journal article·2017-01

Pre-texturing multi-crystalline silicon wafer via a two-step alkali etching method to achieve efficient nanostructured solar cells

Fenqin Hu, Yun Sun, Jiawei Zha, Kexun Chen, Shuai Zou, Liang Fang, Xiaodong Su

Publisher page

Abstract

Alkali solutions are not suitable for texturing multi-crystalline silicon (mc-Si) wafer due to the anisotropic etching. In this study, a two-step alkali-etch process is developed to form a flat surface on the wafer, which can be quickly and nearly isotropically etched by immersion in a sodium hydroxide solution, followed by a sodium hydroxide-sodium hypochlorite solution. The etching process leads to the formation of homogenous nanostructure, thereby improving the cell's repeatability and performance by simultaneously increasing its short-circuit current and open-circuit voltage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. The passivated emitter and rear cell (PERC): from conception to mass production10.1016/j.solmat.2015.06.055 ↗
2. 18.9% efficient full area laser doped silicon solar cell10.1063/1.3232208 ↗
3. High quality ion implanted boron emitters in an interdigitated back contact solar cell with 20% efficiency10.1016/j.egypro.2011.06.174 ↗
4. 19.6% cast mono-MWT solar cells and 268W modules10.1109/JPHOTOV.2013.2239357 ↗
5. Basic mechanisms and models of multi-wire sawing10.1002/adem.200400578 ↗
6. Multicrystalline silicon for solar cells10.1016/j.tsf.2005.01.061 ↗
7. 17.3% efficient black silicon solar cell without dielectric antireflection coating10.1016/j.solener.2014.10.029 ↗
8. Design of multilayer antireflection coatingsmade from co-sputtered and low-refractive-index materials by genetic algorithm10.1364/OE.16.005290 ↗
9. Black silicon solar cells with interdigitated back-contacts achieve 22.1% efficiency10.1038/nnano.2015.89 ↗
10. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
11. Texturization of multicrystalline silicon by wet chemical etching for silicon solar cells10.1007/s10853-005-0583-1 ↗
12. 18.45%-efficient multi-crystalline silicon solar cell with nano-scale pseudo-pyramid texture10.1002/adfm.201401589 ↗
13. Next-generation multi-crystalline silicon solar cells: diamond-wire sawing, nano-texture and high efficiency10.1016/j.solmat.2015.05.030 ↗
14. Multi-scale surface texture to improve blue response of nanoporous black silicon solar cells10.1063/1.3636105 ↗
15. Anisotropic etching of crystalline silicon in alkaline solutions10.1149/1.2086278 ↗
16. A cost-effective alkaline multicrystalline silicon surface polishing solution with improved smoothness10.1016/j.solmat.2009.05.024 ↗
17. HF/HNO3 etching of the saw damage10.1016/j.egypro.2013.07.271 ↗
18. Novel low cost chemical texturing for very large area industrial multi-crystalline silicon solar cells10.1088/0268-1242/20/9/009 ↗
19. Analysis of multicrystalline silicon solar cells by modified 3-diode equivalent circuit model taking leakage current through periphery into consideration10.1016/j.solmat.2007.04.009 ↗
20. Dark I–V–T measurements and characteristics of (n) a-Si/(p) c-Si heterojunction solar cells10.1016/S0927-0248(00)00385-8 ↗
21. J. Greulich, M. Glatthaar, A. Krieg, G. Emanuel, S. Rein, JV characteristics of industrial silicon solar cells: influence of distributed series resistance and Shockley Read Hall recombination, in: Proceedings of the 24th European PV solar energy conference and exihibition, Hamburg, Germany, 2009.