Optimization of phosphorus dopant profile of industrial p-type mono PERC solar cells
Source abstract
Abstract
Abstract Passivated emitter and rear cells (PERC) on p-type Cz Si wafers are currently being migrated to mainstream production, applying the ongoing improvements in recent years. For PERC solar cells, the emitter recombination loss becomes the main loss of the entire cell. Currently, two-step diffusion consisting of low temperature phosphosilicate glass (PSG) deposition and high-temperature drive-in has been widely applied in production and can reduce saturation current density (J0) of the emitter in the passivated area. However, a low contact resistance under metal area cannot be guaranteed. Meanwhile, the determination of the saturation current density J0 in the passivated area is dependent on the injection density during the measurement, and exact calculation of J0,metal is not as convenient as J0,diffusion, which could lead to a wrong assessment in cell analysis. In this study, a three-step diffusion (low-temperature PSG deposition–high-temperature drive-in–low temperature PSG deposition) with low J0 and low Ag-Si contact resistance is investigated and combined with a selective emitter by an etch-back process. The results are compared with a conventional two-step POCl3 diffusion. The accuracy of J0 measurement and J0,metal test method is also discussed. With these improvements, the champion cell efficiency of our PERC solar cells fabricated on 156 × 156 mm2 wafers using screen printing technology and industrial-type process has reached 22.61% with Voc of 684.4 mV and a fill factor of 81.49%, as confirmed by Fraunhofer ISE CalLab PV cells. By implementing the diffusion process to mass production, the average cell-efficiency gain is approximately 0.2% with a median efficiency of 21.7%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. 〈http://pv.energytrend.com/research/PERC_Cells_Global_Production_Capacity_to_Reach_25GW_in_2017.html〉.
2. 〈http://www.pv-tech.org/news/perc-solar-cell-migration-to-hit-25gw-in-2017-energytrend〉.
3. Effect of porous Si and an etch-back process on the performance of a selective emitter solar cell10.1016/j.solmat.2012.10.009 ↗
4. G. Hahn, Status of selective emitter technology, in: Proceedings of the 25th EU PVSEC, Valencia, 2010, pp. 1091–1096.
5. A. Zerga, A. Slaoui, J.C. Muller, B. Bazer-Bachi, D. Ballutaud, N. Le Quang, G. Goaer, SE formation for large scale industrially mc-Si solar cells by hydrogen plasma and wet etching, in: Proceedings of the 21st EC PVSEC, Dresden, 2006, pp. 865–869.
6. H. Haverkamp, A. Dastgheib-Shirazi, B. Raabe, F. Book, G. Hahn, Minimizing the electrical losses on the front side: development of a selective emitter process from a single diffusion, in: Proceedings of the 33rd IEEE PVSC, San Diego, 2008, pp. 430–433.10.1109/PVSC.2008.4922443 ↗
7. High efficiency selective emitter cells using patterned ion implantation10.1016/j.egypro.2011.06.205 ↗
8. F. Book, A. Dastgheib-Shirazi, B. Raabe, H. Haverkamp, G. Hahn, P. Grabitz, Detailed analysis of high sheetresistance emitters for selectively doped silicon solar cells, in: Proceedings of the 24th EU PVSEC, Hamburg 2009, pp. 1719–1722.
9. High efficiency solar cell structures through the use of laser doping
10. S. Lohmüller, E. Lohmüller, P. Saint-Cast, et al. Key Aspects for fabrication of p-Type Cz-Si PERC solar cells exceeding 22% conversion efficiency, in: Proceedings of hte 27th EUPVSEC, 2017, pp. 406-412.
11. F. Ye, W. Deng, D. Chen, Y. Chen, The influence of a low doping concentration emitter on the performance of selective emitter silicon solar cells, in: Proceedings of the 24th EUPVSEC, 2014, pp. 1069-1071.
12. Y. Komatsu, M.Koorn, et al. “Efficiency Improvement by Deeper Emitter with Lower Sheet Resistance forUniform Emitters” in: Proceedings of the 1st International Conference on Silicon Photovoltaics, 8, 2011, pp. 515–520.10.1016/j.egypro.2011.06.175 ↗
13. Structure and composition of phosphosilicate glass systems formed by POCl3 diffusion10.1016/j.egypro.2017.09.280 ↗
14. P. Rothhardt et al. Control of phosphorus doping profiles for co-diffusion processes, in: Proceedings of the 27th EUPVSEC, 2012.
15. On the determination of the emitter saturation current density from lifetime measurements of silicon devices10.1002/pip.2167 ↗
16. B. Min, A. Dastgheib-Shirazi, P. P. Altermatt, H. Kurz, “Accurate determination of the emitter saturation currentdensity for industrial P-diffused emitters”, in: Proceedings of the 29th EUPVEC, 2014, pp. 463-466.
17. W. Deng, F. Ye, R. Liu, et al. 22.61% Efficient Fully Screen Printed PERC Solar Cell, in: Proceedings of the IEEE Photovoltaic Specialists Conference, 2017.10.1109/PVSC.2017.8366416 ↗
18. R.A. Sinton, A. Cuevas, A quasi-steady-state open-circuit voltage method for solar cell characterization. in: Proceedings of the16th EUPVSEC,Vol, 2000, pp. 1152–1155.
19. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, 1985, pp. 578–583.
20. Carrier-diffusion corrected J0-analysis of charge carrier lifetime measurements for increased consistency10.1016/j.solmat.2015.06.043 ↗
21. High concentration in-diffusion of phosphorus in Si from a spray-on source10.1063/1.2179197 ↗
22. Measurements of bandgap narrowing in Si bipolar transistors10.1016/0038-1101(76)90043-5 ↗
23. Minority carrier recombination in heavily-doped silicon10.1016/0038-1101(83)90174-0 ↗
24. Sze · 1981
25. Y. Komatsu, G. Galbiati, M. Lamers, et al., Innovative diffusion processes for improved efficiency on industrialsolar cells by doping profile manipulation, in: Proceedings of the 24th EUPVSEC, 2009, pp.1063–7.
26. Variations of box plots10.1080/00031305.1978.10479236 ↗
27. F. Ye, W. Deng, W.u. Guo, R. Liu, D. Chen, Y. Chen, Y. Yang, N. Yuan, J. Ding, Z. Feng, P. Altermatt, P. Verlinden, 22.13% Efficient Industrial P-Type Mono PERC Solar Cell, in: Proceedings of the 43rd IEEE PV Specialists Conference, 2016, pp. 3360–3365.10.1109/PVSC.2016.7750289 ↗