journal article·2014-11

Anti-reflection porous SiO 2 thin film deposited using reactive high-power impulse magnetron sputtering at high working pressure for use in a-Si:H solar cells

Kyeonghun Kim, Sungmin Kim, Sehoon An, Geun-Hyuk Lee, Donghwan Kim, Seunghee Han

Publisher page

Abstract

Abstract Porous SiO2 thin films with low reflectance and high transmittance were obtained using reactive high power impulse magnetron sputtering (HIPIMS) at a high working pressure of 6.67 Pa (50 mTorr). The average transmittance (450–600 nm) of the SiO2 thin films was 94.45%. In comparison, SiO2 thin films deposited at a low working pressure of 0.27 Pa (2 mTorr) showed an average transmittance of 91.26%. The improvement in the transmittance was attributed to the lower refractive index resulting from the porous structure of the SiO2 thin films. To examine the effect of the anti-reflection SiO2 coating, an a-Si:H solar cell was produced on fluorine-doped tin oxide (FTO) glass. The initial energy conversion efficiency for cells using the anti-reflection, SiO2-coated FTO glass was 11.75%, higher than the 10.75% for the sample using the bare FTO glass. The increase in the short-circuit current density (Jsc) due to the decreased light reflectance was the largest contributor to the increase in the a-Si:H solar cell efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence · Optical Coatings and Gratings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Optical modeling of a-Si:H solar cells deposited on textured glass/SnO2 substrates10.1063/1.1487910 ↗
2. Polycrystalline silicon thin-film solar cells on AIT-textured glass superstrates
3. Disordered submicron structures integrated on glass substrate for broadband absorption enhancement of thin-film solar cells10.1016/j.solmat.2012.02.013 ↗
4. Broadband multilayer antireflection coating for semiconductor laser facets10.1364/OL.20.001154 ↗
5. Multilayer antireflection coatings for the visible and near-infrared regions10.1364/AO.36.006339 ↗
6. Design of multilayer antireflection coatings
7. Design and fabrication of multi-layer antireflection coating for III–V solar cell10.1016/j.cap.2010.09.010 ↗
8. A study on the properties of MgF2 antireflection film for solar cells10.4313/TEEM.2010.11.1.033 ↗
9. Deposition of MgF2 thin films for antireflection coating by using thermionic vacuum arc (TVA)10.1016/j.optcom.2011.12.095 ↗
10. Porous broadband antireflection coating by glancing angle deposition10.1364/AO.42.004573 ↗
11. Nanostructured porous SiO2 films for antireflection coatings10.1016/j.optcom.2010.09.075 ↗
12. Nanostructured multilayer tailored-refractive-index antireflection coating for glass with broadband and omnidirectional characteristics10.1143/APEX.4.052503 ↗
13. Vossen · 1978
14. Lee · 2009
15. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
16. ZnO thin films prepared by high pressure magnetron sputtering
17. Physical properties of high pressure reactively sputtered TiO210.1116/1.2056554 ↗
18. High-pressure reactively sputtered HfO2: composition, morphology, and optical properties10.1063/1.2769959 ↗
19. Titanium oxide thin films deposited by high-power impulse magnetron sputtering10.1016/j.tsf.2006.07.089 ↗
20. The ion energy distributions and ion flux composition from a high power impulse magnetron sputtering discharge10.1016/j.tsf.2006.04.051 ↗
21. High power impulse magnetron sputtering discharge10.1116/1.3691832 ↗