journal article·2014-11

Properties and microstructures of SnAgCu– x Eu alloys for concentrator silicon solar cells solder layer

Liang Zhang, Ji-guang Han, Yong-huan Guo, Lei Sun

Publisher page

Abstract

Abstract In order to improve the reliability of solar cell solder joints, rare earth Eu was selected as the additive into SnAgCu solders; the properties and microstructure of SnAgCu– x Eu were studied systematically. The results indicated that the addition of Eu can improve the solderability, mechanical properties, creep resistance, and thermal fatigue reliability. The optimum content of Eu is 0.04 wt%; the creep rupture life can be increased up to 8.5 times, and the thermal fatigue life is 37.4% higher than original SnAgCu solders. However, excessive content of Eu addition can deteriorate the properties. And the rare earth Eu can refine the microstructure matrix, and reduce the size of β -Sn.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Influence of Ni nanoparticle on morphology and growth of interfacial intermetallic compounds between Sn–3.8Ag–0.7Cu lead-free solder and copper substrate10.1016/j.intermet.2012.09.016 ↗
2. Comparison of spreading behaviour and interfacial microstructure in Sn–0.7Cu, Sn–0.3Ag–0.7Cu and Sn–2.5Ag–0.5Cu lead-free solder alloys on Fe–42Ni substrate10.1179/1743284712Y.0000000162 ↗
3. Structure and properties of lead-free solders bearing micro and nano particles10.1016/j.mser.2014.06.001 ↗
4. Effect of rare earth Ce on the fatigue life of SnAgCu solder joints in WLCSP device using FEM and experiments10.1016/j.msea.2013.12.098 ↗
5. A joint thermal-electrical analysis of void formation effects on concentrator silicon solar cells solder layer10.1016/j.solmat.2012.12.034 ↗
6. Microstructures and properties of SnZn lead-free solder joints bearing La for electronic packaging10.1109/TED.2012.2219624 ↗
7. Bonding nature of rare-earth-containing lead-free solders10.1063/1.1435075 ↗
8. Effects of rare earth Ce on microstructures, solderability of Sn–Ag–Cu and Sn–Cu–Ni solder as well as mechanical properties of soldered joints10.1016/j.jallcom.2007.12.033 ↗
9. Improvement of wettability and tensile property in Sn–Ag-RE lead-free solder alloy10.1016/S0167-577X(02)00672-9 ↗
10. A review of mechanical properties of lead-free solders for electronic packaging10.1007/s10853-008-3125-9 ↗
11. Villars · 2006
12. Creep deformation behavior of Sn–3.5Ag solder/Cu couple at small length scales10.1016/j.actamat.2004.06.010 ↗
13. Reliability of lead-free solder joints in CSP device under thermal cycling10.1007/s10854-014-1711-y ↗
14. Microstructure and creep deformation of Sn–Ag–Cu–Bi/Cu solder joints10.1007/s11664-007-0368-1 ↗
15. Creep behavior of eutectic Sn–Ag lead-free solder alloy10.1557/JMR.2002.0420 ↗