journal article·2019-10

Research on thermal properties of novel silica nanoparticle/binary nitrate/expanded graphite composite heat storage blocks

Qiang Yu, Yuanwei Lu, Cancan Zhang, Yuting Wu, Bengt Sunden

Publisher page

Abstract

Abstract In order to study the effects of EG (expanded graphite) content and SiO2 nanoparticles on the specific heat and thermal conductivity of nano-SiO2/NaNO3–KNO3/EG composite heat storage materials, a series of nano-SiO2/NaNO3–KNO3/EG composites are prepared by the aqueous solution-ultrasound oscillation method. The nano-SiO2/NaNO3–KNO3 and EG with different mass fractions (5%, 10%, 15% and 20%) are used as heat storage material and matrix material, respectively. The specific heat and thermal conductivity of the composite are measured by STA (Simultaneous Thermal Analysis) and LFA (Laser Flash Apparatus), respectively. The results show that nano-SiO2/NaNO3–KNO3/EG composite exhibits obvious better performance than pure binary nitrate NaNO3–KNO3. With 15 wt% EG, the average specific heat (from 250 °C to 430 °C) and thermal conductivity of the composite are 2.574 J/(g·K) and 6.05 W/(m·K), respectively, which are 1.69 times and 9 times higher than that of pure binary nitrate. After adding 1 wt% nano-SiO2 to NaNO3–KNO3/EG (15 wt%) composite, the average specific heat and thermal conductivity increase by 44% and 60.9%, respectively. From the above results, the composite heat storage materials prepared by adding EG and nano-SiO2 into binary nitrate are considered as promising candidate materials for high heat transfer performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A review on modeling and simulation of solar energy storage systems based on phase change materials10.1016/j.est.2018.11.025 ↗
2. Engineering aspects of a molten salt heat transfer fluid in a trough solar field10.1016/S0360-5442(03)00191-9 ↗
3. The preparation and properties of multi-component molten salts10.1016/j.apenergy.2009.06.022 ↗
4. Novel low melting point quaternary eutectic system for solar thermal energy storage10.1016/j.apenergy.2012.09.001 ↗
5. Development of molten salt heat transfer fluid with low melting point and high thermal stability10.1115/1.4004243 ↗
6. Two-tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
7. Review of molten-salt thermocline tank modeling for solar thermal energy storage10.1080/01457632.2012.746152 ↗
8. Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder10.1016/S1359-4311(00)00002-8 ↗
9. Solidification of low conductivity material containing dispersed high conductivity particles10.1016/0017-9310(77)90195-8 ↗
10. Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using beta-Aluminum nitride10.1016/j.apenergy.2008.10.020 ↗
11. Shape-stabilized phase change materials with high thermal conductivity based on paraffin/graphene oxide composite10.1016/j.enconman.2012.11.023 ↗
12. Enhanced comprehensive performance of polyethylene glycol based phase change material with hybrid graphene nanomaterials for thermal energy storage10.1016/j.carbon.2015.03.009 ↗
13. The effect of carbon nanotubes in enhancing the thermal transport properties of PCM during solidification10.1007/s00231-012-0980-3 ↗
14. Experimental investigations on thermal performance enhancement and; effect of orientation on porous matrix filled PCM based heat sink10.1016/j.icheatmasstransfer.2013.05.018 ↗
15. Thermal conductivity enhancement of phase change materials using a graphite matrix10.1016/j.applthermaleng.2005.11.022 ↗
16. Encapsulated phase change materials for energy storage – characterization by calorimetry10.1016/j.solener.2012.10.003 ↗
17. Study on paraffin/expanded graphite composite phase change thermal energy storage material10.1016/j.enconman.2005.03.004 ↗
18. RT100/expand graphite composite phase change material with excellent structure stability, photo-thermal performance and good thermal reliability10.1016/j.solmat.2015.04.008 ↗
19. Preparation and thermal properties of polyethylene glycol/expanded graphite blends for energy storage10.1016/j.apenergy.2008.12.004 ↗
20. Thermal conductivities and characteristics of ternary eutectic chloride/expanded graphite thermal energy storage composites10.1016/j.apenergy.2015.03.020 ↗
21. Novel MgCl2-KCl/expanded graphite/graphite paper composite phase change blocks with high thermal conductivity and large latent heat10.1016/j.solener.2017.10.083 ↗
22. Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials10.1016/j.applthermaleng.2010.11.022 ↗
23. Thermal conductivity of high-temperature multicomponent materials with phase change10.1007/s10765-007-0315-7 ↗
24. KNO3/NaNO3 – graphite materials for thermal energy storage at high temperature: Part I. – elaboration methods and thermal properties10.1016/j.applthermaleng.2010.03.013 ↗
25. Thermal characterization of nitrates and nitrates/expanded graphite mixture phase change materials for solar energy storage10.1016/j.enconman.2013.04.007 ↗
26. Preparation of binary eutectic chloride/expanded graphite as high-temperature thermal energy storage materials10.1016/j.solmat.2015.12.038 ↗
27. Thermal property measurement and heat storage analysis of LiNO3/KCI-expanded graphite composite phase change material10.1016/j.apenergy.2013.11.019 ↗
28. Study on high-temperature phase change composites of NaNO3-LiNO3/expanded graphite by saturated water solution method
29. Enhanced specific heat capacity of high-temperature molten salt-based nanofluids10.1016/j.ijheatmasstransfer.2012.10.062 ↗
30. Specific heat of nanofluids synthesized by dispersing alumina nanoparticles in alkali salt eutectic10.1016/j.ijheatmasstransfer.2014.02.066 ↗
31. Enhanced thermal properties of SiO2 nanocomposite for solar thermal energy storage applications10.1016/j.ijheatmasstransfer.2015.01.100 ↗
32. The enhanced specific heat capacity of ternary carbonates nanofluids with different nanoparticles10.1016/j.solmat.2017.05.032 ↗
33. Effect of nanoparticle dispersion on enhancing the specific heat capacity of quaternary nitrate for solar thermal energy storage application10.1016/j.solmat.2016.07.046 ↗
34. Thermal-physical properties of nanoparticle-seeded nitrate molten salts10.1016/j.renene.2017.12.026 ↗
35. Thermal characterization of NaNO3/KNO3 with different concentrations of Al2O3 and TiO2 nanoparticles10.1007/s10973-018-7980-6 ↗
36. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
37. Effect of nanoparticles on thermal properties of molten salt composite heat storage materials
38. Expanded graphite embedded with aluminum nanoparticles as superior thermal conductivity anodes for high-performance lithium-ion batteries10.1038/srep33833 ↗
39. The shape-stabilized phase change materials composed of polyethylene glycol and various mesoporous matrices (AC, SBA-15 and MCM-41)10.1016/j.solmat.2011.08.020 ↗
40. Particle size effect on thermophysical properties of nanofluid and nanofluid based phase change materials: a review10.1016/j.molliq.2018.05.129 ↗
41. Thermal transport across nanoparticle - fluid interfaces: the interplay of interfacial curvature and nanoparticle - fluid interactions10.1039/C6CP06403E ↗