1016/j.mssp.2017.09.009 ↗
23. Optical and electrical characterization of In2S3 buffer layer for photovoltaics applications
24. Thickness dependent structural and optical properties of vacuum evaporated CuIn5S8 thin films10.1016/j.egypro.2013.12.010 ↗
25. Low temperature pulsed direct current magnetron sputtering technique for single phase β-In 2 S 3 buffer layers for solar cell applications10.1016/j.apsusc.2017.01.147 ↗
26. Copper diffusion in thin In2S3 layers investigated by Rutherford Backscattering Spectroscopy10.1016/j.tsf.2012.07.042 ↗
27. X-ray photoelectron studies on some oxides and hydroxides of cobalt, nickel, and copper10.1021/ac60363a034 ↗
28. Annealing-induced effects on the chemical structure of the In2S3/CuIn(S,Se)2 thin-film solar cell interface10.1021/acs.jpcc.5b01622 ↗
29. Electron spectroscopy for chemical analysis
30. Sulfurization-induced growth of single-crystalline high-mobility β-In2S3 films on InP10.1063/1.5000935 ↗
31. ZnO/InxSy/Cu(In,Ga)Se2 solar cells fabricated by coherent heterojunction formation10.1016/j.tsf.2004.11.032 ↗
32. Analysis of three-dimensional atom-probe data by the proximity histogram10.1007/S100050010051 ↗
33. Atomic-scale characterization of the CdS/CuInSe[sub 2] interface in thin-film solar cells10.1063/1.3560308 ↗
34. Interface engineering and characterization at the atomic-scale of pure and mixed ion layer gas reaction buffer layers in chalcopyrite thin-film solar cells10.1002/pip.2484 ↗
35. Local temperature increases during electric‐field‐induced transistor formation in CuInSe210.1063/1.112322 ↗
36. Direct evidence for diffusion and electromigration of Cu in CuInSe210.1063/1.366252 ↗
37. Confined and chemically flexible grain boundaries in polycrystalline compound semiconductors10.1002/aenm.201100764 ↗
38. Characterisation of Cu(In1–xGax)5Se8 by spectroscopic ellipsometry10.1002/pssc.200881134 ↗
39. A study of bulk NaxCu1−xIn5S8 and its impact on the Cu(In,Ga)Se2/In2S3 interface of solar cells10.1016/j.solmat.2005.11.008 ↗
40. Absolute atomic-scale measurements of the Gibbsian interfacial excess of solute at internal interfaces10.1103/PhysRevB.48.6724 ↗
41. Exploring the p-n junction region in Cu(In,Ga)Se2 thin-film solar cells at the nanometer-scale10.1063/1.4764527 ↗
42. Fast and reliable calculation of the two-diode model without simplifications10.1002/pip.2301 ↗
43. The origin of ideality factors n > 2 of shunts and surfaces In the dark I-V curves of Si solar cells
44. Structural study and electronic band structure investigations of the solid solution NaxCu1−xIn5S8 and its impact on the Cu(In,Ga)Se2/In2S3 interface of solar cells10.1016/j.tsf.2006.12.044 ↗
45. Model for electronic transport in Cu(In,Ga)Se2 solar cells10.1002/(SICI)1099-159X(199811/12)6:6<407::AID-PIP230>3.0.CO;2-U ↗
46. Structural analysis and optical and electrical characterization of the ordered defect compound CuIn 5 Se 810.1088/0268-1242/18/8/309 ↗
47. Bandgap properties of the indium sulfide thin-films grown by co-evaporation10.1016/j.tsf.2008.11.001 ↗
48. Chalcopyrite defect chalcopyrite heterojunctions on the basis of Cuinse210.1063/1.353020 ↗
49. Effect of Cu-deficient layer formation in Cu(In,Ga)Se2 solar-cell performance10.1002/pip.2972 ↗
50. A comprehensive characterization of the interfaces in Mo/CIS/CdS/ZnO solar cell structures10.1016/0927-0248(95)00107-7 ↗
51. Influence of absorber copper concentration on the Cu(In,Ga)Se2/(PVD)In2S3 and Cu(In,Ga)Se2/(CBD)CdS based solar cells performance10.1016/j.tsf.2008.11.015 ↗
52. Influence of post-deposition heat treatment on electrical transport properties of In2S3-buffered Cu(In,Ga)Se2 cells10.1016/j.tsf.2012.11.076 ↗
53. Numerical study of Cu(In,Ga)Se 2 solar cell performance toward 23% conversion efficiency
54. Effect of an additional Cu-deficient layer deposition on alkali treated Cu(In,Ga)Se2 solar cells deposited at low temperature10.1016/j.solmat.2018.04.030 ↗
55. Impact of annealing-induced intermixing on the electronic level alignment at the In2S3/Cu(in,Ga)Se2 thin-film solar cell interface10.1021/acsami.5b10614 ↗
56. Microstructural and chemical studies of interfaces between Cu(In,Ga)Se2 and In2S3 layers10.1063/1.1863454 ↗
57. Role of Cl on diffusion of Cu in In2S3 layers prepared by ion layer gas reaction method10.3390/coatings5010054 ↗
58. Intrinsic point defects in β-In2S3 studied by means of hybrid density-functional theory10.1063/1.5020376 ↗
59. Thermodynamics and kinetics of the copper vacancy in CuInSe2, CuGaSe2, CuInS2, and CuGaS2 from screened-exchange hybrid density functional theory10.1063/1.3456161 ↗
60. Origins of the p-type nature and cation deficiency in Cu2O and related materials10.1103/PhysRevB.76.045209 ↗
61. Native point defects in CuIn1−xGaxSe2: hybrid density functional calculations predict the origin of p- and n-type conductivity10.1039/C4CP02870H ↗
62. Understanding defect-related issues limiting efficiency of CIGS solar cells10.1016/j.solmat.2009.01.022 ↗
63. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
64. The effect of Na on the electronic properties of Cu(In,Ga)Se2 thin films: a local-probe study10.1002/pssr.201600058 ↗
65. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
66. Microstructural and chemical studies of interfaces between Cu(In,Ga)Se[sub 2] and In[sub 2]S[sub 3] layers10.1063/1.1863454 ↗
67. The influence of copper and sodium diffusion across the Cu(In,Ga)Se2/In2S3 interface on solar cell properties