Corrosion of AISI316 as containment material for latent heat thermal energy storage systems based on carbonates
Source abstract
Abstract
Considerable effort has been devoted to the characterization of thermal properties of the different types of materials that can be used as thermal energy storage (TES) media, but scarce literature exists concerning the materials to manufacture the tanks that can be used to contain these storage media. One of the main concerns when selecting the most suitable material for these tanks is its resistance to corrosion due to molten salts that constitute the TES system. Dynamic gravimetric analysis is a newly proposed method for the study of corrosion on metals, which optimizes the standard procedure described by ASTM G1-03. The new technique avoids the direct handling of samples, so more accurate values can be obtained. In this work, the resistance to corrosion of AISI 316 stainless steel samples in contact with commercial grade molten salts of the Li2CO3-Na2CO3-K2CO3 system, at 600 °C for different exposure times, has been determined by using this new methodology. The results show that the initial corrosion rate is lower at higher amounts of lithium carbonate present in the molten salts mixture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. State of the art on high temperature thermal energy storage for power generation. Part 1-Concepts, materials and modellization10.1016/j.rser.2009.07.035 ↗
2. Design and calculation of a new storage tank for concentrating solar power plant10.1016/j.enconman.2015.05.022 ↗
3. Immersion corrosion tests on metal-salt hydrate pairs used for latent heat storage in the 32 to 36°C temperature range10.1002/1521-4176(200102)52:2<140::AID-MACO140>3.0.CO;2-R ↗
4. Salt hydrates used for latent heat storage: corrosion of metals and reliability of thermal performance10.1016/0038-092X(88)90136-3 ↗
5. Physical and chemical properties of latent heat storage materials
6. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
7. Materials selection of steam-phase change material (PCM) heat exchanger for thermal energy storage systems in direct steam generation facilities10.1016/j.solmat.2016.10.010 ↗
8. H.C. Maru J.F. Dullea A. Kardas L. Paul Molten Salt Therm. Energy Storage Syst. 1978. 〈http://allen.neep.wisc.edu/shell/index.php/salts〉.
9. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
10. 2003 · 13A · 124
11. Corrosion and passivation behaviours of iron in molten alkali carbonates10.4152/pea.200504423 ↗
12. A.M. Kruizenga, Corrosion Mechanisms in Chloride and Carbonate Salts, Alburquerque, NM. 〈http://prod.sandia.gov/techlib/access-control.cgi/2012/127594.pdf〉.10.2172/1051732 ↗
13. Corrosion of steel alloys in eutectic NaCl+Na2CO3 at 700 °C and Li2CO3 + K2CO3 + Na2CO3 at 450 °C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
14. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
15. Corrosion and passivation behaviors of some stainless steel alloys in molten alkali carbonates10.1016/S0013-4686(02)00506-6 ↗
16. ASTM, ASTM G1-03, 2011, Standard Practice for Preparing, Cleaning and Evaluating Corrosion Test Specimens., Annu. B. ASTM Stand. doi:10.1520/G0046-94R05.2, 2011.
17. International Organization for Standardization (ISO), Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens (ISO 8407:2009), 2009.
18. Study of corrosion by dynamic gravimetric analysis ( DGA) methodology. Influence of chloride content in solar salt10.1016/j.solmat.2016.07.027 ↗
19. FactSage thermochemical software and databases10.1016/S0364-5916(02)00035-4 ↗
20. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
21. International Renewable Energy Agency (IRENA), Concentrating Solar Power. doi:10.1063/1.2993731, 2012.10.1063/1.2993731 ↗
22. A eutectic salt high temperature phase change material: thermal stability and corrosion of SS316 with respect to thermal cycling10.1016/j.solmat.2017.05.047 ↗
23. Corrosion evaluation of alloys and MCrAlX coatings in molten carbonates for thermal solar applications10.1016/j.solmat.2016.07.029 ↗
24. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗