Triphenylamine-substituted methanofullerene derivatives for enhanced open-circuit voltages and efficiencies in polymer solar cells
Source abstract
Abstract
Abstract A new class of triphenylamine substituted methanofullerene derivatives, bis(4'-(diphenylamino)biphenyl-4-yl)methanofullerene (1) and the bisadduct (2), were synthesized. The incident photon to current efficiency (IPCE) studies revealed that the diphenylamino components have contribution to the photocurrent that expands the light harvesting window around 400 nm. When being blended with poly (3-hexylthiophene) (P3HT) to fabricate the solar cell, the device of P3HT:1 (1:0.7) shows high open circuit voltage (Voc) of 0.69 V under the illumination of AM 1.5, 100 mW/cm2 with high power conversion efficiency (PCE) of 3.16%, which is about 0.1 V higher than that of the corresponding [6,6]-phenyl C61 butyric acid methyl ester (PCBM) devices. This indicates that the arylamine substituents on 1 have played some special roles on the high Voc performance. Similar effects are also observed for 2. The device of P3HT:2 (1:1) shows even higher Voc of 0.87 V with the PCE of 1.83%. These results indicate that 1 and 2 are alternative high performance acceptors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
3. Thermally stable efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
4. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
5. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
6. Laminated fabrication of polymeric photovoltaic diodes10.1038/26183 ↗
7. The role of processing in the fabrication and optimization of plastic solar cells10.1002/adma.200802559 ↗
8. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
9. Organic photovoltaics10.1039/b812502n ↗
10. Molecular bulk heterojunctions: an emerging approach to organic solar cells10.1021/ar900041b ↗
11. 2.5% efficient organic plastic solar cells10.1063/1.1345834 ↗
12. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
13. Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality10.1364/OE.18.00A272 ↗
14. Polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
15. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
16. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
17. Manufacture, integration and demonstration of polymer solar cells in a lamp for the "Lighting Africa" initiative10.1039/b918441d ↗
18. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
19. Preparation and characterization of methanofullerenes for polymer–fullerene bulk heterojunction solar cells10.1016/j.carbon.2007.09.050 ↗
20. Solution processable C60 fullerene–hydrazone dyads for optoelectronics10.1016/j.carbon.2010.09.030 ↗
21. Self-assembly and optical properties of hydrogen bonded nanostructures containing C60 and pyrene10.1016/j.carbon.2006.03.031 ↗
22. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
23. Fabrication of polymer solar cells using aqueous processing for all layers including the metal back electrode10.1002/aenm.201000007 ↗
24. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
25. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
26. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
27. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
28. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
29. Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with bi(thienylenevinylene) side chains10.1021/ja060141m ↗
30. High photovoltage achieved in low band gap polymer solar cells by adjusting energy levels of a polymer with the LUMOs of fullerene derivatives10.1039/b811957k ↗
31. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
32. Low-bandgap poly(thiophene-phenylene-thiophene) derivatives with broaden absorption spectra for use in high-performance bulk-heterojunction polymer solar cells10.1021/ja801877k ↗
33. Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: the effect of processing on the performance10.1002/adma.200800456 ↗
34. Investigation of multi-donor bulk-heterojunction photovoltaic cells based on P3HT:PCBM system10.1016/j.solmat.2010.10.002 ↗
35. Organic molecules based on dithienyl-2,1,3-benzothiadiazole as new donor materials for solution-processed organic photovoltaic cells10.1016/j.solmat.2010.07.017 ↗
36. Synthesis, photophysical and photovoltaic properties of star-shaped molecules with triphenylamine as core and phenylethenylthiophene or dithienylethylene as arms10.1016/j.solmat.2009.07.010 ↗
37. Synthesis and photovoltaic properties of a star-shaped molecule with triphenylamine as core and benzo[1,2,5]thiadiazol vinylene as arms10.1016/j.solmat.2008.09.001 ↗
38. Solution processable D-A-D molecules based on triphenylamine for efficient organic solar cells10.1016/j.solmat.2009.11.005 ↗
39. Thienyl-substituted methanofullerene derivatives for organic photovoltaic cells10.1039/B916597E ↗
40. Thienyl analog of 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene for bulk heterojunction photovoltaic devices in combination with polythiophenes10.1063/1.2397003 ↗
41. Indene–C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
42. The interplay of efficiency and morphology in photovoltaic devices based on interpenetrating networks of conjugated polymers with fullerenes10.1016/S0379-6779(00)00276-9 ↗
43. Thermally stable organic bulk heterojunction photovoltaic cells incorporating an amorphous fullerene derivative as an electron acceptor10.1016/j.solmat.2010.08.009 ↗
44. Influence of functionalized fullerene structure on polymer photovoltaic degradation10.1016/j.solmat.2009.11.020 ↗
45. Synthesis and photovoltaic properties of soluble fulleropyrrolidine derivatives for organic solar cells10.1016/j.solmat.2007.02.004 ↗
46. Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells10.1002/adma.200702438 ↗
47. Electron trapping in higher adduct fullerene-based solar cells10.1002/adfm.200900459 ↗
48. Charge carrier transporting molecular materials and their applications in devices10.1021/cr050143+ ↗
49. Formation of a ground-state charge-transfer complex in polyfluorene/[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) blend films and its role in the function of polymer/PCBM solar cells10.1002/adfm.200600484 ↗
50. A simple and effective way of achieving highly efficient and thermally stable bulk-heterojunction polymer solar cells using amorphous fullerene derivatives as electron acceptor10.1021/cm9009282 ↗
51. Increasing the open circuit voltage of bulk-heterojunction solar cells by raising the LUMO level of the acceptor10.1021/ol062666p ↗
52. Synthesis and photoinduced electron-transfer process of a novel triphenylamine-substituted polyfluorene–C60 Triad10.1002/chem.200600902 ↗
53. Highly efficient light-harvesting organofullerenes10.1021/ol047451z ↗
54. Synthesis of 1,1'-binaphthyl-based enantiopure C60 Dimers10.1021/jo020088u ↗
55. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
56. Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites10.1088/0957-4484/15/9/035 ↗
57. Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films10.1038/nature01949 ↗
58. Ligand-accelerated catalysis of the ullmann condensation: application to hole conducting triarylamines10.1021/jo981804o ↗
59. Relating the morphology of poly(p-phenylene vinylene)/methanofullerene blends to solar-cell performance10.1002/adfm.200305049 ↗
60. Solvation-Induced morphology effects on the performance of polymer-based photovoltaic devices10.1002/1616-3028(200112)11:6<420::AID-ADFM420>3.0.CO;2-K ↗
61. Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): fullerene10.1063/1.1929875 ↗
62. Diphenylmethanofullerenes: new and efficient acceptors in bulk-heterojunction solar cells10.1002/adfm.200500097 ↗
63. Compositional dependence of the performance of poly(p-phenylene vinylene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200400345 ↗
64. Improvement of the performance of polymer/C60 photovoltaic cells by small-molecule doping10.1016/S0379-6779(02)01218-3 ↗