journal article·2012-12

Local rear contacts to silicon solar cells by in-line high-rate evaporation of aluminum

Christoph Mader, Jens Müller, Stefan Eidelloth, Rolf Brendel

Publisher page

Abstract

Abstract We contact p -type wafers and boron-diffused layers by laser ablation of a passivating aluminum oxide and silicon nitride stack and subsequent in-line high-rate evaporation of aluminum. We measure saturation current densities at the base contacts of 2.5×10 6 –1.9×10 7 fA/cm 2 for base resistivities of 0.5–3.8 Ω cm and 491–905 fA/cm 2 for the contacts to boron-diffused layers of sheet resistances of 23–86 Ω/sq. The contact resistivity of Al layers to p -type silicon with surface doping densities of 4×10 15 –3×10 19 cm −3 is in the range of 4–0.1 mΩ cm 2 , respectively. The measured contact properties allow for the fabrication of highly efficient ‘passivated emitter and rear cells’ (PERC) and ‘passivated emitter and rear totally diffused cells’ (PERT). Numerical simulations show that evaporated rear contacts in combination with screen printed contacts at the front allow for energy conversion efficiencies of 20.6% and of 21.1%, for PERC and PERT cells, respectively. The simulated free energy losses show that such cells are not limited by the in-line evaporated point contacts on the rear side.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
2. Comparison of the open circuit voltage of simplified PERC cells passivated with PECVD silicon nitride and thermal silicon oxide10.1002/1099-159X(200009/10)8:5<529::AID-PIP334>3.0.CO;2-6 ↗
3. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
4. 19.4%-efficient large-area fully screen-printed silicon solar cells10.1002/pssr.201105045 ↗
5. V. Meemongkolkiat, K. Nakayashiki, D. Kim, S. Kim, A. Shaikh, A. Kuebelbeck, W. Stockum, A. Rohatgi, Investigation of modified screen-printing Al pastes for local back surface field formation, in: Proceedings of the 4th World Conference on Photovoltaic Energy Conversion, 7–12 May 2006, Waikoloa, HI, USA, pp. 1338−1341.10.1109/WCPEC.2006.279678 ↗
6. A. Mohr, P. Engelhart, C. Klenke, S. Wanka, A. Stekolnikov, M.Scherff, R. Seguin, S. Tardon, T. Rudolph, M. Hofmann, F. Stenzel, J. Lee, S. Diez, J. Wendt, W. Brendle, S. Schmidt, J. Müller, P. Wawer, M. Hofmann, P. Saint-Cast, J. Nekarda, D. Erath, J. Rentsch, R. Preu, 20% efficient rear side passivated solar cells in pilot series designed for conventional module assembly, in: Proceedings of the 26st European Photovoltaic Solar Energy Conference, 5–9 September 2011, Hamburg, Germany, pp. 2150–2153.
7. J. Nekarda, D. Reinwand, A. Grohe, P. Hartmann, R.Preu, R. Trassl, S. Wieder, Industrial PVD metallization for high efficiency crystalline silicon solar cells, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, 7−12 June 2009, Philadelphia, PA, USA, pp. 892−896.10.1109/PVSC.2009.5411146 ↗
8. F.Heinemeyer, C. Mader, D. Münster, T. Dullweber, N.-P. Harder, R. Brendel, Inline high-rate thermal evaporation of aluminum as a novel industrial solar cell metallization scheme, in: Proceedings of the 2nd Workshop on Metallization, 14–15 April 2010, Constance, BW, Germany, pp. 48−51.
9. C. Mader, J. Müller, S. Gatz, T. Dullweber, R. Brendel, Rear side point-contacts by in-line thermal evaporation of aluminum, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 20−25 June 2010, Honolulu, HI, USA, pp. 1446−1449.10.1109/PVSC.2010.5614430 ↗
10. D. Kane, R. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, 21–25 October 1985, Las Vegas, NV, USA, pp. 578–583.
11. General parameterization of Auger recombination in crystal Silicon10.1063/1.1432476 ↗
12. B. Fischer, Loss Analysis of Crystalline Silicon Cells Using Photoconductance and Quantum Efficiency Measurements, Ph.D. Thesis, University of Konstanz, 2003, pp. 18–28.
13. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
14. Intrinsic concentration, eff. densities of states, and eff. mass in silicon10.1063/1.345414 ↗
15. Contact resistance and contact resistivity10.1149/1.2404240 ↗
16. Messung des Übergangswiderstandes zwischen Metall und Diffusionsschicht in Si-Planarelementen10.1016/0038-1101(69)90045-8 ↗
17. Solar cell contact resistance—a review10.1109/T-ED.1984.21583 ↗
18. S. Eidelloth, F. Haase, R. Brendel, Simulation tool for equivalent circuit modeling of photovoltaic devices, IEEE Journal of Photovoltaics PP (99) (2012) 1–8, http://dx.doi.org/10.1109/JPHOTOV.2012.2187774.10.1109/JPHOTOV.2012.2187774 ↗
19. S. Eideloth, C. Mader, R. Brendel, in preparation.
20. Record low surface recombination velocities on 1Ωcm p-silicon using remote plasma silicon nitride passivation10.1063/1.115936 ↗
21. Laser ablation of SiO2 for locally contacted Si solar cells with ultra-short pulses10.1002/pip.758 ↗
22. Temperature of silicon wafers during in-line high-rate evaporation of aluminum10.1016/j.solmat.2011.06.031 ↗
23. Dynamic carrier lifetime imaging of silicon wafers using an infrared-camera-based approach10.1063/1.2972122 ↗
24. Recombination at laser-processed local base contacts by dynamic infrared lifetime mapping10.1063/1.3517109 ↗
25. Charge carrier lifetime degradation in Cz silicon through the formation of a boron-rich layer during BBr3 diffusion processes10.1088/0268-1242/25/5/055001 ↗
26. M. Kessler, D. Münster, T. Neubert, C. Mader, J. Schmidt, R. Brendel, High-efficiency back-junction silicon solar cell with an in-line evaporated aluminum front grid, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, 19–24 June 2011, Seattle, WA, USA, pp. 1085–1090.10.1109/PVSC.2011.6186141 ↗
27. Formation of highly aluminum-doped p-type silicon regions by in-line high-rate evaporation10.1016/j.solmat.2011.01.039 ↗
28. Formation of locally aluminum-doped p-type silicon regions by in-line high-rate evaporation10.1016/j.egypro.2011.06.176 ↗
29. Sensitivity and transient response of microwave reflection measurements10.1063/1.358670 ↗
30. Direct observation of a scaling effect on effective minority carrier lifetimes10.1063/1.358450 ↗
31. Surface recombination velocity of phosphorus-diffused silicon solar cell emitters passivated with plasma enhanced chemical vapor deposited silicon nitride and thermal silicon oxide10.1063/1.1350633 ↗
32. Surface recombination velocity of highly doped n-type silicon10.1063/1.363250 ↗
33. Zur Halbleitertheorie der Sperrschicht-und Spitzengleichrichter10.1007/BF01340116 ↗
34. Electron tunneling and contact resistance of metal-silicon contact barriers10.1016/0038-1101(70)90056-0 ↗
35. Specific contact resistivity of metal-semiconductor contacts-a new, accurate method linked to spreading resistance10.1109/16.2483 ↗
36. S. Gatz, T: Dullweber, R. Brendel, Contact resistance of local rear side contacts of screen-printed silicon PERC solar cells with efficiencies up to 19.4%, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, 19–24 June 2011, Seattle, WA, USA, pp. 3658–3664.10.1109/PVSC.2011.6185943 ↗
37. P. Basore, D. Rover, A. Smith, PC-1D: Enhanced numerical solar cell modeling, in: Proceedings of the 20th IEEE Photovoltaic Specialists Conference, 26–30 September 1988, Las Vegas, NV, USA, pp. 389–396.10.1109/PVSC.1988.105730 ↗
38. Comprehensive analytical model for locally contacted rear surface passivated solar cells10.1063/1.3506706 ↗
39. H. Fischer, W. Pschunder, Investigation of photon and thermal induced changes in silicon solar cells, in: Proceedings of the 10th IEEE Photovoltaic Specialists Conference, 13–15 November 1973, Palo Alto, CA, USA, pp. 404–411.
40. Fundamental boron–oxygen related carrier lifetime limit in mono- and multicrystalline silicon10.1002/pip.586 ↗
41. A. Herguth, G. Schubert, M. Kaes, and G. Hahn, Avoiding boron–oxygen related degradation in highly boron-doped Cz silicon, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, 4–8 September 2006, Dresden, Germany, pp. 530–537.
42. Deactivation of the boron–oxygen recombination center in silicon by illumination at elevated temperature10.1002/pssr.200802009 ↗
43. K. Bothe, Oxygen-Related Trapping and Recombination Centres in Boron-doped Crystalline Silicon, Ph.D. Thesis, University of Hannover, 2006, pp. 130–134.
44. B. Lim, Boron–oxygen-related recombination centers in crystalline silicon and the effects of dopant-compensation, Ph.D. Thesis, University of Hannover, 2012, pp. 73–74.
45. Models for contacts to planar devices10.1016/0038-1101(72)90048-2 ↗
46. S. Glunz, E. Schneiderlöchner, D. Kray, A. Grohe, M. Hermle, H. Kampwerth, R. Preu, G. Willeke, Laser-fired contact silicon solar cells on p- and n-substrates, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, 7–11 June 2004, Paris, France, pp. 408–411.
47. K. McIntosh, P. Altermatt, A freeware 1D emitter model for silicon solar cells, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 20–25 June 2010, Honolulu, HI, USA, pp. 2188–2193.10.1109/PVSC.2010.5616124 ↗
48. Optimization of the back contact in c-Si solar cells10.1016/j.sse.2009.04.030 ↗
49. 24% efficient PERL structure silicon solar cells
50. Series resistance caused by the localized rear contact in high efficiency silicon solar cells10.1016/0927-0248(94)90258-5 ↗
51. Theory of analyzing free energy losses in solar cells10.1063/1.3006053 ↗
52. Loss analysis of back-contact back-junction thin-film monocrystalline silicon solar cells10.1063/1.3669388 ↗