journal article·2018-06Open access

Synthesis of in-gap band CuGaS2:Cr absorbers and numerical assessment of their performance in solar cells

Shafi Ullah, Hanif Ullah, Feriel Bouhjar, Miguel Mollar, Bernabé Marí

Abstract

[EN] CuGaS2 thin films were obtained by sulfurization of CuGaSe2. CuGaSe2 thin films were first electrodeposited from aqueous solutions containing CuCl2, GaCl3, and H2SeO3 and subsequently annealed at 400 °C for 10 min in forming gas atmosphere and in the presence of molecular sulfur. This sulfurization process resulted in the complete conversion of CuGaSe2 into CuGaS2. The formation of CuGaS2 was proven by X-Ray diffraction and optical spectroscopy. Diffraction peaks of CuGaS2 shifted to higher angles than those observed for CuGaSe2 films, and the optical band gap shifted to blue rising from 1.66 eV for CuGaSe2 to 2.2 eV for CuGaS2. When Cr ions were added to the initial electrolyte, the final CuGaS2 films exhibited a broad in-gap absorption band centred at 1.63 eV that can be ascribed to Cr atoms in Ga sites. The performance of solar cells based on CuGaS2:Cr absorbers containing an in-gap absorption band was then estimated by numerical simulation using Solar Cell Capacitance Simulator Software. Both quantum efficiency and short circuit current of simulated Mo/CuGaS2:Cr/CdS/ZnO solar cells rose up proportionally to the amount of Cr present in CuGaS2:Cr absorbers. As a result, the photo conversion efficiency of the simulated devices changed from 14.7% for CuGaS2 to 34% for CuGaS2:Cr absorbers. Nevertheless, when neutral defects related to Cr-doping were introduced in the absorber layer, the positive effect of the enhancement of photon harvesting due to IGB was compensated by a decline in the carrier collection and the overall efficiency of the device fell considerably.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Electronic structure of the Zn (O, O, S)/Cu (In, Ga) Se2 thin‐film solar cell interface10.1002/pip.2764 ↗
2. Spray‐deposited CuIn1−xGaxSe2 solar cell absorbers: influence of spray deposition parameters and crystallization promoters10.1002/pssa.201431425 ↗
3. Progress in electrodeposited absorber layer for CuIn(1−x)GaxSe2 (CIGS) solar cells10.1016/j.solener.2011.08.003 ↗
4. S. Aksu, S. Pethe, A.K. Shwarsctein, S. Kundu, M. Pinarbasi, Advances in Electroplating-Based CIGS Solar Cell Fabrication. In: Proceedings of the 38th IEEE Photovotaics Specialists Conference, 2012, pp. 3092–3097.10.1109/PVSC.2012.6318235 ↗
5. CIGS thin film solar cells by electrodeposition10.5229/JKES.2011.14.2.061 ↗
6. Intermediate-band solar cells based on dilute alloys and quantum dots10.1007/s12200-011-0151-z ↗
7. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
8. increasing the efficiency of ideal solar cells by photon induced transitions at intermediate levels10.1103/PhysRevLett.78.5014 ↗
9. First principles calculation of isolated intermediate bands formation in a transition metal‐doped chalcopyrite‐type semiconductor10.1002/pssa.200566179 ↗
10. Analysis of the electronic structure of modified CuGaS2 with selected substitutional impurities: prospects for intermediate-band thin-film solar cells based on Cu-containing chalcopyrites10.1021/jp909895q ↗
11. Theoretical modelling of intermediate band solar cell materials based on metal-doped chalcopyrite compounds10.1016/j.tsf.2006.12.170 ↗
12. Enhancement of optical absorption in Ga-chalcopyrite-based intermediate-band materials for high efficiency solar cells10.1016/j.solmat.2010.06.019 ↗
13. Modeling thin‐film PV devices10.1002/pip.524 ↗
14. Numerical analysis of SnS based polycrystalline solar cells10.1016/j.spmi.2014.03.042 ↗
15. The effect of sulfurization temperature on CuIn (Se, S)2 solar cells synthesized by electrodeposition10.1149/2.0271501jes ↗
16. Low-temperature processing of a solution-deposited CuInSSe thin-film solar cell10.1016/j.tsf.2009.06.032 ↗
17. Influence of encapsulated electron active molecules of single walled-carbon nanotubes on superstrate-type Cu (In, Ga) Se2 solar cells10.1016/j.matchemphys.2013.12.011 ↗
18. Influence of surface properties on the performance of Cu(In, Ga)(Se, S)2 thin-film solar cells using Kelvin probe force microscopy10.1039/C5RA05330G ↗
19. Electrodeposition of CuGaSe2 and CuGaS2 for photovoltaic applications10.1007/s10008-016-3237-0 ↗
20. Thermodynamics of the formation of Ti-and Cr-doped CuGaS2 intermediate-band photovoltaic materials10.1021/jp0774185 ↗
21. H. Ullah, S. Ullah, B. Marí Soucase, Baseline of numerical simulations for ZnTe based thin-film solar cells. International Conference on Energy Systems and Policies (ICESP), 2014, pp. 1–6.10.1109/ICESP.2014.7347013 ↗